ASUS H110I-PLUS Motherboard Mini-ITX User Manual

1. Sarrera eta Overview

The ASUS H110I-PLUS/CSM is a Mini-ITX motherboard designed to support 6th Generation Intel Processors. It features DDR4 memory compatibility and incorporates ASUS 5X Protection II hardware safeguards for enhanced durability. This motherboard is suitable for various system deployments, including home theater PCs and space-constrained builds.

Ezaugarri nagusiak hauek dira:

• DDR4 memory compatibility for modern system builds.
• ASUS 5X Protection II for advanced hardware safeguards.
• UEFI BIOS with EZ Flash 3 for intuitive system management and updates.
• Fan Xpert 2+ for advanced fan controls, optimizing cooling and noise levels.
• Integrated HDMI, DVI, and VGA ports supporting dual monitor setups.

Figure 1: The ASUS H110I-PLUS Mini-ITX Motherboard. This image displays the compact form factor and various components of the motherboard, including the CPU socket, RAM slots, and I/O ports.

2. Paketearen edukia

Verify that all items are present in your package. If any items are damaged or missing, contact your retailer.

• 2 x Serial ATA 6.0Gb/s cables
• 1 x I/O blindajea
• 1 x User's manual
• 1 x ASUS H110I-PLUS/CSM Motherboard

3. Konfigurazioa eta instalazioa

This section provides general guidelines for installing your ASUS H110I-PLUS/CSM motherboard. For detailed, step-by-step instructions, refer to the included user's manual.

3.1 Segurtasun-neurriak

• Deskonektatu beti kablea hormako entxufetik edozein osagai ukitu aurretik.
• Use an anti-static wrist strap or frequently touch a grounded metal object to discharge static electricity.
• Osagaiak ertzetik heldu, zati sentikorrak ez ukitzeko.

3.2 Plaka amaierako instalazioa

1. Txasisa prestatu: Install the I/O shield into the chassis opening. Ensure the motherboard standoffs are correctly aligned with the screw holes on the motherboard.
2. Instalatu CPUa: Carefully open the CPU socket (LGA 1151) lever. Align the CPU (6th Gen Intel Processors) with the socket, ensuring the notches match. Gently place the CPU into the socket without forcing it. Close the lever to secure the CPU.
3. CPU hozkailua instalatu: Apply thermal paste (if not pre-applied) and install the CPU cooler according to its manufacturer's instructions. Connect the CPU fan cable to the designated header on the motherboard.
4. Memoria moduluak instalatu: Open the clips on the DDR4 DIMM slots. Align the memory modules with the slots, ensuring the notch on the module matches the key in the slot. Press down firmly on both ends until the clips snap into place.
5. Muntatu plaka basea: Carefully place the motherboard into the chassis, aligning it with the standoffs and I/O shield. Secure the motherboard with screws.
6. Konektatu elikatze-kableak: Connect the 24-pin ATX power connector and the 4-pin CPU power connector from your power supply to the motherboard.
7. Konektatu biltegiratze gailuak: Use the provided Serial ATA 6.0Gb/s cables to connect your storage drives (HDDs/SSDs) to the SATA ports on the motherboard.
8. Konektatu aurrealdeko paneleko kableak: Connect the chassis's front panel connectors (power button, reset button, USB ports, audio jacks, LED indicators) to the corresponding headers on the motherboard. Refer to the user's manual for header locations.
9. Hedapen-txartelak instalatu: If applicable, install any PCIe expansion cards (e.g., graphics card) into the available PCIe slot.

4. Funtzionamendu-argibideak

4.1 Lehenengo abiaraztea eta BIOS konfigurazioa

Upon the first power-on, the system will typically enter the UEFI BIOS utility. Here you can configure system settings, boot order, and monitor hardware status. Press the Ezabatu key during startup to enter the BIOS setup. The ASUS UEFI BIOS with EZ Flash 3 provides an intuitive interface for these configurations.

• Boot Device Priority: Set the primary boot device (e.g., USB drive for OS installation, SSD/HDD).
• System Time/Date: Adjust the system clock if necessary.
• Fan kontrola: Utilize Fan Xpert 2+ settings within the BIOS to customize fan speeds for optimal cooling and noise levels.
• Gorde eta irten: Always save your changes before exiting the BIOS.

4.2 Sistema eragilearen eta kontrolatzaileen instalazioa

After configuring the BIOS, proceed with installing your preferred operating system. Once the OS is installed, install the necessary drivers for the motherboard components. These drivers are typically found on the ASUS support website for your specific model (H110I-PLUS/CSM).

• Txip-multzoaren kontrolatzaileak: Essential for proper communication between the CPU and other components.
• Audio kontrolatzaileak: Soinu funtzionalitaterako.
• LAN gidariak: Sarearen konexiorako.
• Grafikoen kontrolatzaileak: If using integrated graphics, or for any dedicated graphics card.

5. Mantentzea

Mantentze-lan erregularrak zure plaka basearen eta sistemaren iraupena eta errendimendu optimoa bermatzen laguntzen du.

• Hautsa kentzea: Periodically clean dust from inside your computer case, especially from fans and heatsinks, using compressed air. Ensure the system is powered off and unplugged before cleaning.
• BIOS eguneraketak: Egiaztatu ASUSen laguntza website for BIOS updates. BIOS updates can improve system stability, compatibility, and performance. Use the EZ Flash 3 utility within the BIOS for safe updating.
• Gidarien eguneraketak: Keep your drivers updated to ensure compatibility and access to the latest features and bug fixes.
• Kableen kudeaketa: Ziurtatu barneko kableak ondo bideratuta daudela aire-fluxua hobetzeko eta interferentziak saihesteko.

6. Arazoak

If you encounter issues with your system, consider the following troubleshooting steps:

• Argindarrik ez/Abiorik ez:
  • Egiaztatu elikatze-kable guztiak (24 pineko ATX, 4 pineko CPU) plaka basera eta elikatze-iturrira ondo konektatuta daudela.
  • Ziurtatu energia-iturri etengailua ON posizioan dagoela.
  • Check front panel power button connection to the motherboard.
• Ez dago pantailarik:
  • Ensure the monitor is connected to the correct video output (integrated or dedicated graphics card).
  • Reseat the memory modules and any graphics cards.
  • Try booting with only one memory module installed.
• Sistemaren ezegonkortasuna/matxurak:
  • Check CPU and GPU temperatures. Ensure cooling solutions are properly installed.
  • Exekutatu memoriaren diagnostiko tresnak RAM akastuna egiaztatzeko.
  • Ziurtatu gidari guztiak eguneratuta daudela.
• BIOSa berrezartzea: If system settings become problematic, you can reset the BIOS to default settings. This can usually be done via a jumper on the motherboard (Clear CMOS) or through the BIOS menu itself. Refer to the user's manual for specific instructions.

For more advanced troubleshooting, consult the comprehensive user manual or the ASUS support webgunea.

7. Zehaztapen Teknikoak

8. Bermea eta Laguntza

For detailed warranty information, including terms, conditions, and duration, please refer to the warranty card included with your product or visit the official ASUS support website. ASUS provides technical support and resources for its products.

Lineako laguntza: For drivers, manuals, FAQs, and troubleshooting guides, visit the ASUS support webgunea: www.asus.com/support/

Jarri harremanetan laguntzarekin: Contact information for technical assistance can be found on the ASUS support webzure eskualderako gunea.