Crosley C200 Direct-Drive Turntable Instruction Manual

Sarrera

This manual provides detailed instructions for the setup, operation, and maintenance of your Crosley C200 Direct-Drive Turntable. Please read this manual thoroughly before using the product to ensure proper function and longevity.

Segurtasun-argibide garrantzitsuak

• Irakurri argibide guztiak erabili aurretik.
• Gorde eskuliburu hau etorkizunean erreferentzia izateko.
• Ez erabili aparatu hau uraren ondoan.
• Garbitu zapi lehor batekin bakarrik.
• Ez blokeatu aireztapen-irekidurak. Instalatu fabrikatzailearen argibideen arabera.
• Ez instalatu bero-iturri inongo ondoan, esate baterako, erradiadoreak, bero-erregistroak, sukaldeak edo beste aparatu batzuk (barne ampberoa sortzen duten argitzaileak).
• Babestu korronte-kablea oinez ibiltzetik edo atxilotzetik, batez ere entxufeetan, erosotasun-harguneetan eta aparatutik irteten diren puntuetan.
• Erabili soilik fabrikatzaileak zehaztutako eranskinak/osagarriak.
• Deskonektatu aparatu hau tximista-ekaitzetan edo denbora luzez erabiltzen ez duzunean.
• Jarri zerbitzu-zerbitzu guztiak zerbitzu-pertsonal kualifikatuari. Zerbitzua behar da aparatua edozein modutan hondatu denean, hala nola, elikatze-kablea edo entxufea hondatuta dagoenean, likidoa isuri denean edo objektuak aparatura erori direnean, aparatua euria edo hezetasuna jasan duenean, ez du normalean funtzionatzen. , edo erori egin da.

Paketearen edukia

Ensure all items listed below are included in your package:

• Crosley C200 Direct Drive Turntable
• Erabiltzailearen eskuliburua (dokumentu hau)
• Hauts Estalkia
• Transmisio-uhalarekin platera
• Felt Slip Mat
• Kontrapisua
• Head Shell with Audio-Technica Magnetic Cartridge
• 45 RPM egokitzaile
• RCA Output Cables

Osagaiak amaitu diraview

Familiarize yourself with the main components of your turntable.

Konfigurazioa

1. Plater eta Drive uhalaren instalazioa

1. Kontu handiz jarri platera erdiko ardatzean.
2. Locate the drive belt, which is pre-installed on the underside of the platter.
3. Using the red ribbon attached to the drive belt, gently pull the belt over the motor pulley. Ensure the belt is not twisted.
4. Remove the red ribbon.
5. Place the felt slip mat on top of the platter.

2. Tone Arm Assembly and Balancing

1. Kontrapisua instalatu: Slide the counterweight onto the rear of the tone arm with the numbers facing forward.
2. Attach Head Shell: Carefully attach the head shell (with the Audio-Technica cartridge) to the end of the tone arm. Turn the locking nut until it is firmly in place.
3. Kendu arkatz babeslea: Gently remove the clear plastic stylus protector from the cartridge.
4. Tonu-besoa desblokeatu: Release the tone arm from its rest using the tone arm lock.
5. Balance Tone Arm: Adjust the counterweight by rotating it until the tone arm floats parallel to the platter without touching it. The tone arm should be level.
6. Jarraipen-indarra ezarri: Once balanced, hold the counterweight steady and rotate only the numbered ring to '0' on the center line. Then, rotate the entire counterweight counter-clockwise until the number '2' aligns with the center line. This sets the tracking force to 2 grams, which is optimal for the included cartridge.
7. Ezarri irristatzearen aurkakoa: Locate the anti-skating dial near the tone arm base. Set this dial to '2' to match the tracking force.
8. Lock Tone Arm: Return the tone arm to its rest and secure it with the tone arm lock.

3. Audio sistemara konektatzea

1. Connect the RCA output cables from the turntable to your ampargitzaile edo bozgorailu elektrikoak.
2. Use the PHONO/LINE switch on the rear of the turntable to select the appropriate output:
   • FONOA: Use if your amplifier has a dedicated phono input.
   • ILDOA: Use if your amplifier has a standard auxiliary input or if connecting to powered speakers. The turntable's built-in pre-amplifier will be active.
3. Connect the power adapter to the turntable and then to a wall outlet.

Funtzionamendu-argibideak

1. Disko bat erreproduzitzea

1. Place a record on the platter. If playing a 45 RPM single, use the included 45 RPM adapter.
2. Select the correct speed (33 1/3 or 45 RPM) using the speed selector switch.
3. Unlock the tone arm from its rest.
4. Lift the cueing lever to raise the tone arm.
5. Manually position the tone arm over the desired starting groove of the record.
6. Gently lower the cueing lever to allow the stylus to descend onto the record.
7. To stop playback, lift the cueing lever, return the tone arm to its rest, and lock it.

2. Bluetooth Connectivity (Built-In Receiver)

The Crosley C200 features a built-in Bluetooth receiver, allowing you to stream audio from a Bluetooth-enabled device to the turntable's output. This means you can use the turntable as a Bluetooth speaker for your phone or tablet.

1. Ziurtatu platoa piztuta dagoela.
2. Activate Bluetooth pairing mode on your external device (e.g., smartphone, tablet).
3. Bilatu "Crosley C200" in your device's Bluetooth settings and select it to pair.
4. Once paired, audio from your device will play through the turntable's connected speakers/ampbiziagoa.

Oharra: The Bluetooth feature is for receiving audio to the turntable, not for transmitting audio tik the turntable to Bluetooth speakers.

Mantentzea

1. Arkatza garbitzea

• Use a soft brush designed for stylus cleaning.
• Brush gently from back to front (in the direction of the stylus's movement across the record).
• Do not brush from side to side, as this can damage the stylus.

2. Biragailuaren garbiketa

• Wipe the dust cover and turntable cabinet with a soft, dry cloth.
• Saihestu produktu kimiko gogorrak edo garbitzaile urratzaileak erabiltzea.

3. Replacing the Stylus

The stylus should be replaced after approximately 300-500 hours of playback. Refer to the Audio-Technica cartridge manual for specific replacement instructions or consult a qualified technician.

Arazoak konpontzea

Zehaztapenak

• Eredua: C200A-BK
• Marka: Crosley
• Drive mota: Zuzeneko Drive
• Motorra: Momentu handikoa
• Abiadurak: 33 1/3, 45 RPM
• Eragiketa: Guztiz eskuzkoa
• Tone Arm: Balanced S-Shaped with hydraulic lift control, anti-skate, height adjustment, and lockable rest
• Kartutxoa: Audio-Technica kartutxo magnetikoa
• Aurretikampbiziagoa: Built-in switchable phono pre-ampbiziagoa
• Irteerak: Detachable RCA output cables
• Platerua: Damped die-cast aluminum with felt slip mat
• Ezaugarri berezia: Bluetooth hargailua integratua
• Materiala: Aluminum (platter), Black finish
• Produktuaren neurriak: 11.02 x 17.72 x 5.47 hazbete
• Elementuaren pisua: 11.02 kilo
• Gailu bateragarriak: Hizlaria, Amplifier, AV hargailua

Bermea eta Laguntza

For warranty information, please refer to the documentation included with your purchase or visit the official Crosley website. For technical support or service inquiries, please contact Crosley customer service.

Fabrikatzailea: Crosley

Lehen eskuragarri dagoen data: 22ko abenduaren 2015a

Produktu Ofizialaren Bideoak