PlayStation VRrako PowerA kargatzeko eta bistaratzeko estazioaren argibideen eskuliburua

Sarrera

The PowerA Charge & Display Station is designed to provide a secure and organized solution for your PlayStation VR headset, DUALSHOCK 4 controller, and PlayStation Move controllers. This station allows for simultaneous charging of one DUALSHOCK 4 controller and two PlayStation Move controllers, while also serving as a dedicated display stand for your PlayStation VR headset. This manual provides essential information for proper setup, operation, and maintenance of your device.

Paketearen edukia

• PowerA Charge & Display Station
• AC Potentzia Egokitzailea

Segurtasun Informazioa

• Irakurri argibide guztiak gailua erabili aurretik.
• Mantendu gailua uretatik edo gehiegizko hezetasunetik urrun.
• Ez saiatu gailua desmuntatzen edo aldatzen.
• Use only the provided AC power adapter.
• Ziurtatu gailua behar bezala aireztatuta dagoela inguruan funtzionamenduan zehar.
• Place the station on a stable, flat surface to prevent tipping.

Konfigurazioa

1. Unpack the Station: Kontu handiz kendu osagai guztiak ontzitik.
2. Assemble the Station: Connect the vertical stand to the base unit. Ensure it clicks securely into place.
3. Konektatu energia: Insert the small end of the AC power adapter into the power input port located at the rear of the station's base.
4. Kable elektrikoaren ibilbidea: Utilize the cable management grooves on the underside of the base to route the power cable neatly. There are grooves for rear, left, and right exits.
5. Konektatu entxufean: Entxufatu AC korronte-egokigailua hormako entxufe estandar batean.

The back of the station, featuring the power input and integrated cable management channels to keep your setup tidy.

Aldeko profile of the Charge & Display Station, illustrating the support structure for the PSVR headset and the charging docks for controllers.

Funtzionamendu-argibideak

1. Displaying the PSVR Headset:
   • Gently place your PlayStation VR headset onto the designated cradle at the top of the station.
   • Adjust the headset's band to ensure a secure and stable fit on the stand. This helps prevent accidental slipping.
   • Route the headset's cable around the stand for organized storage.
2. Charging DUALSHOCK 4 Controller:
   • Align the DUALSHOCK 4 controller with the charging port on the front-left dock of the station.
   • Press the controller down firmly onto the spring-loaded connector until it seats properly.
   • A light indicator on the controller will illuminate, confirming that charging has begun.
3. Charging PlayStation Move Controllers:
   • Insert each PlayStation Move controller into its respective charging slot on the front-right of the station.
   • Ensure the controllers are fully seated in the docks for a proper connection.
   • The indicator lights on the Move controllers will show their charging status.

The PowerA Charge & Display Station, fully assembled and ready to hold and charge your PlayStation VR headset, DUALSHOCK 4 controller, and PlayStation Move controllers.

The PlayStation VR headset positioned on its dedicated stand. Adjust the headset band for a secure fit on the display cradle.

Detail of the DUALSHOCK 4 controller charging dock. Ensure the controller is firmly seated for proper connection and charging.

Detail of the PlayStation Move controller charging docks. Place controllers securely into the slots for charging.

Mantentzea

• Garbiketa: Disconnect the power adapter before cleaning. Use a soft, dry cloth to wipe the surface of the station. Do not use abrasive cleaners or solvents.
• Biltegiratzea: When not in use for extended periods, store the station in a cool, dry place.

Arazoak konpontzea

• Controllers Not Charging:
  • Ensure the power adapter is securely connected to both the station and the wall outlet.
  • Verify that controllers are properly seated in their respective charging docks. For DUALSHOCK 4, ensure it is pressed down firmly onto the spring-loaded connector.
  • Check for any obstructions or debris in the charging ports.
• PSVR Headset Slips Off Stand:
  • Ensure the PSVR headset's adjustable band is tightened to its default or a smaller size when placed on the stand. A loose band may cause the headset to slip.
  • Confirm the station is on a stable, level surface.

Zehaztapenak

• Modelo zenbakia: 1426810-01
• Produktuaren neurriak: 13.4 x 9.5 x 5.6 hazbete
• Elementuaren pisua: 1.88 kilo
• Fabrikatzailea: gainditzeko
• Bateragarritasuna: PlayStation VR Headset, DUALSHOCK 4 Controller, PlayStation Move Controllers

Bermea eta Laguntza

For warranty information and technical support, please refer to the official PowerA webwebgunera edo jarri harremanetan zuzenean bezeroarentzako arreta-zerbitzura. Gorde erosketaren frogagiria berme-erreklamazioetarako.