BONTEC MTR-B2 2-Tier Wood Monitor Stand Riser Instruction Manual

Sarrera

This manual provides instructions for the assembly, operation, and maintenance of your BONTEC MTR-B2 2-Tier Wood Monitor Stand Riser. This product is designed to elevate your monitor to an ergonomic height, reduce neck and back strain, and organize your workspace with its integrated storage and cable management features.

Produktuaren Ezaugarriak

Kalitate handiko materialak: Constructed from eco-friendly MDF wood with a smooth finish for durability and stability.
Diseinu ergonomikoa: Elevates your screen by 5.6 inches to eye level, promoting healthier posture and reducing strain.
Spacious 2-Tier Storage: Ematen du ample space (21.3 inches wide) for laptops, keyboards, and other desk essentials.
Kableen kudeaketa integratua: Features a built-in system and cellphone holder to keep your workspace organized and clutter-free.
Muntaketa erraza: Muntaketa azkar eta errazerako diseinatua.
Diseinu egonkorra: Includes soft rubber feet to ensure stability and protect your desk surface.

Diagram illustrating ergonomic benefits of a monitor stand — **Figure 1: Ergonomic Benefits.** This diagram shows the difference in posture with and without a monitor riser, highlighting how the stand helps maintain a straight back and reduces neck strain.

Paketearen edukia

Please verify that all components are present before beginning assembly. Refer to the assembly diagram for visual identification.

Top Shelf Board (x1)
Side Support Boards (x2)
Erdiko Apalategiko Ohola (x1)
Connecting Screws (Type A, x6)
Cam Locks (Type B, x6)
Wooden Dowels (Type C, x4)
Rubber Feet (Type D, x6)
Cable Management Clip (Type E, x1)

Assembly diagram showing all parts and steps for the monitor stand — **Figure 2: Assembly Components.** This image displays all individual parts and hardware included in the package, along with a step-by-step visual guide for assembly.

Muntatzeko jarraibideak

Follow these steps to assemble your BONTEC MTR-B2 Monitor Stand Riser. A screwdriver is required (not included).

Step 1: Attach Connecting Screws to Top Shelf. Insert 4 connecting screws (Type A) into the pre-drilled holes on the underside of the top shelf board. Ensure they are securely fastened.
Step 2: Attach Wooden Dowels to Side Supports. Insert 2 wooden dowels (Type C) into the corresponding holes on the inner side of each side support board.
Step 3: Connect Side Supports to Middle Shelf. Align the middle shelf board with the wooden dowels on the side support boards. Secure the middle shelf to the side supports using 2 cam locks (Type B) on each side. Turn the cam locks clockwise until tight.
Step 4: Attach Top Shelf to Assembled Base. Align the top shelf (with connecting screws from Step 1) with the holes on the top edges of the assembled side and middle shelves. Secure the top shelf using the remaining 2 cam locks (Type B) on each side. Turn clockwise until tight.
Step 5: Apply Rubber Feet. Attach the 6 rubber feet (Type D) to the bottom corners and center of the stand to prevent scratching and ensure stability.
Step 6: Install Cable Management Clip. Attach the cable management clip (Type E) to the desired side of the stand for organizing cables.

Note: Do not overtighten screws to avoid damaging the wood.

Detailed step-by-step assembly instructions for the BONTEC monitor stand — **Figure 3: Visual Assembly Guide.** This diagram provides a visual representation of each assembly step, showing component placement and hardware usage.

Funtzionamendu-argibideak

Your BONTEC MTR-B2 Monitor Stand Riser is designed for versatile use to enhance your workspace.

Monitorearen kokapena: Place your monitor securely on the top surface of the stand. Ensure the monitor's base fits within the dimensions of the stand.
Keyboard Storage: Utilize the space beneath the middle shelf to store your full-size keyboard when not in use, freeing up desk space.
Osagarriak biltegiratzea: The middle shelf and side compartments are ideal for organizing notebooks, pens, external hard drives, or other small office supplies.
Cellphone Holder: Use the integrated slot on the top surface to hold your cellphone upright. The slot is designed to allow charging cables to pass through for convenience.
Kableen kudeaketa: Route power cords and data lines through the attached cable management clip to keep them tidy and prevent tangles.

Monitor stand in use with a monitor, phone, and speaker on top, and keyboard underneath — **4. irudia: Antolatutako lan-eremua.** This image demonstrates the monitor stand in a typical setup, showcasing how it elevates the monitor and provides organized storage for various desk items.

Close-up of the monitor stand's phone holder with a phone and charging cable, and rubber feet — **Figure 5: Phone Holder and Stability.** Xehetasun bat view of the integrated cellphone holder, showing a phone being charged, and the non-slip rubber feet at the base of the stand.

Cable management clip on the side of the monitor stand organizing power and data cables — **6. irudia: Kableen kudeaketa.** This image highlights the cable management clip attached to the side of the stand, effectively organizing power and data cables.

Monitor stand with a full-size keyboard stored underneath — **Figure 7: Keyboard Storage.** The image shows a full-size keyboard neatly stored in the lower tier of the monitor stand, demonstrating efficient use of space.

Mantentzea

To ensure the longevity and appearance of your monitor stand, follow these simple maintenance guidelines:

Garbiketa: Garbitu gainazala leun batekin, damp oihal. Saihestu produktu kimiko gogorrak edo garbitzaile urratzaileak erabiltzea, akabera kaltetu baitezakete.
Hautsa botatzea: Aldian-aldian hautsa kendu euskarria pilaketa saihesteko.
Egonkortasunaren egiaztapena: Aldian-aldian egiaztatu torloju eta konexio guztiak ondo estututa daudela ziurtatzeko. Beharrezkoa bada, berriro estutu.
Gehiegizko pisua saihestu: Do not exceed the maximum load capacity of 66 pounds (30 kg) to prevent damage or instability.
Babestu hezetasunetik: Keep the stand away from excessive moisture or direct sunlight to prevent warping or discoloration of the wood.

Arazoak konpontzea

If you encounter any issues with your BONTEC MTR-B2 Monitor Stand Riser, refer to the following common solutions:

Arazoa	Kausa posiblea	Irtenbidea
Euskarria ezegonkorra edo ezegonkorra da.	Screws are loose; uneven surface; missing rubber feet.	Ensure all connecting screws and cam locks are tightened. Place the stand on a flat, stable surface. Verify all rubber feet are attached.
Zailtasunak muntaian zehar.	Piezaren orientazio okerra; hardwarea falta da.	Review the assembly instructions and diagrams carefully. Ensure parts are oriented correctly. Check package contents against the list. Do not force parts together.
Monitor does not fit on the stand.	Monitor base is too large for the stand's top surface.	Verify your monitor's base dimensions against the stand's top surface dimensions (21.26 x 10.04 inches).

Zehaztapenak

Atributua	Xehetasuna
Modelo zenbakia	MTR-B2
Marka	BONTEC
Materiala	Egur landua (MDF)
Kolorea	Beltza
Produktuaren neurriak (L x W x H)	21.26 x 10.04 x 5.59 hazbete (540 x 255 x 142 mm)
Elementuaren pisua	7 libra (3.17 kg)
Karga Ahalmena	66 libra (30 kg)
Muntaia Beharrezkoa	Bai
Ezaugarri Berezia	Lightweight, 2-Tier Storage, Cable Management, Cellphone Holder

Diagram showing the dimensions of the BONTEC monitor stand in millimeters — **8 irudia: Produktuaren neurriak.** This image provides a detailed diagram of the monitor stand's dimensions, including width, depth, and height, in millimeters.

Produktuen bideoak

BONTEC 2-Tier Wood Monitor Stand Riser Overview

Video 1: Product Features and Installation Steps. Bideo honek informazio osoa eskaintzen duview of the BONTEC 2-Tier Wood Monitor Stand Riser, highlighting its key features, dimensions, and a visual guide for assembly. It demonstrates how the stand helps organize your desktop and supports a full-size keyboard.

BONTEC Extra Long 21.3 Inch 2 Tiers Wood Monitor Stand

Video 2: Detailed Product View. This video offers a closer look at the extra-long 21.3-inch BONTEC monitor stand, emphasizing its two-tier design and how it accommodates various desk setups for improved organization and ergonomics.

Bermea eta Bezeroarentzako Arreta

BONTEC is committed to providing high-quality products and exceptional customer service. If you encounter any issues with your monitor stand, please do not hesitate to contact our dedicated support team.

Our customer support is available to address any concerns you may have and ensure your experience is satisfactory. Please refer to your purchase documentation or the BONTEC webwebgunea bermearen xehetasun zehatzak eta harremanetarako informazioa lortzeko.

	BONTEC MTR-S3 Dual Monitor Stand Riser Installation Guide Official installation guide for the BONTEC MTR-S3 Dual Monitor Stand Riser. Learn how to assemble your ergonomic wooden desktop organizer with smartphone holder.
	Bontec MTR-S3 Dual Monitor Stand Riser Assembly Instructions Step-by-step guide for assembling the Bontec MTR-S3, MTR-S3-WH, and MTR-S3-ZM dual monitor stand riser. Includes parts list and assembly instructions.
	BONTEC Black Clamp-on Teklatuaren Erretiluaren Argibide Eskuliburua BONTEC Black Cl-ren argibide eskuliburuaamp-an teklatuaren erretiluan (KMT01-HD modeloa), paketearen edukia, muntaketa-urratsak, zehaztapenak, neurriak eta behar bezala instalatu eta erabiltzeko bateraezinak diren mahaigaineko motak zehaztuz.
	BONTEC GDM7501 Gas Spring Monitor Mount Installation Instructions Detailed installation guide for the BONTEC GDM7501 gas spring monitor mount, covering clamp and grommet base setup, VESA plate attachment, arm installation, adjustments, and cable management.
	BONTEC FN-411 TV Cart Stand Installation Guide Detailed installation instructions for the BONTEC FN-411 Mobile TV Cart Stand, including component checklist and step-by-step assembly guidance for 32-85 inch TVs.
	BONTEC Mobile Workstation Assembly Instructions MWS-001BK Detailed assembly instructions for the BONTEC MWS-001BK Mobile Workstation, a height-adjustable stand suitable for podium, lectern, and laptop use.

BONTEC MTR-B2