Sarrera
This manual provides comprehensive instructions for the safe and proper installation and operation of your SANUS VLT6-B1 Premium Tilting TV Wall Mount. This mount is designed to securely hold flat-panel televisions ranging from 46 to 90 inches and weighing up to 150 lbs. Please read all instructions carefully before beginning installation.
Segurtasun Informazioa
- Pisu-gaitasuna: Ez gainditu 150 lb-ko (68 kg) gehienezko pisu-gaitasuna.
- Telebistaren tamaina: Ensure your TV's screen size is between 46 and 90 inches.
- Horma mota: This mount is designed for installation on wood studs (16-24 inch on-center) or solid concrete/concrete block walls. Do not install on drywall alone.
- Tresnak: Use appropriate tools and follow all safety precautions for power tools.
- Laguntza: Two people are recommended for safe installation, especially when lifting the TV.
- Kableen kudeaketa: Ziurtatu kable guztiak segurtasunez bideratuta daudela eta ez dutela euskarriaren mugimendua oztopatzen.
Paketearen edukia
Instalazioarekin jarraitu aurretik, egiaztatu osagai guztiak daudela eta kalterik gabe daudela. Piezarik falta edo kaltetuta badago, jarri harremanetan bezeroarentzako arreta-zerbitzuarekin.
Irudia: All-inclusive hardware and mount components for the SANUS VLT6-B1.
- Hormako plakaren muntaketa
- Telebistako euskarriak (2)
- Muntatzeko hardware kit-a (telebistarako eta hormarako hainbat torloju, arandela, tartekatzaileak)
- Zulatzeko txantiloia
- Burbuila Maila Magnetikoa
- Argibide eskuliburua
Konfigurazioa eta Instalazioa
Installation typically takes around 30 minutes. Follow these steps for a secure setup.
Bideoa: Official SANUS video demonstrating the installation process for the Premium Tilting TV Mount.
- Aurre-instalazioa:
- Determine the desired TV height and location on the wall.
- Locate wall studs using a stud finder or ensure the concrete wall is suitable.
- Use the provided drill template to mark pilot hole locations.
- Secure Wall Plate:
Irudia: Visual guide for DIY-friendly installation, including securing the wall plate to studs or concrete.
- Egin zulo pilotuak markatutako tokietan.
- Attach the wall plate securely to the wall using the appropriate hardware for your wall type. The open wall plate design allows mounting over electrical outlets.
- Telebistako euskarriak lotu:
- Jarri telebista kontu handiz aurpegia behera gainazal leun eta garbi batean.
- Attach the two TV brackets to the back of your TV using the correct screws, washers, and spacers from the hardware kit. Ensure they are tightened securely.
- Telebista hormako plakan muntatzea:
- With assistance, carefully lift the TV and hook the attached brackets onto the wall plate.
- Ensure the TV is properly seated and locked into place.
- Use the leveling and centering features to fine-tune the TV's position even after it's on the wall.
- Kableen kudeaketa:
- Route all necessary cables through the integrated cable management channels on the mount arms.
- The 5.7-inch extension provides ample space for easy cable access and routing.
Funtzionamendu-argibideak
The SANUS VLT6-B1 mount offers flexible viewaukerak:
Irudia: Illustration of the 12-degree tilt feature for glare reduction and optimal viewing.
- Inklinazioa: The mount features 12 degrees of advanced tilt. This is ideal for reducing glare from windows or lights, especially when the TV is mounted above eye level (e.g., above a fireplace). Adjust the tilt by gently pushing or pulling the top or bottom of the TV.
- Luzapena: The mount extends 5.7 inches from the wall. This extension allows for maximum tilt range and provides easy access to cables behind the TV. When not needed, the TV can be effortlessly pushed back closer to the wall for a low-profile itxura.
- Leveling and Centering: After installation, the TV can be height-adjusted and leveled to fine-tune your view, even if wall studs are off-center.
Mantentzea
- Garbiketa: Garbitu euskarria zapi leun eta lehor batekin. Saihestu garbitzaile edo disolbatzaile urratzaileak.
- Aldizkako egiaztapenak: Aldian-aldian egiaztatu torloju eta konexio guztiak ondo estututa eta finkatuta daudela ziurtatzeko.
- Mugimendua: If the mount's movement becomes stiff, apply a small amount of silicone-based lubricant to the moving parts.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Telebista ez dago maila berean | Deslerrokatze txikia instalazioan zehar. | Use the post-installation leveling adjustment feature to correct. |
| Mount solte sentitzen da | Screws may have loosened over time. | Retighten all mounting screws on the wall plate and TV brackets. |
| Difficulty tilting/extending | Mechanism may be stiff or cables are interfering. | Check for cable interference. Apply silicone lubricant to moving joints if needed. |
| Cannot attach TV to wall plate | TV brackets not correctly aligned or installed. | Ensure TV brackets are installed according to VESA pattern and are not obstructed. |
Zehaztapenak
- Modelo zenbakia: VLT6-B1
- Marka: Sanus
- Materiala: Altzairu aleazioa
- Kolorea: Beltza
- Muntatze mota: Hormako Muntaia
- Mugimendu mota: Okertu
- Gailu bateragarriak: Telebista
- Telebistako tamainaren bateragarritasuna: 46" - 90"
- Pisu-gaitasuna: Gehienez 150 lb (68 kg)
- Inklinazio angelu maximoa: 12 gradu
- Hormatik luzapena: 5.7 hazbetekoa
- VESA ereduak: 200x100 through 690x415
- Produktuaren neurriak: 32.5 x 10.9 x 3 hazbete
- Elementuaren pisua: 0.01 ontza
- UPC: 793795530936
Bermea eta Laguntza
The SANUS VLT6-B1 Premium Tilting TV Wall Mount comes with a 5-year warranty.
For any questions or assistance with installation, please contact SANUS's US-based customer care team. Our experts are available 7 days a week to provide support.
Harremanetarako informazioa: Refer to the product packaging or the official SANUS website for the most current customer support details.
