Sarrera
The Lenco LS-50WD is a modern turntable designed for playing vinyl records. It features two built-in speakers, allowing for immediate audio playback without external equipment. The turntable supports multiple playback speeds (33, 45, and 78 RPM) to accommodate various record types. For enhanced audio, an RCA output is provided for connection to external speakers or an amplifier. Additionally, a USB port enables the conversion of vinyl records into digital formats for archiving or playback on other devices.
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Lenco LS-50WD turntable. Please read it thoroughly before using the device to ensure proper function and longevity.
Segurtasun-argibideak
- Irakurri arretaz argibide guztiak erabili aurretik.
- Gorde eskuliburu hau etorkizunean erreferentzia izateko.
- Ez jarri unitatea euripean edo hezetasunean, suteak edo deskarga elektrikoak saihesteko.
- Ziurtatu korronte-egokitzailea zure tokiko korronte-hornidurarekin bateragarria dela.
- Ez blokeatu aireztapen baoak.
- Jarri unitatea gainazal egonkor eta berdinean.
- Saihestu unitatea bero-iturri edo eguzki-argi zuzenaren ondoan jartzea.
- Deskonektatu unitatea tximista-ekaitzetan edo denbora luzez erabiltzen ez duzunean.
- Ez saiatu unitatea zeuk konpontzen. Konponketa guztiak langile kualifikatuei eskatu.
Paketearen edukia
Egiaztatu behean zerrendatutako elementu guztiak paketean sartuta daudela:
- Lenco LS-50WD biraketa-unitatea
- Hauts Estalkia
- 45 RPM egokitzaile
- DC korronte egokitzailea
- Argibide eskuliburua (dokumentu hau)
Produktua amaituview
Familiarize yourself with the components of your Lenco LS-50WD turntable.
1. irudia: Aurrealdea view of the Lenco LS-50WD turntable with the dust cover open, showing the platter, tonearm, and controls.
2. irudia: Gertutik view of the tonearm assembly, including the stylus and counterweight adjustment area.
3. irudia: Rear panel showing the RCA audio output (L/R), USB port, DC 12V power input, and power ON/OFF switch.
4. irudia: Amaituview of the Lenco LS-50WD highlighting key features: 2 built-in speakers, 33/45/78 RPM speeds, auto-stop function, RCA output, and PC connection via USB.
Konfigurazioa
- Despaketatzea: Kontu handiz atera birakari-plataforma eta osagarri guztiak paketetik. Gorde paketea etorkizunean garraiatzeko edo biltegiratzeko.
- Lekua: Place the turntable on a stable, level surface away from direct sunlight, heat sources, and strong vibrations.
- Hauts-estalkiaren instalazioa: Attach the provided dust cover to the hinges at the rear of the turntable. This protects the platter and stylus from dust when not in use.
- Potentzia-konexioa: Connect the DC power adapter to the DC 12V input port on the rear of the turntable (refer to Figure 3). Plug the adapter into a suitable wall outlet.
- External Speaker Connection (Optional): If you wish to use external speakers, connect an RCA audio cable (not included) from the RCA L/R output ports on the rear of the turntable (refer to Figure 3) to the corresponding audio input on your ampargitzaile edo hiztun aktiboak.
- Kontrapisuaren doikuntza: The turntable features an adjustable counterweight. This allows for fine-tuning of the stylus pressure for optimal sound quality and to prevent damage to your records. Consult the specific instructions for your cartridge type for the recommended tracking force. Generally, you will balance the tonearm until it floats freely, then rotate the counterweight to the recommended tracking force.
Funtzionamendu-argibideak
- Piztu: Flip the power switch on the rear panel to the 'ON' position (refer to Figure 3).
- Erregistroaren kokapena: Place a vinyl record onto the turntable platter. If playing a 7-inch single, place the 45 RPM adapter onto the spindle first.
- Abiadura aukeraketa: Select the appropriate playback speed (33, 45, or 78 RPM) using the speed selector switch, usually located near the platter. Ensure the selected speed matches the record you are playing.
- Hasi erreprodukzioa:
- Astiro-astiro altxa besoa seinaleztapen palanka erabiliz.
- Mugitu besoa diskoaren nahi duzun hasierako ildoaren gainetik.
- Jaitsi poliki-poliki besoa seinale palanka erabiliz. Estiletak diskoarekin kontaktua egingo du eta erreprodukzioa hasiko da.
- Bolumenaren doikuntza: Adjust the volume using the volume knob on the turntable or your connected external audio system.
- Auto-Stop funtzioa: The LS-50WD features an auto-stop function that automatically stops the platter rotation when the tonearm reaches the end of a record. This helps prevent unnecessary wear on the stylus and record.
- Erreprodukzioa gelditzea:
- Altxa besoa seinaleztapen palanka erabiliz.
- Return the tonearm to its rest position.
- Lower the cueing lever to secure the tonearm.
- USB Recording (Digitization):
- Connect the turntable's USB port (refer to Figure 3) to your computer using a USB cable (not included).
- Install appropriate audio recording software on your computer (e.g., Audacity, available online).
- Follow the software's instructions to select the turntable as the input device and begin recording your vinyl playback.
- Itzali: When finished, flip the power switch on the rear panel to the 'OFF' position.
Mantentzea
- Unitatea garbitzea: Garbitu biragailuaren gainazala oihal leun, lehor eta lihorik gabeko batekin. Ez erabili garbitzaile, argizari edo disolbatzaile urratzailerik.
- Hauts-estalkia: Garbitu hauts-estalkia oihal leun etaamp oihal. Saihestu plastikoa urra edo lainotu dezaketen produktu kimiko gogorrak.
- Stylus zaintzea: The stylus (needle) is a delicate component. Clean it periodically using a soft brush designed for stylus cleaning, brushing gently from back to front. Replace the stylus when signs of wear are visible (e.g., distorted sound, skipping).
- Erregistroen zaintza: Keep your records clean and free of dust to prolong their life and the life of your stylus. Store records vertically in their sleeves.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Botererik ez | Korronte-egokitzailea ez dago konektatuta edo entxufea akastuna da. | Ensure power adapter is securely connected and the outlet is functional. Check the power switch on the rear. |
| Bozgorailu integratuetatik ez dago soinurik | Volume too low; tonearm not lowered onto record. | Increase volume. Ensure the tonearm is properly lowered onto a spinning record. |
| No sound from external speakers | RCA cables not connected correctly; external amplifier/speakers off or input not selected. | Check RCA cable connections. Ensure external amplifier/speakers are powered on and set to the correct input. |
| Soinua distortsionatuta edo saltoka | Dirty record or stylus; incorrect tracking force; turntable not level. | Clean record and stylus. Adjust counterweight for correct tracking force. Ensure turntable is on a level surface. |
| Erreprodukzio-abiadura okerra | Abiadura okerra hautatu da. | Verify the speed selector switch matches the record's required RPM (33, 45, or 78). |
Zehaztapenak
| Marka | Lenco |
| Eredua | LS-50WD |
| Produktuaren neurriak (L x W x H) | 12.44 x 16.22 x 4.65 hazbete (31.6 x 41.2 x 11.8 cm) |
| Elementuaren pisua | 5.5 libra (2.5 kilogramo) |
| Energia iturria | DC Adapter, 12 Volts |
| Erreprodukzio-abiadurak | 33, 45, 78 RPM |
| Bozgorailu integratuak | Bai (2x) |
| Audio Irteera | RCA L/R |
| Konektibitatea | USB 2.0 Port (for PC connection/digitization) |
| Materiala | Ingeniaritzazko egurra, egurra |
| Ezaugarri Berezia | Direct-Drive, Auto-Stop |
| Dakarten osagaiak | Dust cover, 45 RPM adapter, DC power adapter |
Oharra: zehaztapenak aldatu egin daitezke, jakinarazi gabe.
Bermea eta Laguntza
Bermeari buruzko informazioa eta laguntza teknikoa lortzeko, mesedez, kontsultatu zure produktuarekin batera datorren berme-txartela edo bisitatu Lencoren webgune ofiziala. webgunea. Gorde erosketaren egiaztagiria berme-erreklamazioetarako.
If you encounter issues not covered in the troubleshooting section, please contact Lenco customer support for assistance.
