MOOER UK Gold 900 Micro Preamp (M002) Instruction Manual

Ezaugarri nagusiak

• High-quality dual-channel preamp.
• Independent 3-band EQ (Treble, Mid, Bass) for each channel.
• Independent Gain and Volume controls for each channel.
• Switchable speaker cabinet simulation.
• Two footswitch operating modes: On/Off or Channel A/B switching.
• Metalezko karkasa trinkoa eta iraunkorra.

Kontrolak eta konexioak

Irudia: Aurrealdea view of the MOOER UK Gold 900 Micro Preamp, showing the control knobs and footswitch.

• TRE (Treble) botoia: Maiztasun handiko erantzuna doitzen du.
• MID (Erdiko) botoia: Erdi-mailako maiztasun-erantzuna doitzen du.
• BASS botoia: Maiztasun baxuko erantzuna doitzen du.
• GAIN botoia: Controls the amount of overdrive/distortion.
• VOL (Bolumena) botoia: Irteera maila orokorra doitzen du.
• CH/CAB botoia:
  • Press to switch between Channel A and Channel B.
  • Press and hold to toggle the speaker cabinet simulation on or off.
• Oinen etengailua: Activates or bypasses the preamp, or switches between channels depending on the selected mode.
• Sarrera Jack: Konektatu gitarra edo beste tresna bat.
• Irteerako Jack: Konektatu batera ampargitzailea, nahasgailua edo audio interfazea.
• DC 9V potentzia sarrera: Connect a 9V DC power adapter (center negative, 300mA minimum).

Irudia: Atzealdea view of the MOOER UK Gold 900 Micro Preamp, showing the 9V DC power input.

Irudia: Albokoa view of the MOOER UK Gold 900 Micro Preamp, illustrating the input and output jacks.

Konfigurazioa

1. Potentzia-konexioa: Connect a 9V DC power adapter (center negative, 300mA minimum) to the DC 9V input jack on the rear of the unit. Ensure the power supply meets these specifications to prevent damage.
2. Tresnaren konexioa: Connect your guitar or other instrument to the INPUT jack on the right side of the preamp using a standard 1/4-inch instrument cable.
3. Irteerako konexioa: Connect the OUTPUT jack on the left side of the preamp zuregana amplifier's input, effects loop return, or an audio interface/mixer.
4. Hasierako ezarpenak: Before powering on, set all control knobs (TRE, MID, BASS, GAIN, VOL) to their minimum positions to avoid sudden loud sounds.
5. Piztu: Once all connections are secure, apply power to the unit. The LED indicator will illuminate.

Funtzionamendu-argibideak

Kanalaren hautaketa

The UK Gold 900 features two channels, A and B, each with independent EQ, Gain, and Volume settings.

• To switch channels: Briefly press the CH/CAB button. The LED color will change to indicate the active channel (e.g., green for Channel A, red for Channel B).

Speaker Cabinet Simulation

Preamp includes an integrated speaker cabinet simulation, which is useful for direct recording or connecting to a PA system.

• To toggle cabinet simulation: Press and hold the CH/CAB button for approximately 2 seconds. The LED will flash to indicate the change.

Footswitch moduak

The footswitch can operate in two different modes:

1. Piztu/Itzali modua: In this mode, the footswitch acts as a bypass, turning the preamp eragina piztu edo itzali.
2. A/B kanal modua: In this mode, the footswitch switches between Channel A and Channel B.

Refer to the product's full manual or manufacturer's website for instructions on how to switch between these footswitch modes, as this functionality is typically configured via a hidden switch or specific power-up sequence.

Tonuaren doikuntza

Adjust the following controls to shape your sound:

• IRABAZIA: Increase for more overdrive and distortion. Decrease for cleaner tones.
• BOL: Doitu irteerako bolumen orokorra.
• TRE, MID, BASS: Use these three knobs to fine-tune the equalization for your desired tone.

Mantentzea

• Garbiketa: Erabili zapi leun eta lehor bat unitatea garbitzeko. Ez erabili garbitzaile likidorik edo disolbatzailerik.
• Biltegiratzea: Aurrez gorde.amp in a dry environment, away from extreme temperatures and direct sunlight.
• Elikatze-iturria: Always use the specified 9V DC (center negative) power supply. Incorrect power can damage the unit.
• Konexioak: Ensure all cables are securely connected but do not overtighten. Disconnect cables when the unit is not in use for extended periods.

Arazoak konpontzea

• Soinurik ez:
  • Egiaztatu kable guztien konexioak (sarrera, irteera, potentzia).
  • Ziurtatu energia-iturria behar bezala konektatuta dagoela eta funtzionatzen duela.
  • Verify that the volume knobs on the preamp eta zure amplifier are not set to zero.
  • Test with different cables and instruments to rule out faulty equipment.
• Undesired Noise/Buzz:
  • Ensure you are using a regulated 9V DC (center negative) power supply. Unregulated or incorrect power supplies can introduce noise.
  • Check for ground loops by trying different power outlets or isolating the power supply.
  • Reduce gain settings if the noise is excessive distortion.
  • Ziurtatu kable guztiak babestuta daudela eta egoera onean daudela.
• Oin-etengailuak ez du erantzuten:
  • Ziurtatu unitatea piztuta dagoela.
  • If the footswitch mode is set to Channel A/B, it will not bypass the effect.

Zehaztapenak

Bermea eta Laguntza

Bermeari buruzko informazioa eta laguntza teknikoa lortzeko, jo ezazu MOOER ofizialera. webwebgunearekin edo jarri harremanetan zure MOOER saltzaile baimenduarekin. Gorde erosketa-agiria erosketaren frogagiri gisa berme-erreklamazioetarako.

MOOER Ofiziala Webgunea: www.mooeraudio.com