1. Sarrera
This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of the VWR North America 89202-918 Circulating Open Bath Temperature Controller. Please read this manual thoroughly before using the device to ensure proper function and to prevent potential hazards.
2. Segurtasun informazioa
Beti beti segurtasun-neurri hauek:
- Ziurtatu unitatea behar bezala lurrera konektatutako entxufe batera konektatuta dagoela.
- Do not operate the unit with damaged power cords or if it has been dropped or damaged.
- Deskonektatu beti energia mantentze-lan edo garbiketa egin aurretik.
- Use only approved fluids in the open bath. Refer to your bath's specifications for compatible media.
- Avoid direct contact with heated surfaces or fluids, as they can cause severe burns.
- Operate the controller in a well-ventilated area.
- This device is intended for laboratory use by trained personnel only.
3. Produktua amaitu daview
The VWR 89202-918 is a precision temperature controller designed for use with open baths, providing accurate and stable temperature regulation for various laboratory applications. It features an intuitive control panel and a robust heating and circulation system.
1. irudia: Aurrealdea view of the VWR 89202-918 Circulating Open Bath Temperature Controller. This image displays the main control unit with its digital display and control buttons, along with the power cord extending from the base.
2. irudia: Azpialdea view of the VWR 89202-918 showing the heating coil and circulation components. This image highlights the internal heating element and the pump mechanism responsible for fluid circulation within the bath.
3. irudia: Product label detailing the VWR North American Cat. No. 89202-918, model MX20S135-V11B, serial number, and electrical specifications (60 Hz/A/V, 120V). This label provides critical identification and power requirements for the device.
3.1. Osagaiak
- Kontrol burua: Digital display and user interface buttons.
- Immersion Heater: Provides precise temperature control.
- Zirkulazio-ponpa: Ensures uniform temperature distribution within the bath.
- Cl muntatzeaamp: Secures the controller to the bath vessel.
- Elikatze kablea: Konexio elektrikorako.
4. Konfigurazioa
- Despaketatzea: Carefully remove the controller from its packaging. Inspect for any visible damage.
- Muntaketa: Securely attach the controller to the side of your open bath using the integrated mounting clamp. Ensure the heating element and pump are fully submerged in the bath fluid, but the control head remains above the fluid level.
- Fluido maila: Fill the open bath with the appropriate heat transfer fluid to a level that covers the heating element and pump, but is below the minimum fill line indicated on the controller (if applicable) and well below the control head.
- Potentzia-konexioa: Connect the power cord to a grounded electrical outlet matching the voltage specifications on the product label (120V, 60Hz).
5. Funtzionamendu-argibideak
5.1. Piztu/Itzali
- To power on, ensure the unit is properly connected and press the BOTEREA button (location may vary, typically on the control head). The display will illuminate.
- Itzaltzeko, luze sakatu BOTEREA botoia pantaila itzali arte.
5.2. Tenperatura ezartzea
- With the unit powered on, the display typically shows the current bath temperature.
- Sakatu EZARTU button (or equivalent) to enter temperature setting mode. The setpoint temperature will flash.
- Erabili UP eta BEHERA arrow buttons to adjust the desired temperature setpoint.
- Sakatu EZARTU again to confirm the new setpoint. The unit will begin heating or cooling to reach the target temperature.
5.3. Circulation Control
The circulation pump typically operates continuously when the unit is powered on to ensure uniform temperature. Refer to the specific model's advanced settings for pump speed adjustments if available.
6. Mantentzea
- Garbiketa: Disconnect power before cleaning. Wipe the exterior of the control head with a damp cloth. For the immersed parts, periodically remove the unit from the bath and clean any residue from the heating element and pump impeller. Use mild detergents if necessary, and rinse thoroughly with distilled water.
- Fluidoen ordezkapena: Regularly inspect the bath fluid for contamination or degradation. Replace the fluid as recommended by the fluid manufacturer or as needed to maintain optimal performance.
- Biltegiratzea: When not in use for extended periods, clean the unit, drain all fluids, and store in a dry, dust-free environment.
7. Arazoak
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Unitatea ez da pizten. | No power supply; damaged power cord; internal fuse. | Check power connection and outlet. Inspect power cord. Contact service if fuse replacement is suspected. |
| Temperature not stable or incorrect. | Insufficient fluid level; contaminated fluid; sensor issue; external drafts. | Ensure proper fluid level. Replace fluid if contaminated. Minimize external temperature fluctuations. Contact service if sensor is faulty. |
| Circulation pump not working. | Blocked impeller; motor failure. | Disconnect power and inspect impeller for obstructions. Contact service if motor failure is suspected. |
| Errore kodea bistaratu da. | Sistemaren akats espezifikoa. | Note the error code and refer to the full service manual or contact VWR technical support for specific guidance. |
8. Zehaztapenak
- Eredua: VWR 89202-918
- Fabrikatzailea: VWR North America
- Produktuaren neurriak: 20.08 x 14.17 x 14.17 hazbete (51.0 x 36.0 x 36.0 cm)
- Elementuaren pisua: 13.23 libra (6 kilogramo)
- Baldintza elektrikoak: 120V, 60Hz (as per product label)
- ASIN: B06XD2TD4V
9. Bermea eta Laguntza
For warranty information, technical support, or service inquiries, please contact VWR North America directly or refer to the official VWR website. Keep your purchase receipt and product serial number (found on the product label, see Figure 3) readily available when contacting support.
VWR North America Contact: us.vwr.com/store/
