Sarrera
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your SANUS OLL15-B1 Low Profile TV Wall Mount. Please read all instructions carefully before beginning installation to ensure a secure and successful setup. This mount is designed to securely hold 40" to 80" flat-panel televisions weighing up to 130 lbs (59 kg).
Segurtasun Informazioa
- Pisu-gaitasuna: Ez gainditu 130 lb-ko (59 kg) gehienezko pisu-ahalmena. Muga hori gainditzeak lesio larriak edo ondasunen kalteak eragin ditzake.
- Telebistaren tamaina: This mount is designed for TVs between 40" and 80". Ensure your TV falls within this range.
- Horma mota: This mount is intended for installation into wood studs or solid concrete/masonry walls. Do not install into drywall alone.
- Instalazio profesionala: If you are unsure about the installation process or the suitability of your wall, consult a qualified professional installer.
- Tresnak: Use appropriate tools and wear safety gear, including eye protection, during installation.
- Haurrak: Mantendu haurrak instalazio-eremutik urrun muntaketa-fasean zehar.
Paketearen edukia
Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, contact SANUS customer support.
Image: The complete package contents, including the wall mount, TV brackets, pre-sorted hardware, drilling template, and easy-to-follow manual.
- Hormako plakaren muntaketa
- Telebistako euskarriak (2)
- Zulatzeko txantiloia
- Pre-sorted Hardware Kit (various screws, washers, spacers for TV and wall)
- Argibide eskuliburua
Konfigurazioa eta Instalazioa
The SANUS OLL15-B1 mount is designed for a straightforward 3-step installation process. Ensure you have the necessary tools (e.g., drill, stud finder, level, Phillips screwdriver) before starting.
Image: Visual representation of the three main installation steps: attaching brackets to the TV, securing the wall plate, and mounting the TV.
- 1. urratsa: Telebista euskarriak lotu
Carefully place your TV face down on a soft, clean surface. Identify the VESA mounting holes on the back of your TV. Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV. Attach the two vertical TV brackets to the back of your TV, ensuring they are securely fastened and level. The quick-release straps should hang freely below the TV.
- Step 2: Secure Wall Plate
Locate the desired mounting position on your wall. Use a stud finder to identify and mark the center of two adjacent wood studs (the mount accommodates 16" and 24" stud spacing). Alternatively, for concrete/masonry walls, mark your drill points. Use the provided drilling template to accurately mark pilot holes. Drill the pilot holes and securely fasten the wall plate to the wall using the appropriate lag bolts and washers. Ensure the wall plate is perfectly level.
Image: The wall plate allows for post-installation leveling and centering, and is compatible with 16-inch and 24-inch on-center studs.
The open design of the wall plate provides ample space for in-wall cable routing, allowing for a clean and organized setup. Consider pairing with a SANUS In-Wall Cable Management solution for optimal results.
Image: The open wall plate design facilitates easy cable management behind the mounted television.
- Step 3: Attach TV
With assistance, carefully lift the TV and hook the top of the TV brackets onto the top edge of the wall plate. Gently push the bottom of the TV towards the wall until the quick-release straps click into place, securing the TV to the mount. Ensure both sides are securely engaged.
Funtzionamendua
Once installed, the SANUS OLL15-B1 is a fixed position mount, meaning the TV will remain in a static position close to the wall. Its ultra-low profile design positions the TV just 1 inch from the wall for a sleek, modern aesthetic.
Image: The mount's razor-thin 1-inch profile ensures the TV sits very close to the wall, offering a space-saving design.
To remove the TV from the mount for cable access or relocation, simply pull down on the quick-release straps located at the bottom of the TV brackets. This will disengage the locking mechanism, allowing you to lift the TV off the wall plate.
Image: The quick-release straps provide a simple and tool-free method for removing the TV from the mount.
Mantentzea
- Garbiketa: Dust the mount periodically with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Aldizkako egiaztapenak: Annually, or if you notice any changes, inspect all screws and bolts to ensure they remain tight. Do not overtighten.
- Kalteak: If any part of the mount appears damaged or worn, discontinue use and contact SANUS customer support for assistance.
Arazoak konpontzea
- TV is not level after installation:
- The TV brackets have adjustment screws that allow for minor leveling adjustments after the TV is mounted. Use a level and adjust as needed.
- TV does not click into place:
- Ensure the TV brackets are properly seated on the wall plate. Check for any obstructions. Verify that the quick-release straps are not caught or preventing engagement. Re-attempt seating the TV by gently pushing the bottom towards the wall until you hear a click.
- Difficulty pulling quick-release straps:
- Ensure the straps are fully accessible and not pinched behind the TV. Pull firmly but smoothly. If still stuck, gently push the bottom of the TV towards the wall while pulling the strap to relieve tension.
- Mendia ezegonkorra sentitzen da:
- Immediately remove the TV. Re-check all wall plate fasteners to ensure they are securely tightened into the wood studs or concrete. Verify that the wall type is suitable for this mount. If unsure, consult a professional.
Zehaztapenak
| Marka | Sanus |
| Modelo zenbakia | OLL15-B1 |
| Muntatze Mota | Hormako Muntaia |
| Mugimendu Mota | Finkoa |
| Telebistako tamaina bateragarriak | 40" eta 80" artean |
| Gehienezko pisu-gaitasuna | 130 lb (59 kg) |
| Profile from Wall | 1 hazbetekoa |
| Materiala | Altzairu aleazioa |
| Kolorea | Beltza |
| UL Ziurtagiria | Bai |
This mount offers universal compatibility with most major TV brands, including Samsung, LG, Vizio, TCL, Hisense, Sharp, Sony, and Roku.
Image: The mount's universal design ensures compatibility with a wide range of TV brands.
Bermea eta Laguntza
SANUS products are designed and engineered in the U.S. and come with a limited warranty. For specific warranty details, please refer to the documentation included with your product or visit the official SANUS webgunea.
For any questions regarding installation, troubleshooting, or product information, SANUS offers U.S.-based expert customer care 7 days a week.
Contact SANUS Support:
- Bisitatu SANUS Store on Amazon
- Ikusi zure produktuaren ontzian emandako harremanetarako informazioa.
