1. Produktua amaitu daview
The Valore 7 shower panel is designed for retrofit installation into existing shower systems that include a cold and hot faucet. It connects to an existing shower head spout. The panel body is constructed from durable 304 stainless steel, offering a modern aesthetic for bathroom upgrades.
This shower panel features a 3-way shower spray mode system, allowing for versatile water delivery options. It includes a brass shower wand with a brass shower cradle for handheld use.

Image 1.1: Valore 7 Shower Panel installed in a modern bathroom setting.
2. Segurtasun informazioa
- Ziurtatu ur-hornidura hodi guztiak itxita daudela instalazioa hasi aurretik.
- Instalazioan zehar, erabili babes pertsonaleko ekipamendu egokia, hala nola segurtasun-betaurrekoak eta eskularruak.
- Instalazio prozesuaren edozein atalen inguruan ziur ez bazaude, kontsultatu iturgin kualifikatu bati.
- Do not use abrasive cleaners or harsh chemicals on the shower panel's surface, as this may damage the finish.
3. Paketearen edukia
Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela:
- Dutxako panel unitatea
- Dutxa Burua
- Shower Wand (Handheld Shower)
- Shower Cradle for Handheld Shower
- Muntatzeko Hardwarea
- Flexible Hoses for Water Connection
- Instalazio eskuliburua
4. Zehaztapenak
| Ezaugarri | Zehaztapena |
|---|---|
| Marka | Balio |
| Modelo zenbakia | 32c8f765-6d09-4293-9210-40320453c0bb |
| Kolorea | Eskuilatutako altzairu herdoilgaitza |
| Materiala | Letoia, altzairu herdoilgaitza |
| Akabera mota | Eskuilatua |
| Helduleku kopurua | 3 |
| Muntatze Mota | Hormako Muntaia |
| Elementuaren pisua | 14.02 kilo |
| Ziurtagiriak | UPC/c-UPC certified |
5. Neurriak
Refer to the diagram below for detailed product dimensions.

Image 5.1: Valore 7 Shower Panel Dimensions Diagram. All measurements are approximate.
6. Instalatzeko jarraibideak
The Valore 7 shower panel is designed for easy retrofit installation. It connects to your existing shower head spout and hot/cold water lines.
6.1 Aurreinstalazioa
- Itzali uraren hornidura: Locate and turn off the main water supply to your bathroom or entire home.
- Remove Existing Fixtures: Carefully remove your current shower head and any other fixtures that will be replaced by the shower panel.
- Iturgintza ikuskatu: Ensure your existing hot and cold water lines are accessible and in good condition. This panel is designed for systems with existing hot and cold faucets.
- Water-Saving Regulator: If your water pressure is naturally low, consider not installing any water-saving regulator that may be included with the panel, as it can further reduce flow. If you use the hang-on to the shower pipe method, access to the regulator may be limited after installation.
6.2 Panela muntatzea
- Kokalekua: Hold the shower panel against the wall in the desired position. Mark the locations for mounting brackets. Ensure the panel is level.
- Zulatzeko zuloak: Zulatu pilotu-zuloak markatutako tokietan. Beharrezkoa bada, sartu hormako aingurak.
- Parentesi seguruak: Lotu muntatzeko euskarriak horman emandako torlojuak erabiliz.
- Panelaren eranskina: The unit may include double-sided tape for securing it to the wall. Once applied, repositioning is difficult without replacing the tape. Carefully align and press the panel onto the brackets and tape.
6.3 Connecting Water Lines
- Konektatu hodiak: Attach the flexible hot and cold water supply hoses from the shower panel to your existing hot and cold water outlets. Ensure all connections are tight to prevent leaks.
- Eskuko dutxa: Connect the handheld shower hose to its designated outlet on the panel.
- Ura piztu: Slowly turn the main water supply back on and check for any leaks. Tighten connections as needed.
- Seal Edges (Optional but Recommended): Apply a bead of clear silicone caulk along the sides of the shower panel where it meets the tile to create a seal and prevent water intrusion.
Note: This shower panel does not include a temperature/volume control valve. Your existing shower valve will control water temperature and flow.
7. Funtzionamendu-argibideak
The Valore 7 shower panel features a 3-way diverter to control water flow to different functions.
7.1 Ur-fluxuaren kontrola
Use your existing shower's hot and cold water handles to adjust the desired water temperature and overall flow rate.
7.2 Selecting Spray Modes
The panel has a control knob or lever to switch between the three spray modes:
- Euria: Provides a wide, gentle rainfall-like spray from the overhead shower head.
- Gorputz-zorrotadak: Delivers targeted streams of water from the integrated body massage jets.
- Eskuko dutxa: Directs water flow to the brass shower wand for focused rinsing or cleaning.

Image 7.1: Valore 7 Shower Panel demonstrating the rain shower function.

Image 7.2: Valore 7 Shower Panel demonstrating the body jet function.
Rotate or move the diverter control to select your desired spray function. Only one function can be active at a time.
8. Mantentzea
8.1 Garbiketa
- Clean the stainless steel surface regularly with a soft cloth and mild soap or a non-abrasive stainless steel cleaner.
- Avoid using abrasive sponges, scouring pads, or harsh chemical cleaners, as these can scratch or damage the finish.
- For hard water spots, use a solution of white vinegar and water, then rinse thoroughly.
- Periodically clean the nozzles of the shower head and body jets to remove mineral buildup. You can often do this by gently rubbing the rubber nozzles.
8.2 Arreta orokorra
- Ensure all connections remain tight to prevent leaks.
- If any part becomes loose, gently tighten it. Do not overtighten.
9. Arazoak
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Ur Presio baxua | Water-saving regulator installed; mineral buildup in nozzles; low household water pressure. | Check if a water-saving regulator is installed and consider removing it if pressure is consistently low. Clean shower head and body jet nozzles. Consult a plumber if household pressure is generally low. |
| Konexioetako ihesak | Konexio solteak; arandelak/juntura higatuak. | Ensure all hose connections are securely tightened. Check and replace any damaged washers or gaskets. |
| Desbideratzaileak ez ditu funtzioak aldatzen | Mineralen metaketa; barne-mekanismoaren arazoa. | Flush the system by running water through all functions. If the issue persists, contact customer support. |
10. Bermea eta Laguntza
For warranty information or technical support, please refer to the documentation provided with your purchase or contact Valore customer service. Keep your proof of purchase for warranty claims.





