Legrand 191510 Plexo Recessed Switch User Manual

1. Sarrera

This manual provides essential information for the safe and correct installation, operation, and maintenance of the Legrand 191510 Plexo Recessed Switch. Please read these instructions thoroughly before beginning any work.

1.1 Segurtasun informazioa

• Instalazioa elektrizista kualifikatu batek egin behar du, tokiko eta estatuko arau elektriko guztien arabera.
• Always disconnect power at the main circuit breaker before installing or servicing the switch.
• Do not use the switch if it appears damaged.
• Ziurtatu lurreratze egokia behar den lekuan.
• The switch is designed for recessed installation and offers waterproof protection (IP54).

1.2 Produktua gainditzeaview

The Legrand 191510 Plexo Recessed Switch is a grey, waterproof switch designed for environments requiring protection against dust and water, such as outdoor areas, basements, and garages. It features a robust design for recessed installation and includes a box with upper and lower membranes for pipe inlet up to 25 mm, facilitating a secure and sealed cable entry.

1. irudia: Aurrealdea view of the Legrand 191510 Plexo Recessed Switch.

2. Instalatzeko jarraibideak

2.1 Beharrezko tresnak

• Bihurkin (Phillips eta laua)
• Wire strippers
• liburukiatage probatzailea
• Drill (if creating a new recess)
• Neurtzeko zinta

2.2 Mounting the Switch Box

1. Ziurtatu zirkuitu-hausle nagusian korrontea deskonektatuta dagoela.
2. Prepare the recess in the wall according to the switch dimensions (approximately 8 x 8 x 5.5 cm).
3. Identify the desired cable entry point(s) on the switch box (upper or lower membrane). Carefully pierce the membrane to allow cable passage.
4. Insert the electrical cables through the prepared membrane(s).
5. Secure the switch box into the recess using appropriate fasteners. The joint joints between the mechanism and the wall facilitate adjustment on various surfaces.

2. Irudia: Atzealdea view of the switch box with cable entry membranes and mounting points.

2.3 Wiring the Switch

1. Strip approximately 13mm of insulation from the ends of the electrical wires.
2. Connect the wires to the appropriate terminals on the switch mechanism. Refer to the wiring diagram usually found on the product or packaging. For a 1-way circuit, connect the live input to one terminal and the switched live output to the other.
3. Ziurtatu konexio guztiak estu eta seguru daudela.

3. irudia: Xehetasuna view of the wiring terminals.

2.4 Assembling the Switch Mechanism and Cover

1. Carefully position the wired switch mechanism into the mounted switch box.
2. Ensure the mechanism is seated correctly and securely within the box.

Figure 4: Internal mechanism of the switch.

3. Attach the grey front plate to the switch mechanism, ensuring it clicks into place and forms a tight seal for waterproof protection.

Figure 5: Attaching the front plate to the switch mechanism.

4. Once fully assembled, restore power at the main circuit breaker.

3. Funtzionamendua

3.1 Oinarrizko funtzionalitatea

The Legrand 191510 Plexo Recessed Switch operates as an ON-ON-OFF push-button switch. Pressing the button will toggle the connected electrical circuit between its ON and OFF states. The switch has 3 positions, allowing for flexible control of the connected load.

4. Mantentzea

4.1 Garbiketa

To clean the switch, wipe the surface with a soft, damp cloth. Do not use abrasive cleaners, solvents, or excessive water, as this may damage the finish or compromise the waterproof seal.

4.2 Ikuskapena

Periodically inspect the switch for any signs of damage, wear, or compromise to the waterproof seal. If any damage is observed, disconnect power and have the switch inspected or replaced by a qualified professional.

5. Arazoak

5.1 Gai arruntak

• Etengailuak ez du erantzuten: Check if the main circuit breaker is ON. Verify all wiring connections are secure. If the issue persists, consult a qualified electrician.
• Etengabeko funtzionamendua: This could indicate a loose connection or internal damage. Disconnect power and have the switch inspected by a professional.
• Uraren sarrera: If water is observed inside the switch or connected enclosure, immediately disconnect power. The waterproof seal may be compromised. The switch must be replaced.

6. Zehaztapen Teknikoak

7. Bermearen informazioa

The Legrand 191510 Plexo Recessed Switch is covered by a standard manufacturer's warranty. For specific details regarding warranty terms, duration, and claims, please refer to the documentation provided with your purchase or visit the official Legrand webgunea. Gorde erosketaren egiaztagiria bermearen ondorioetarako.

8. Bezeroarentzako arreta

For further assistance, technical support, or inquiries regarding the Legrand 191510 Plexo Recessed Switch, please contact Legrand customer service. You can find contact information, FAQs, and additional resources on the official Legrand webgunea:

www.legrand.us