Stihl MS 201 TC-M Chainsaw Instruction Manual

1. Segurtasun informazioa

Operating a chainsaw can be dangerous if proper safety precautions are not followed. Always read and understand the entire instruction manual before operating the Stihl MS 201 TC-M chainsaw. Failure to follow safety instructions can result in serious injury or death.

Norberaren Babeserako Ekipamendua (PPE)

• Buruaren babesa: Wear a safety helmet with face and hearing protection.
• Begietako babesa: Erabili beti segurtasun-betaurrekoak edo betaurrekoak.
• Eskuen babesa: Erabili lanerako eskularru sendoak.
• Hanka babestea: Jantzi motozerraren aurkako babes-prakak edo txankletak.
• Oinen babesa: Wear safety boots with steel toes and non-slip soles.

Fuel Handling Safety

• Always mix and handle fuel in a well-ventilated area, away from ignition sources.
• Erabili onartutako erregai-ontziak soilik.
• Ez erre erre-hornidura bitartean.
• Garbitu isuritako erregaia berehala.

2. Produktua amaitu daview

The Stihl MS 201 TC-M is a powerful and compact gasoline-powered chainsaw designed for professional tree care and pruning. It features a 35 cm cutting length and is equipped with advanced engine technology for efficient operation.

2.1. irudia: Goiko aldea view of the Stihl MS 201 TC-M chainsaw, highlighting the ergonomic handle and engine housing.

2.2. irudia: Aldea view of the Stihl MS 201 TC-M chainsaw, showing the Stihl branding and engine components.

3. Konfigurazioa

Despaketatzea eta Muntatzea

1. Kontu handiz kendu osagai guztiak ontzitik.
2. Inspect for any shipping damage. If damaged, do not use and contact your dealer.
3. Ziurtatu ontziratze-zerrendan zerrendatutako pieza guztiak daudela.

Bar and Chain Installation

Proper installation of the guide bar and saw chain is crucial for safe and efficient operation.

1. Ziurtatu kate-balazta deskonektatuta dagoela.
2. Remove the chain sprocket cover by loosening the nuts.
3. Place the guide bar onto the studs.
4. Fit the saw chain around the sprocket and into the guide bar groove. Ensure the cutting edges face forward on the top of the bar.
5. Replace the chain sprocket cover and hand-tighten the nuts. Do not fully tighten yet.
6. Adjust chain tension (refer to 'Chain Tension Adjustment' in Section 5).
7. Fully tighten the chain sprocket cover nuts.

3.1. irudia: hurbileko planoa view of the chainsaw's chain and guide bar, illustrating proper assembly.

Fuel and Chain Oil Filling

The MS 201 TC-M operates on a gasoline-oil mixture and requires chain lubricant.

• Erregaia: Use a high-quality unleaded gasoline mixed with Stihl 2-stroke engine oil at the recommended ratio (typically 50:1). Refer to the fuel tank cap for specific ratios.
• Kate-olioa: Fill the chain oil tank with high-quality bar and chain lubricant. Do not use waste oil.

Ensure both caps are securely tightened after filling.

4. Funtzionamendu-argibideak

Motozerra martxan jartzea

1. Place the chainsaw on a firm, level surface.
2. Kate-balazta aktibatu aurreko esku-babeslea aurrerantz bultzatuz.
3. Set the master control lever to the cold start position (choke).
4. Hold the chainsaw firmly with one hand on the front handle and place your foot on the rear handle.
5. Pull the starter cord slowly until resistance is felt, then pull briskly until the engine fires briefly.
6. Move the master control lever to the half-throttle position.
7. Tira berriro abiarazle-kordoia motorra martxan jarri arte.
8. Blip the throttle to disengage the half-throttle and return to idle.
9. Ebaketa-eragiketak hasi aurretik, desaktibatu kate-balazta.

Stopping the Chainsaw

To stop the engine, move the master control lever to the STOP position.

Katearen balazta funtzionamendua

The chain brake is a critical safety feature. It can be engaged manually by pushing the front hand guard forward or automatically by inertia during kickback. Always ensure the chain brake is functional before each use.

5. Mantentzea

Regular maintenance ensures the longevity and safe operation of your Stihl MS 201 TC-M chainsaw.

Katearen Tentsioaren Doikuntza

Correct chain tension is vital. A loose chain can derail, and an overly tight chain can cause premature wear to the bar and chain, and reduce engine power.

1. Loosen the nuts on the chain sprocket cover.
2. Using the tensioning screw, adjust the chain until it fits snugly against the underside of the guide bar, but can still be pulled around by hand.
3. Lift the tip of the guide bar slightly while tightening the nuts on the chain sprocket cover.
4. Check tension again.

Katea Zorroztea

A sharp chain is essential for efficient and safe cutting. Sharpen the chain regularly or have it professionally sharpened.

Aire iragazkien garbiketa

Clean the air filter regularly to maintain engine performance and prevent damage. Remove the filter cover and clean the filter element with warm soapy water or compressed air. Replace if damaged.

Bujiaren ikuskapena

Inspect the spark plug for wear and proper gap. Replace if electrodes are worn or fouled. Refer to the specifications for the correct spark plug type and gap.

Gida Taberna Mantentzea

Regularly clean the guide bar groove and oil holes. Flip the guide bar periodically to ensure even wear.

6. Arazoak

This section addresses common issues you might encounter with your Stihl MS 201 TC-M chainsaw.

7. Zehaztapenak

Key technical specifications for the Stihl MS 201 TC-M chainsaw:

• Modelo zenbakia: MS 201
• Energia iturria: Gasolina
• Ebaketa-luzera: 35 cm
• Elementuaren pisua: 3.85 kg (8.49 lb)
• Produktuaren neurriak: 37 x 10 x 37 cm (14.57 x 3.94 x 14.57 hazbete)
• Materiala: Plastikoa (etxebizitza)
• Fabrikatzailea: STIHL
• GTIN (UPC): 00795711953546

8. Bermea eta Laguntza

For warranty information, please refer to the warranty card included with your product or contact your authorized Stihl dealer. Keep your proof of purchase for warranty claims.

For technical support, spare parts, or service, please contact your local authorized Stihl service center. Only use genuine Stihl replacement parts and accessories.