Audibax Missouri 2000 A Dual VHF Wireless Microphone System

1. Sarrera

Thank you for choosing the Audibax Missouri 2000 A Dual VHF Wireless Microphone System. This professional wireless microphone system is designed to deliver clear, interference-free audio for various applications. This manual provides essential information for the safe and efficient use of your new system. Please read it thoroughly before operation and retain it for future reference.

2. Segurtasun informazioa

• Energia iturria: Ensure the receiver is connected to a 230V power supply. Use only the provided power adapter.
• Bateriaren erabilera: Microphones operate on AA batteries. Replace batteries when the low battery indicator appears to ensure optimal performance. Do not mix old and new batteries, or different types of batteries.
• Ingurumena: Avoid exposing the system to water, moisture, extreme temperatures, or direct sunlight. Operate in a well-ventilated area.
• Manipulazioa: Handle microphones and receiver with care. Avoid dropping or subjecting them to strong impacts.
• Zerbitzua: Ez saiatu unitatea zeuk irekitzen edo konpontzen. Mantendu konponketa guztiak langile kualifikatuen esku.

3. Paketearen edukia

Mesedez, egiaztatu behean zerrendatutako elementu guztiak zure paketean sartuta daudela:

• 1x Audibax Missouri 2000 A Receiver Unit
• 2x Audibax Missouri 2000 A Handheld Wireless Microphones
• 1x Power Adapter for Receiver
• 1x Erabiltzailearen eskuliburua
• (AA Batteries for microphones are not included and must be purchased separately)

Figure 3.1: Complete Audibax Missouri 2000 A system including receiver and two microphones.

4. Produktua amaitu daview

The Audibax Missouri 2000 A is a dual VHF wireless microphone system designed for professional audio applications. It features two high-quality handheld wireless microphones and a receiver unit with independent volume controls and RF/AF indicators.

Ezaugarri nagusiak:

• Dual VHF wireless system with 2 handheld microphones.
• Receiver with Diversity antennas for improved signal reception and up to 80 meters coverage.
• Clean sound with a signal-to-noise ratio of 105 dB, minimizing interference.
• Hargailuko mikrofono bakoitzerako bolumen-kontrol independentea.
• RF/AF indicators on the receiver display for monitoring signal status.
• Microphone power via AA batteries, offering extended autonomy.
• Dynamic cardioid microphone capsule for focused sound capture and attenuation of off-axis sounds.
• Output connectors: XLR balanced and auxiliary (MIX) output.

Figure 4.1: Front panel of the receiver unit.

Figure 4.2: Two handheld wireless microphones.

5. Konfigurazioa

5.1 Hargailuaren konfigurazioa

1. Lekua: Position the receiver unit on a stable, flat surface, away from potential sources of interference (e.g., computers, Wi-Fi routers). Ensure adequate ventilation.
2. Antena konexioa: Screw the two included antennas firmly into the ANT A and ANT B connectors on the rear of the receiver. Adjust them vertically for optimal signal reception.
3. Potentzia-konexioa: Connect the provided power adapter to the DC IN port on the rear of the receiver and then plug it into a 230V AC power outlet.
4. Audio irteera:
   • For a mixed output of both microphones, connect an audio cable (e.g., 6.35mm jack) from the "OUT MIX" port on the receiver to the input of your mixer, amplifier, or sound system.
   • For individual balanced outputs, use XLR cables to connect the "BALANCED" XLR output ports (if available on your specific model) to your audio system.

Figure 5.1: Rear panel connections of the receiver unit.

5.2 Mikrofonoaren konfigurazioa

1. Bateriaren instalazioa: Unscrew the bottom part of each microphone to access the battery compartment. Insert two AA batteries, ensuring correct polarity (+/-). Screw the bottom part back on securely.
2. Piztu: Slide the ON/OFF switch on each microphone to the "ON" position. The microphone display should illuminate, showing the channel and frequency.
3. Mutu funtzioa: Each microphone has a MUTE switch. Use this to temporarily silence the microphone without turning it off completely.

6. Funtzionamendu-argibideak

6.1 Sistema piztea

1. Ensure all connections (power, audio output) are secure on the receiver.
2. Turn on your mixer or amplifier first, with its volume set to minimum.
3. Press the power button on the receiver unit. The display will light up.
4. Turn on each microphone by sliding its ON/OFF switch to "ON".
5. Observe the receiver's display. The "RF" (Radio Frequency) indicator for each channel should light up, indicating a successful connection between the microphone and receiver. The "AF" (Audio Frequency) indicator will light up when sound is detected by the microphone.

Figure 6.1: Receiver display with RF/AF indicators and frequency information.

6.2 Bolumen kontrola

• The receiver has independent volume knobs for Microphone A (VOLUME A) and Microphone B (VOLUME B). Adjust these to set the desired output level for each microphone.
• Gradually increase the volume on your mixer or amplifijatzailea nahi den entzute-mailara.

6.3 Maiztasunari buruzko informazioa

The Audibax Missouri 2000 A operates on fixed VHF frequencies. For this specific model, the frequencies are 179.300 MHz and 188.100 MHz. These frequencies are displayed on both the receiver and microphone units.

7. Mantentzea

7.1 Garbiketa

• Always disconnect the receiver from the power outlet before cleaning.
• Use a soft, dry cloth to wipe the surfaces of the receiver and microphones.
• Ez erabili garbitzaile likidorik, aerosolik edo disolbatzailerik, hauek akabera edo barneko osagaiak kaltetu baitezakete.

7.2 Bateria ordezkatzea

• When the microphone's display indicates low battery, replace both AA batteries immediately to avoid interruption during use.
• Ziurtatu polaritate zuzena bateria berriak sartzerakoan.
• Bota ezazu erabilitako bateriak arduraz tokiko araudiaren arabera.

7.3 Biltegiratzea

• Denbora luzez erabiltzen ez baduzu, kendu bateriak mikrofonoetatik isuriak saihesteko.
• Gorde sistema leku fresko eta lehor batean, eguzki-argitik eta muturreko tenperaturetatik babestuta.

8. Arazoak

9. Zehaztapenak

10. Bermea eta Laguntza

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Audibax customer service directly. Keep your proof of purchase for any warranty claims.