Emomo Atsedenlekuko Edalontzien Euskarri HX43HRL-1 Erabiltzailearen Eskuliburua

Sarrera

This manual provides detailed instructions for the installation, operation, and maintenance of your Emomo Recliner Cup Holder, Model HX43HRL-1. This cup holder is designed to integrate into recliners and sofas, offering convenient beverage storage with integrated blue LED lighting and touch sensor controls for your recliner's lift mechanism.

Segurtasun Informazioa

• Ensure all power connections are secure and correctly installed to prevent electrical hazards.
• Do not expose the cup holder to excessive moisture or liquids beyond its intended use.
• Keep children away from the wiring and connectors during installation.
• If any damage is observed, discontinue use and contact customer support.

Paketearen edukia

• Emomo Recliner Cup Holder (Model HX43HRL-1)
• Integrated 8-pin connector cable

Note: A control box (Part # JCTBOX014) may be required for dual cup systems or specific recliner models. This item is sold separately.

Produktua amaituview

The Emomo Recliner Cup Holder features an integrated design with touch-sensitive controls and LED illumination. Familiarize yourself with the components:

1. irudia: Goikoa View of Cup Holder Controls

This image displays the top surface of the Emomo Recliner Cup Holder. The cup holder features a circular design with a blue LED light illuminating the interior rim. Around the rim, there are four touch-sensitive icons: a power symbol (lockout), a light bulb symbol (LIGHT), an upward-pointing hand symbol (OPEN), and a downward-pointing hand symbol (CLOSE). These icons indicate the touch sensor controls for the cup holder's functions and the recliner's lift mechanism.

2. irudia: Aldea View with Connector Cable

Irudi honek albo bat erakusten du view of the Emomo Recliner Cup Holder. The main body of the cup holder is black plastic. Extending from the bottom is a black electrical cable, neatly coiled, terminating in a round, 8-pin male connector. This connector is used to interface with the recliner's power system or a control box.

• LED argiztapena: Blue LED illuminates the inside of the cup holder.
• Ukipen-sentsoreen kontrolak:
  • ARGIA: Activates/deactivates the blue LED light.
  • OPEN: Initiates the recliner's lift mechanism to open/recline.
  • ITXI: Initiates the recliner's lift mechanism to close/return to upright position.
• Blokeo funtzioa: A dedicated button to disable the touch sensors, preventing accidental activation.
• 8 pin konektorea: Standard round connector for power and control signals.

Konfigurazioa eta Instalazioa

1. Potentzia deskonexioa: Before beginning installation, ensure the recliner or sofa is unplugged from its power source to prevent electrical shock.
2. Instalazio puntua kokatu: Identify the designated opening in your recliner or sofa for the cup holder.
3. Insert Cup Holder: Carefully insert the Emomo Recliner Cup Holder into the opening. Ensure it sits flush with the surface.
4. Konektatu kableatzea:
   • Locate the existing wiring harness or control box in your recliner.
   • Connect the 8-pin connector from the cup holder to the corresponding 8-pin port on your recliner's motor or control box (e.g., JCTBOX014). Ensure the connection is firm and secure.
   • For dual cup systems, ensure both cup holders are correctly connected to the control box, which then connects to the recliner's motor.
5. Kableatu segurua: Route and secure any loose wiring to prevent interference with moving parts of the recliner.
6. Energia berriro konektatzea: Once all connections are secure, plug the recliner back into its power source.
7. Proba funtzionaltasuna: Test all functions of the cup holder and recliner lift mechanism as described in the "Operating Instructions" section.

Funtzionamendu-argibideak

The Emomo Recliner Cup Holder features intuitive touch controls:

1. Activating/Deactivating LED Light:
   • Ukitu astiro-astiro ARGIA icon (light bulb symbol) on the cup holder.
   • The blue LED light inside the cup holder will turn on or off with each touch.
2. Operating Recliner Lift Mechanism:
   • To recline or open the chair, gently touch and hold the IREKI icon (upward-pointing hand symbol). Release when the desired position is reached.
   • To close or return the chair to an upright position, gently touch and hold the ITXI icon (downward-pointing hand symbol). Release when the desired position is reached.
3. Using the Lockout Function:
   • To prevent accidental activation of the touch sensors, touch the Blokeoa icon (power symbol).
   • When activated, the other touch sensors (LIGHT, OPEN, CLOSE) will be temporarily disabled.
   • Ukitu Blokeoa icon again to re-enable the touch sensors.

Mantentzea

• Garbiketa: Erabili biguna, damp cloth to wipe the surface of the cup holder. Avoid abrasive cleaners or solvents that could damage the finish or electronic components.
• Isuri likidoak: In case of a liquid spill, immediately disconnect power to the recliner. Wipe up the spill and allow the unit to dry completely before reconnecting power.
• Ikuskapena: Aldian-aldian ikuskatu kableatuak eta konexioak higadura edo kalteen zantzurik dagoen ikusteko.

Arazoak konpontzea

Zehaztapenak

Bermearen informazioa

Emomo products are manufactured to high-quality standards. This product comes with a limited warranty against defects in materials and workmanship under normal use. The specific terms and duration of the warranty may vary. Please retain your proof of purchase for warranty claims.

For detailed warranty information, please contact Emomo customer support.

Bezeroarentzako Arreta

If you have any questions, require assistance with installation, or encounter issues not covered in this manual, please contact Emomo customer support for further assistance.

Please have your product model number (HX43HRL-1) and proof of purchase ready when contacting support.