Weiser SmartCode 10 Keyless Entry Deadbolt Lock User Manual

Sarrera

This manual provides comprehensive instructions for the installation, operation, programming, and maintenance of your Weiser SmartCode 10 Keyless Entry Deadbolt Lock. Please read this manual thoroughly before installation and use to ensure proper function and security.

1. irudia: Kanpokoa view of the Weiser SmartCode 10 Keyless Entry Deadbolt Lock in Polished Brass finish, showing the keypad and keyhole.

Paketearen edukia

Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela:

• Kanpoko teklatuaren muntaia
• Interior Assembly Unit
• Atxiloketa
• Greba Plaka
• Muntatzeko Plaka
• Egokitzaileen eraztuna
• 2 giltzak
• Torlojuak
• SmartKey tresna
• 4 AA bateria
• Instalazio Gida (eskuliburu hau)

Konfigurazioa eta Instalazioa

Instalatu aurretik, ziurtatu ateak honako zehaztapen hauek betetzen dituela:

• Door thickness: 1-3/8" to 2" (35mm - 51mm)
• Cross bore hole diameter: 2-1/8" (54mm)
• Atzerakada: 2-3/8" edo 2-3/4" (60 mm edo 70 mm)

Beharrezko tresnak:

• Phillips buru bihurkina
• Neurketa Zinta
• Arkatza

Instalazio urratsak:

1. Atea prestatu: If replacing an existing lock, remove it. Ensure the door frame is properly prepared for the strike plate.
2. Instalatu Latch: Insert the latch into the door edge. Ensure the "UP" arrow on the latch is facing upwards. Secure with screws.
3. Kanpoko muntaia instalatu: Route the cable from the exterior keypad assembly through the cross bore hole. Position the exterior assembly flush against the door.
4. Instalatu muntaketa plaka: Secure the mounting plate to the door using the provided screws, ensuring the cable passes through the plate.
5. Konektatu kableak: Konektatu kablea kanpo-multzotik barne-multzora.
6. Instalatu barruko muntaia: Attach the interior assembly to the mounting plate. Ensure the turn piece shaft engages correctly with the latch mechanism. Secure with screws.
7. Instalatu bateriak: Insert the 4 AA batteries into the battery pack of the interior assembly.
8. Atea irekitzeko prozesua egin: This step is crucial for the lock to learn the orientation of your door.
   • With the door open and unlocked, press the "Lock" button on the keypad.
   • The latch bolt should extend and retract. If it does not, repeat the process.

2. irudia: The Weiser SmartCode 10 deadbolt lock installed on a dark wooden door, showcasing its integration with existing door hardware.

Funtzionamendu-argibideak

Erabiltzaile-kodeak programatzea:

The lock supports up to 16 user codes and one master code. The master code is used to add or delete user codes and should be kept confidential.

1. Set Master Code (First Time Only):
   • Ireki bateriaren estalkia barneko muntaian.
   • Sakatu behin "Programa" botoia.
   • Enter a new 4-8 digit master code on the keypad.
   • Sakatu "Blokeatu" botoia.
   • Re-enter the master code.
   • Press the "Lock" button. A successful programming will be indicated by a green flash and a beep.
2. Gehitu erabiltzailearen kodea:
   • Ireki bateriaren estalkia.
   • Sakatu behin "Programa" botoia.
   • Idatzi kode nagusia.
   • Sakatu "Blokeatu" botoia.
   • Sartu 4-8 digituko erabiltzaile-kode berri bat.
   • Press the "Lock" button. A successful programming will be indicated by a green flash and a beep.
3. Ezabatu erabiltzailearen kodea:
   • Ireki bateriaren estalkia.
   • Press the "Program" button twice.
   • Idatzi kode nagusia.
   • Sakatu "Blokeatu" botoia.
   • Enter the user code to be deleted.
   • Press the "Lock" button. A successful deletion will be indicated by a green flash and a beep.

Atea ixtea:

• Kanpoaldetik: Sakatu teklatuko "Blokeatu" botoia. Segurtasun-sarraila luzatuko da.
• Barnealdetik: Rotate the turn piece to the vertical position.

Atea desblokeatzea:

• Teklatua erabiliz: Enter a valid user code or master code. The deadbolt will retract.
• Giltza erabiliz: Insert the key into the keyhole and turn.
• Barnealdetik: Rotate the turn piece to the horizontal position.

3. irudia: Barrualdea view of the Weiser SmartCode 10 deadbolt lock, showing the battery compartment and turn piece.

SmartKey Re-keying Instructions

The SmartKey feature allows you to re-key your lock to a new key in seconds. This is useful if you want to match your lock to an existing key or if you lose a key.

1. Sartu funtzionamendu-giltza guztiz zilindroan.
2. Biratu giltza 90 gradu erlojuaren orratzen noranzkoan.
3. Insert the SmartKey tool firmly into the SmartKey hole.
4. Kendu SmartKey tresna.
5. Kendu funtzionamendu-giltza.
6. Sartu giltza berria guztiz zilindroan.
7. Biratu giltza berria 90 gradu erlojuaren orratzen kontrako noranzkoan.
8. Rotate the new key 90 degrees clockwise again to ensure it functions correctly.

4. irudia: Diagram illustrating the SmartKey Security features, including resistance to kick-ins, bumps, picks, drills, and saws.

Mantentzea

• Bateria ordezkatzea: When the batteries are low, the lock will emit a series of beeps and the keypad will flash red after locking/unlocking. Replace all four AA batteries promptly.
• Garbiketa: Clean the keypad and exterior finish with a soft, damp cloth. Avoid abrasive cleaners or solvents, which can damage the finish.
• Lubrifikazioa: Periodically lubricate the latch bolt and deadbolt mechanism with a silicone-based lubricant to ensure smooth operation. Do not lubricate the key cylinder.

Arazoak konpontzea

Zehaztapenak

• Eredua: 9GED17000-001
• Amaiera: Letoi leundua
• Materiala: Letoia
• Atearen lodiera: 1-3/8" to 2" (35mm - 51mm)
• Gurutze-zuloa: 2-1/8" (54 mm)
• Aurrealdea: Adjustable 2-3/8" or 2-3/4" (60mm or 70mm)
• Erabiltzaile-kodeak: Gehienez 16 (4-8 digitu)
• Energia iturria: 4 AA bateria alkalino (barne)
• Ezaugarri bereziak: Keyless Entry, Backlit Keypad, One-Touch Locking, SmartKey Re-key Technology, Auto-Lock
• Produktuaren neurriak: 9.4 x 13.72 x 25.4 cm
• Elementuaren pisua: 1.69 kg

Bermea eta Laguntza

This Weiser SmartCode 10 Keyless Entry Deadbolt Lock comes with a Limited Lifetime Warranty. For detailed warranty information or technical support, please refer to the official Weiser webwebgunean edo jarri harremanetan bezeroarentzako zerbitzuarekin.

Fabrikatzailea: Weiser

Webgunea: www.weiserlock.com (Adibampesteka, benetako esteka alda daiteke)

Bezeroarentzako arreta: Refer to the Weiser webzure eskualdeko harremanetarako informazio espezifikoa lortzeko gunea.