1. Segurtasun informazio garrantzitsua
Always wear safety glasses and other protective gear when using. Keep bystanders at a safe distance to avoid injury from flying debris. Be cautious when starting and operating near people or pets to prevent cut hazards.
- Irakurri eta ulertu argibide guztiak tresna erabili aurretik.
- Ziurtatu bateria guztiz kargatuta dagoela erabili aurretik.
- Inspect the trimmer for any damage before each use.
- Keep hands and feet away from the cutting line.
- Ez erabili baldintza hezeetan.
2. Produktua amaitu daview
The Kobalt 40-Volt Max 13-inch Cordless String Trimmer is designed for efficient lawn and garden maintenance, particularly for half-acre lawns or less. It features a heavy-duty 0.080-inch dual line with a bump head for easy weed and grass cutting. The trimmer is powered by a 40-volt MAX Li-ion battery, offering up to 40 minutes of runtime with a fully charged 2.5Ah battery. Its variable speed trigger provides two settings for precise control, and it is compatible with other Kobalt 40V MAX products. This model also supports various attachments for increased versatility.
3. Konfigurazioa
- Despaketatzea: Kontu handiz atera osagai guztiak ontzitik. Ziurtatu ontziratze-zerrendan zerrendatutako pieza guztiak daudela.
- Bateriaren instalazioa: Insert the fully charged 40V MAX Li-ion battery into the battery compartment until it clicks securely into place. To remove, press the release button and slide the battery out.
- Adjusting the Auxiliary Handle: Loosen the knob on the auxiliary handle. Adjust the handle to a comfortable position that allows for balanced operation and firm grip. Tighten the knob securely.
- Installing the Guard: Attach the debris guard to the trimmer head using the provided fasteners. Ensure it is firmly secured to prevent debris from being thrown towards the operator.
4. Funtzionamendu-argibideak
- Trimmer-a abiaraztea:
- Ziurtatu bateria instalatuta dagoela.
- Eduki sakatuta heldulekuan dagoen segurtasun-botoia.
- While holding the safety button, squeeze the variable speed trigger to start the trimmer. Release the safety button once the trimmer is running.
- Mozteko teknikak:
- Eutsi ebakitzaileari bi eskuekin ondo.
- Mantendu distantzia eroso bat ebaketa-burutik.
- Use a sweeping motion, moving the trimmer from side to side, to cut grass and weeds.
- Avoid hitting hard objects like rocks, fences, or concrete to prevent damage to the line and trimmer.
- Advancing Trimmer Line (Bump Head):
- While the trimmer is running at full speed, gently tap the bump head on a firm, flat surface (e.g., the ground).
- This action will automatically advance a small amount of cutting line. The line limiter blade on the guard will cut the line to the correct length.
- Ebaketa-makinaren gelditzea: Release the variable speed trigger. The cutting head will stop rotating.
5. Mantentzea
- Garbiketa: After each use, disconnect the battery and clean the trimmer with a damp cloth. Remove any grass, dirt, or debris from the cutting head and air vents. Do not use harsh chemicals.
- Lerroaren ordezkapena: When the trimmer line runs out, refer to the detailed instructions in the full product manual for specific steps on how to reload the bump head with new 0.080-inch trimmer line.
- Bateria zaintzea: Store the battery in a cool, dry place away from direct sunlight. Do not store the battery in a discharged state for extended periods.
- Biltegiratzea: Store the trimmer in a dry, secure location, out of reach of children. If storing for an extended period, remove the battery.
6. Arazoak
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Trimmer ez da martxan jartzen | Battery not charged or improperly installed; Safety button not pressed; Trigger not squeezed. | Ensure battery is charged and correctly inserted. Press safety button before squeezing trigger. |
| Trimmer line does not advance | Line tangled or empty; Bump head not tapped correctly. | Check line spool for tangles or replace line. Tap bump head firmly while trimmer is running. |
| Ebaketa-errendimendu murriztua | Trimmer line too short or worn; Battery charge low. | Aurreratu edo ordezkatu ebakitzeko haria. Kargatu bateria. |
| Gehiegizko bibrazioa | Damaged cutting head or unbalanced line. | Inspect cutting head for damage. Ensure line is evenly distributed. |
7. Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Marka | Kobalt |
| Modelo zenbakia | 4332692973 |
| Energia iturria | Battery Powered (40-Volt Max) |
| Ebaketa-zabalera | 13 hazbete |
| Linearen diametroa | 0.080 inches (dual line) |
| Bateria mota | 1 litio ioi bateria behar da (barne) |
| Kargatzeko Denbora | 75 minutes (with included 2.5Ah battery and charger) |
| Exekuzioa | Gehienez 40 minutu (2.5Ah bateriarekin) |
| Elementuaren pisua | 14.62 kilo |
| Produktuaren neurriak | 38 x 13 x 13 hazbete |
| Muntaia Beharrezkoa | Bai |
| UPC | 841821022297 |
8. Bermea eta Laguntza
This Kobalt product comes with a manufacturer's warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your purchase or visit the official Kobalt website. For technical support, replacement parts, or service inquiries, please contact Kobalt customer service through their official channels.
