1. Sarrera
This manual provides detailed instructions for the GANA HS-PT-1080P 3-Port HDMI Switch. This device allows you to connect up to three HDMI source devices to a single HDMI display, eliminating the need to constantly swap cables. It supports Full HD 1080p resolution and 3D video, ensuring optimal and lossless signal transmission.
Ezaugarri nagusiak hauek dira:
- Supports Full HD 1080p (1920x1080P) and 3D video.
- 3 HDMI input ports and 1 HDMI output port.
- Plug and Play operation; no external power required.
- Gold-plated connectors for enhanced signal performance.
- HD Audio and HDCP compliant.
2. Produktua amaitu daview
The GANA HS-PT-1080P HDMI Switch is designed for simplicity and efficiency. It features three HDMI input ports, one HDMI output cable, and a manual selection button with corresponding LED indicators to show the active input.
2.1 Osagaiak
- HDMI Input Ports (x3): Connect your source devices (e.g., game console, Blu-ray player, laptop).
- HDMI Output Cable (x1): Connects to your display device (e.g., TV, monitor, projector).
- Hautatu botoia: Used to manually switch between the connected HDMI input sources.
- LED Indicators (x3): Light up to indicate which HDMI input port is currently active.
3. Konfiguratzeko argibideak
Follow these steps to set up your GANA HDMI Switch:
- Konektatu irteera: Plug the integrated HDMI output cable from the GANA HDMI Switch into an available HDMI input port on your display device (TV, monitor, or projector).
- Sarrerako gailuak konektatu: Connect your HDMI source devices (e.g., TV Box, Xbox, PlayStation, PC, Blu-ray player) to the HDMI Input 1, Input 2, and Input 3 ports on the GANA HDMI Switch.
- Piztu: Ensure all connected devices and your display are powered on. The HDMI switch is 'Plug and Play' and draws power directly from the connected HDMI sources, so no external power adapter is needed.
- Hautatu iturria: Use the 'Select' button on the HDMI switch to choose the desired input source. The corresponding LED indicator will illuminate to show the active input.
4. Funtzionamendu-argibideak
Operating the GANA HDMI Switch is straightforward:
- Automatic Input Detection: The switch may automatically detect and switch to a newly powered-on HDMI source.
- Manual Input Selection: To switch between active HDMI sources, press the 'Select' button located on the top of the switch. Each press will cycle through the available inputs (Input 1 → Input 2 → Input 3 → Input 1).
- LED adierazleak: Observe the LED indicators (1, 2, 3) next to the 'Select' button. The illuminated LED corresponds to the currently active HDMI input.
5. Mantentzea
To ensure the longevity and optimal performance of your GANA HDMI Switch, follow these maintenance guidelines:
- Garbiketa: Use a soft, dry cloth to clean the exterior of the switch. Avoid using liquid cleaners or abrasive materials, as they may damage the device.
- Biltegiratzea: Store the switch in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
- Manipulazioa: Handle the device and its connectors with care. Avoid bending or pulling the HDMI cables excessively, which can damage the internal wiring or ports.
- Ingurumena: Do not expose the switch to water, moisture, or high humidity.
6. Arazoak
If you encounter issues with your GANA HDMI Switch, refer to the following troubleshooting tips:
- Irudi/seinalerik ez:
- Ensure all HDMI cables are securely connected to both the source devices, the switch, and the display.
- Verify that the correct input source is selected on the HDMI switch (check the LED indicator).
- Confirm that your display is set to the correct HDMI input channel.
- Try connecting the source device directly to the display to rule out cable or source issues.
- Restart all connected devices (source, switch, display).
- Flickering Picture or Poor Quality:
- Egiaztatu kable konexio solteak.
- Ensure you are using high-quality HDMI cables.
- Reduce the cable length if possible, especially for longer runs.
- Some devices may require a specific boot order. Try powering on the display first, then the HDMI switch, then the source device.
- Audiorik ez:
- Verify that the audio settings on your source device are correctly configured for HDMI output.
- Check the audio settings on your display device.
- Ziurtatu HDMI kableek audio transmisioa onartzen dutela.
- Etengailuak ez du erantzuten:
- Ensure at least one HDMI source device is powered on and connected to provide power to the switch.
- Disconnect and reconnect all HDMI cables to reset the connections.
7. Zehaztapenak
| Ezaugarri | Deskribapena |
|---|---|
| Modelo zenbakia | HS-PT-1080P |
| Marka | GANA |
| Sarrerako Portuak | 3 x HDMI |
| Irteera Portuak | 1 x HDMI |
| Onartutako Ebazpena | Up to 1080p (1920x1080P), 3D |
| Konektore mota | HDMI |
| Elikatze Hornidura | No external power required (powered by HDMI source) |
| Produktuaren neurriak | 8.2 x 5.33 x 1.75 cm |
| Produktuaren pisua | 81 g |
| UPC | 601285150765 |
| Gailu bateragarriak | Most devices with an HDMI port |
8. Bermea eta Laguntza
GANA products are designed for reliability and performance. For specific warranty information regarding your GANA HS-PT-1080P HDMI Switch, please refer to the warranty card included with your purchase or visit the official GANA webgunea.
If you require technical assistance or have questions not covered in this manual, please contact GANA customer support through their official channels. When contacting support, please have your product model number (HS-PT-1080P) and purchase details readily available.
