Zipper ZI-GRM1100

Zipper ZI-GRM1100 Rotary Poultry Plucker Instruction Manual

Model: ZI-GRM1100

1. Sarrera

This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your Zipper ZI-GRM1100 Rotary Poultry Plucker. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage.

The Zipper ZI-GRM1100 is designed for rapid and efficient feather removal from poultry. It features a powerful motor, durable stainless steel construction, and 110 interchangeable rubber fingers for effective plucking. This machine significantly reduces the time and effort required for poultry processing compared to manual methods. It can pluck up to two birds simultaneously in approximately 15 seconds, after proper scalding at around 55°C. The integrated water inlet allows for continuous rinsing, and its transport wheels ensure easy mobility. The asynchronous motor is powerful, silent, and maintenance-free.

2. Segurtasun-argibideak

WARNING: Failure to follow these safety instructions may result in serious injury or damage to the equipment.

2.1 Segurtasun orokorra

  • Always read and understand the entire instruction manual before operating the machine.
  • Mantendu haurrak eta baimenik gabeko langileak makinatik urrun funtzionatzen ari diren bitartean.
  • Operate the machine on a stable, level, and non-slip surface to prevent tipping.
  • Lan-eremuan argiztapen egokia ziurtatu.
  • Ez erabili makina piezaren bat hondatuta edo falta bada.
  • Erabili babes pertsonaleko ekipamendu (EPI) egokia, eskularruak eta begien babesa barne.

2.2 Segurtasun elektrikoa

  • Connect the machine only to a properly grounded electrical outlet with the correct voltage (230 V, 50 Hz).
  • Never operate the machine in wet conditions or with wet hands.
  • Ensure the power cord is not damaged, pinched, or exposed to sharp edges or heat.
  • Always disconnect the power supply before performing any maintenance, cleaning, or when the machine is not in use.
  • Do not use extension cords unless absolutely necessary, and ensure they are rated for the machine's power requirements and are properly grounded.

2.3 Segurtasun operatiboa

  • Keep hands, hair, loose clothing, and jewelry away from all moving parts, especially the plucking fingers, during operation.
  • Ensure poultry is properly scalded at approximately 55°C before plucking to achieve optimal results and prevent skin damage.
  • Do not overload the machine; it is designed to pluck up to two birds simultaneously.
  • Use the water inlet connection to continuously rinse feathers and debris during operation, keeping both hands free for handling poultry.
  • Never attempt to clear jams or remove poultry while the machine is running. Always turn off and unplug the machine first.

3. Produktua amaitu daview

The Zipper ZI-GRM1100 Rotary Poultry Plucker is a robust and efficient tool for poultry processing. Key components and features include:

  • Altzairu herdoilgaitzezko danborra: Durable and hygienic, meeting food quality standards.
  • 110 Interchangeable Rubber Fingers: Designed for effective and gentle feather removal.
  • Powerful Asynchronous Motor: 1100 W, 230 V, 50 Hz, providing 300 rpm rotation speed. Silent and maintenance-free.
  • Integrated Water Inlet: Allows for continuous rinsing during operation, improving efficiency and cleanliness.
  • Garraio Gurpilak: Two wheels for easy maneuverability and transport.
  • Marko sendoa: Funtzionamenduan zehar egonkortasuna eskaintzen du.
Zipper ZI-GRM1100 Rotary Poultry Plucker overall view

3.1. irudia: Orokorrean view of the Zipper ZI-GRM1100 Rotary Poultry Plucker. This image shows the stainless steel drum, the motor housing, the support frame, and the transport wheels, providing a complete perspective of the machine's design.

Close-up of water inlet connection on Zipper ZI-GRM1100

3.2. irudia: Gertutik view of the water inlet connection. This brass fitting allows for a hose to be attached, providing a continuous water supply to rinse feathers during the plucking process, enhancing efficiency and hygiene.

Barrualdea view of Zipper ZI-GRM1100 with rubber plucking fingers

3.3. irudia: Goitik behera view of the plucking drum interior, showing the arrangement of the 110 interchangeable rubber fingers. These fingers are crucial for gently yet effectively removing feathers from poultry.

4. Konfigurazioa

4.1 Desontziratzea eta ikuskatzea

  • Kontu handiz kendu osagai guztiak ontzitik.
  • Inspect the machine for any signs of shipping damage. If damage is found, do not operate the machine and contact your supplier immediately.
  • Ziurtatu zerrendatutako osagai guztiak daudela.

4.2 Muntaketa (beharrezkoa bada)

The Zipper ZI-GRM1100 typically requires minimal assembly, primarily attaching the support legs and wheels. Follow these general steps:

  1. Attach the support legs to the main body of the plucker using the provided hardware. Ensure all bolts are securely tightened.
  2. Mount the transport wheels onto the designated axles on the support frame.
  3. Verify that the machine is stable and all connections are secure before proceeding.

4.3 Placement and Connections

  • Place the plucker on a firm, level surface in an area with good drainage, as water will be used during operation.
  • Ensure the location is near a suitable electrical outlet (230 V, 50 Hz) and a water source.
  • Connect a standard garden hose to the water inlet connection on the side of the drum. Ensure the connection is tight to prevent leaks.
  • Entxufatu korronte-kablea lurreko hartune elektriko batean.

5. Funtzionamendu-argibideak

Follow these steps for safe and effective poultry plucking:

  1. Poultry Preparation: Ensure the poultry has been properly scalded. The recommended water temperature for scalding is approximately 55°C (130°F). Proper scalding loosens the feathers, making them easier to remove.
  2. Load Poultry: With the machine turned OFF and UNPLUGGED, carefully place up to two scalded birds into the plucking drum.
  3. Start Water Flow: Turn on the water supply to the plucker. A continuous flow of water helps to rinse away feathers and debris during operation.
  4. Hasi makina: Plug in the machine and turn on the power switch. The drum will begin to rotate, and the rubber fingers will start plucking the feathers.
  5. Plucking Process: The plucking process is typically very fast, often completed within 15 seconds for properly scalded birds. Observe the poultry to determine when most feathers have been removed.
  6. Gelditu makina: Once plucking is complete, turn off the power switch and unplug the machine. Turn off the water supply.
  7. Remove Poultry: Carefully remove the plucked poultry from the drum.
  8. Inspect and Finish: Inspect the poultry for any remaining feathers and remove them manually if necessary.

Oharra: Over-plucking can damage the skin. Monitor the process closely to achieve optimal results.

6. Mantentzea

Regular maintenance ensures the longevity and optimal performance of your Zipper ZI-GRM1100 plucker.

6.1 Garbiketa

  • Erabilera bakoitzaren ondoren: Immediately after each plucking session, disconnect the power and thoroughly rinse the inside and outside of the drum with water to remove all feathers and debris. The stainless steel drum is designed for easy cleaning.
  • Use a brush if necessary to dislodge stubborn debris from around the rubber fingers.
  • Ensure all water drains completely from the machine to prevent stagnazioa eta bakterioen hazkundea.
  • Garbitu iragarkiarekin kanpoko gainazalakamp oihal.

6.2 Ikuskapena

  • Rubber Fingers: Periodically inspect the rubber plucking fingers for signs of wear, cracking, or damage. Worn fingers can reduce plucking efficiency. Replace any damaged fingers promptly.
  • Kable elektrikoa: Check the power cord for any cuts, fraying, or damage. Do not use the machine if the cord is compromised.
  • Motorra: The asynchronous motor is designed to be maintenance-free. Do not attempt to open or service the motor yourself.

6.3 Biltegiratzea

  • Store the plucker in a clean, dry place, protected from extreme temperatures and direct sunlight.
  • Ensure the machine is completely dry before storing to prevent corrosion.

7. Arazoak

This section addresses common issues you might encounter with your Zipper ZI-GRM1100 plucker.

ArazoaKausa posibleaIrtenbidea
Makina ez da martxan jartzen.
  • Argindar kablea ez dago konektatuta.
  • Ez dago korronterik entxufetik.
  • Etengailua itzalita dago.
  • Barne matxura elektrikoa.
  • Ziurtatu elikatze-kablea lurrera konektatutako entxufe batera ondo konektatuta dagoela.
  • Egiaztatu zirkuitu-hauslea edo saiatu beste entxufe batekin.
  • Jarri etengailua 'ON' posiziora.
  • Arazoak jarraitzen badute, jarri harremanetan zerbitzu-langile kualifikatuekin.
Poor plucking performance / Feathers not removed effectively.
  • Poultry not properly scalded.
  • Worn or damaged rubber fingers.
  • Overloading the machine.
  • Ensure scalding water is at the correct temperature (approx. 55°C) and poultry is immersed for the appropriate duration.
  • Inspect and replace any worn or damaged rubber fingers.
  • Reduce the number of birds being plucked simultaneously.
Bibrazio gehiegi edo zarata ezohikoa.
  • Machine not on a level surface.
  • Osagai solteak.
  • Motor arazoa.
  • Relocate the machine to a stable, level surface.
  • Check and tighten all bolts and fasteners.
  • If the noise or vibration persists and seems to originate from the motor, discontinue use and contact qualified service personnel.

For problems not listed here or if solutions do not resolve the issue, please contact your dealer or a qualified service technician.

8. Zehaztapenak

EzaugarriZehaztapena
EreduaZI-GRM1100
MarkaKremailera
Boterea1100 W
liburukiatage / Maiztasuna230V / 50Hz
Errotazio Abiadura300 bira/min
Number of Plucking Fingers110
Pisu garbia43 kg
Pisu Gordina48 kg
Neurriak (L x W x H)78 x 68 x 91.5 cm
Danborraren materialaAltzairu herdoilgaitza

9. Bermea eta Laguntza

9.1 Bermearen informazioa

The Zipper ZI-GRM1100 Rotary Poultry Plucker comes with a 2 urteko bermea from the date of purchase. This warranty covers manufacturing defects and material faults under normal use. Please note that the warranty does not cover wear parts, such as the rubber plucking fingers, which are subject to normal wear and tear during operation.

To make a warranty claim, please retain your proof of purchase and contact your retailer or the authorized Zipper service center.

9.2 Bezeroarentzako laguntza

For technical assistance, spare parts, or further inquiries, please contact your authorized Zipper dealer or visit the official Zipper weblaguntza baliabideen gunea.

When contacting support, please have your model number (ZI-GRM1100) and purchase date available.

Erlazionatutako dokumentuak - ZI-GRM1100

Aurreview ZIPPER ZI-GRM400, ZI-GRM1100, ZI-GRM1650 Oilasko-luma kentzeko makinaren erabiltzailearen eskuliburua eta segurtasun-gida
ZIPPER oilasko-luma kentzeko ZI-GRM400, ZI-GRM1100 eta ZI-GRM1650 modeloen erabiltzailearen eskuliburu osoa eta segurtasun-gida, muntaketa, funtzionamendua, mantentze-lanak eta arazoak konpontzea barne hartzen dituena.
Aurreview ZIPPER Aire Konpresore Isilak ZI-COM24SI, ZI-COM50SI, ZI-COM90SI Erabiltzaile Eskuliburua
ZIPPER aire konpresore isilen erabiltzailearen eskuliburua, ZI-COM24SI, ZI-COM50SI eta ZI-COM90SI modeloak. Zehaztapen teknikoak, osagaiak, segurtasun argibideak, muntaketa, funtzionamendua, mantentze-lanak, arazoak konpontzea eta ordezko piezak barne hartzen ditu.
Aurreview ZI-RPE60C & ZI-RPE90C Bedienungsanleitung
Diese Betriebsanleitung enthält wichtige Informationen zur sicheren Inbetriebnahme, Handhabung, Wartung und zum Betrieb der ZIPPER Rüttelplatten ZI-RPE60C eta ZI-RPE90C.
Aurreview ZIPPER 40V kargagailuaren eta bateriaren erabiltzailearen eskuliburua
ZIPPERren 40V-ko bateria-kargagailuaren (ZI-LGR40V-AKKU) eta 40V-ko baterien (ZI-BTR40V-AKKU, ZI-BTR40V2AH-AKKU) erabiltzailearen eskuliburu osoa, segurtasuna, funtzionamendua, mantentze-lanak eta zehaztapenak biltzen dituena.
Aurreview Bedienungsanleitung ZIPPER Rüttelplatten ZI-RPE60C & ZI-RPE90C
Umfassende Bedienungsanleitung für die ZIPPER Rüttelplatten ZI-RPE60C eta ZI-RPE90C. Enthält wichtige Informationen zur sicheren Inbetriebnahme, Handhabung, Wartung und technischen Spezifikationen dieser hochwertigen Baumaschinen.
Aurreview ZIPPER presio handiko garbigailuaren ZI-HDR165 eta ZI-HDR195 erabiltzailearen eskuliburua
ZIPPER presio handiko garbigailuen erabiltzailearen eskuliburu osoa, ZI-HDR165 eta ZI-HDR195 modeloak. Segurtasun-argibideak, zehaztapen teknikoak, funtzionamendu-jarraibideak, mantentze-lanak, arazoak konpontzea eta ordezko piezen informazioa barne hartzen ditu.