Sarrera
Eskerrik asko erosketagatik.asing the WulaWindy Digital Wooden LED Alarm Clock. This manual provides detailed instructions for setting up, operating, and maintaining your new clock. Please read this manual thoroughly before use to ensure proper function and to maximize your product experience.
Segurtasun Informazioa
- Ez jarri gailua tenperatura altuen, eguzki-argiaren eraginpean edo hezetasun handiaren eraginpean.
- Saihestu erlojua erortzea edo kolpe gogorren eraginpean jartzea.
- Use only the provided USB power cable.
- Mantendu haurren eskura.
- Ez saiatu gailua zeuk desmuntatzen edo konpontzen. Jarri harremanetan bezeroarentzako arreta-zerbitzuarekin zerbitzua behar izanez gero.
Paketearen edukia
- WulaWindy Digital Wooden LED Alarm Clock
- USB energia kablea
- Erabiltzailearen eskuliburua
Produktua amaituview
The WulaWindy Digital Wooden LED Alarm Clock features a minimalist cube design with a clear LED display. It shows time, date, and temperature, and includes multiple alarm settings and brightness adjustment.
Aurrealdea View
1. irudia: Aurrealdea view of the clock, showing the digital time display.
Itzuli View eta Kontrolak
Figure 2: Rear panel with control buttons and switches.
Figure 3: Detailed diagram of clock dimensions and control labels.
Kontrol nagusiak:
- SET botoia: Ezarpenak sartzeko eta berresteko erabiltzen da.
- GORA botoia: Used to increase values or navigate options.
- BEHERA botoia: Used to decrease values or navigate options, also activates sound control.
- Brightness Adjustment Roller: Located on the back, used to manually adjust display brightness.
- Alarm Switches (1-2-3): Individual switches to enable/disable each alarm.
- 12/24 Hour Setting Switch: Toggles between 12-hour and 24-hour time formats.
- Sarrerako ataka: USB kablea konektatzeko.
- BERREZARRI zuloa: A small pinhole to reset all settings to factory defaults.
Konfigurazioa
Erlojua piztu
The clock can be powered via the included USB cable. It also supports 3 AAA batteries (not included) for temporary backup during power outages, but continuous battery use is not recommended due to high power consumption.
- Connect the USB power cable to the input port on the back of the clock.
- Plug the other end of the USB cable into a USB power adapter (not included) or a powered USB port (e.g., on a computer or TV box).
- Pantaila piztuko da, erlojua piztuta dagoela adieraziz.
- Aukerakoa: Insert 3 AAA batteries into the battery compartment for power backup.
Funtzionamendua
The clock features three buttons on the back: SET, UP, and DOWN. These buttons are used for all settings. A long press (holding) or short press (pressing) will activate different functions.
Data eta ordua ezartzea
- Eduki sakatuta SET botoia for approximately 3 seconds to enter time/date setting mode.
- Urtearen ezarpena: The year will flash. Use the UP/DOWN buttons to adjust the year. Press SET to confirm and move to the next setting.
- Hileko ezarpena: Adjust the month with UP/DOWN. Press SET.
- Egunaren ezarpena: Adjust the day with UP/DOWN. Press SET.
- 12H/24H pantaila: Use UP/DOWN to toggle between 24H and 12H format. Press SET.
- Ordu-ezarpena: Adjust the hour with UP/DOWN. If in 12H mode, a small dot next to the hour indicates PM. Press SET.
- Minutu ezarpena: Adjust the minutes with UP/DOWN. Press SET.
- Continue pressing SET to cycle through alarm settings (see below) and power saving mode until the clock returns to normal display.
Alarmak ezartzea
The clock supports three independent alarms (A1, A2, A3).
- Eduki sakatuta SET botoia for approximately 3 seconds to enter setting mode.
- After setting the time, you will reach the alarm settings.
- Alarm 1 (A1) On/Off: The display will show 'oNA1' (On) or '--A1' (Off). Use UP/DOWN to toggle. Press SET.
- Alarm 1 Hour: Adjust the hour for Alarm 1 with UP/DOWN. Press SET.
- Alarm 1 Minutes: Adjust the minutes for Alarm 1 with UP/DOWN. Press SET.
- Repeat steps for Alarm 2 (A2) and Alarm 3 (A3).
- To enable or disable an alarm quickly, use the physical switches on the back of the clock labeled 'ALARM 1-2-3'.
Figure 4: Brightness levels from L0 (dim) to L3 (bright).
Distira doitzea
The clock offers adjustable brightness levels.
- Eskuzko doikuntza: Use the brightness adjustment roller on the back of the clock to set the desired brightness level (L0 to L3).
- Iluntze automatikoa: The display automatically dims to the lowest setting (L0) between 6 PM and 7 AM if the time is set correctly in 12H mode with PM indicated.
Display Modes (dP-1 / dP-2)
You can choose how the clock displays information.
- Sakatu labur SET botoia (do not hold).
- The display will show 'dP-1' or 'dP-2'. Use UP/DOWN to select:
- dP-1: Cycles between time (10 seconds), date (3 seconds), and temperature (2 seconds).
- dP-2: Displays only the time continuously.
- Sakatu SET zure hautaketa berresteko.
Figure 5: Sound control feature, activating display with sound or touch.
Sound Control / Power Saving Mode
This mode turns off the display after 15 seconds to save power. The display will reactivate when a sound (e.g., a clap) or touch is detected.
- Eduki sakatuta BEHERA botoia gutxi gorabehera 3 segundoz.
- The display will show 'oNSd' (On) or '--Sd' (Off). Use UP/DOWN to toggle.
- Press DOWN again to confirm and exit.
Temperature Units (Celsius/Fahrenheit)
- Short press the UP button (do not hold).
- The display will show 'C' or 'F'. Use UP/DOWN to toggle between Celsius and Fahrenheit.
- The setting will automatically save after a few seconds.
Errepikatzeko funtzioa
When an alarm sounds, press any button on the top of the clock to activate the snooze function. The alarm will sound again after a short interval.
Mantentzea
- Garbitu erlojua zapi leun eta lehor batekin. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
- Ensure the USB port and battery compartment remain free of dust and debris.
- If storing the clock for an extended period, remove the AAA batteries to prevent leakage.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Erlojuaren pantaila itzalita dago. | No power; Power saving mode is active. | Ensure USB cable is securely connected to a power source. Tap the clock or make a sound to activate display if in power saving mode. |
| Clock loses time or settings. | Power interruption; No backup batteries or batteries are depleted. | Ensure continuous USB power. Install fresh AAA batteries for backup. Reset time if necessary. |
| Alarmak ez du jotzen. | Alarm is not enabled; Alarm volume is too low. | Check the physical alarm switch on the back. Ensure alarm time is set correctly. (Note: Volume control is mentioned in feature bullets but not explicitly detailed in reviews for setting, assume fixed or adjusted via general settings if available). |
| Pantaila oso distiratsua/iluna da. | Brightness setting is not optimal. | Adjust the brightness using the roller on the back of the clock. |
| Tenperaturaren irakurketa ez da zehatza. | Environmental factors; Sensor calibration. | Ensure the clock is not placed near heat sources or in direct sunlight. The temperature sensor provides an approximate ambient reading. |
Zehaztapenak
- Marka: WulaWindy
- Eredua: 8541847779
- Bistaratzeko mota: LED digitala
- Energia iturria: Corded Electric (USB), 3x AAA batteries (backup only, not included)
- Funtzioak: Time (12/24H), Date, Temperature (C/F), 3 Alarms, Brightness Adjustment, Sound Control
- Materiala: Egurra (Markoa)
- Produktuaren neurriak: 3.54"W x 3.14"H (approx. 2.5" x 2.5" x 2.5" cube based on images/reviews)
- Elementuaren pisua: 0.3 libra (4.8 ontza)
Bermea eta Laguntza
WulaWindy products are manufactured with quality in mind. For any questions, technical support, or warranty claims, please refer to your purchase platform or contact WulaWindy customer service directly. Please retain your proof of purchase for warranty purposes.