1. Sarrera
The LanParte Wireless LANC Remote Control (Model LRC-02) provides comprehensive wireless control for Panasonic GH4, GH5, and other cameras utilizing the LANC protocol. This device allows users to remotely manage video recording, photo capture, and zoom functions, enhancing operational flexibility during shoots.
2. Paketearen edukia
Egiaztatu behean zerrendatutako elementu guztiak zure paketean sartuta daudela:
- Haririk gabeko urruneko transmisorea
- Haririk gabeko hargailua
- 2.5mm to 2.5mm LANC Connection Cable
- Hot Shoe Adapter Screw
- Mini Screwdriver (for battery compartment)
Image: All components of the LanParte Wireless LANC Remote Control system, including the transmitter, receiver, cable, hot shoe adapter, and screwdriver.
3. Produktua amaitu daview
3.1. Igorlea
The transmitter features several buttons for controlling camera functions:
- Argazkiaren botoia: Press to capture a still image.
- W/T Buttons: Control zoom functions (Wide and Telephoto) when using compatible power zoom lenses.
- Cam Power Button: Intended to power the camera on/off. Note: Functionality may vary by camera model.
- START/STOP botoia: Initiates and terminates video recording.
3.2. Hartzailea
The receiver connects to your camera and communicates wirelessly with the transmitter:
- 2.5mm LANC Port: Connects to the camera's LANC input using the provided cable.
- Argi adierazlea: Provides status feedback (e.g., power, connection status).
- Muntatzeko haria: Allows attachment to a hot shoe or other mounting points using the adapter screw.
Image: The LanParte wireless remote transmitter and receiver, connected by the 2.5mm LANC cable.
4. Konfigurazioa
4.1. Transmisorearen bateriaren instalazioa
- Bilatu bateriaren konpartimentua transmisorearen atzealdean.
- Use the provided mini screwdriver to open the battery compartment cover.
- Insert a CR2032 coin cell battery, ensuring correct polarity (+/-).
- Itxi bateriaren konpartimentuaren estalkia modu seguruan.
4.2. Receiver Connection and Mounting
- Connect one end of the 2.5mm LANC connection cable to the receiver's 2.5mm port.
- Connect the other end of the cable to the LANC input port on your Panasonic GH4, GH5, or compatible camera.
- Attach the hot shoe adapter screw to the receiver's mounting thread.
- Slide the receiver onto your camera's hot shoe and tighten the adapter screw to secure it.
Image: A user holding the LanParte remote transmitter, with the receiver connected to a Panasonic GH5 camera via cable.
5. Funtzionamendu-argibideak
Ensure both the camera and the remote control system are powered on before operation.
- Power On/Off Camera: Sakatu Kam Power button on the transmitter. Note that this function's compatibility can vary by camera model.
- Bideo grabaketa hasi/gelditu: Sakatu HASI/GELDITU button to begin recording. Press it again to stop recording.
- Argazkia atera: Sakatu Argazkia button to take a still photograph.
- Zoomaren kontrola: If using a power zoom lens, press the W button to zoom out (Wide) and the T button to zoom in (Telephoto).
6. Mantentzea
- Keep the remote control and receiver clean and dry. Use a soft, dry cloth for cleaning.
- Saihestu gailua muturreko tenperatura, hezetasun edo zuzeneko eguzki-argitara.
- When not in use for extended periods, consider removing the battery from the transmitter to prevent leakage.
- Store the device in a protective case to prevent physical damage.
7. Arazoak
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Urrutiko agintea ez da erantzuten. | Low or dead transmitter battery. Receiver not powered or connected. Out of range. | Replace transmitter battery. Ensure receiver is properly connected to camera's LANC port. Move closer to the receiver. |
| Cam Power button does not work. | Camera model does not support remote power control via LANC. | This is a camera-specific limitation. Manually power on/off the camera. |
| Zoom function not working. | Non-power zoom lens attached. Power zoom function disabled in camera settings. | Ensure a compatible power zoom lens is used. Check camera settings to enable power zoom control. |
| Recording/Photo not activating. | Incorrect camera mode. Loose cable connection. | Set camera to appropriate video or photo mode. Verify the LANC cable is securely connected to both receiver and camera. |
8. Zehaztapenak
- Modelo zenbakia: LRC-02
- Marka: LanParte
- Elementuaren pisua: 8.3 ontza
- Konektibitate Teknologia: Wireless (Infrared, based on product description)
- Gailu bateragarriak: Cameras (specifically Panasonic GH4, GH5, and LANC protocol cameras)
- Onartutako gailuen gehienezko kopurua: 1 (one receiver per camera)
- Ezaugarri berezia: Diseinu ergonomikoa
9. Bermea eta Laguntza
LanParte products are typically covered by a limited manufacturer's warranty. For specific warranty details, duration, and terms, please refer to the documentation provided with your purchase or visit the official LanParte webgunea.
For technical support, troubleshooting assistance, or service inquiries, please contact LanParte customer support directly through their official channels. Provide your product model number (LRC-02) and purchase information when seeking support.
