Sarrera
Thank you for choosing the Project Source 2-Pack 7.4-in W White LED Flush Mount Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixtures. Please read this manual thoroughly before installation and retain it for future reference.
These LED flush mount ceiling lights are designed for both indoor and outdoor living spaces, featuring a wet-rated design. They are Energy Star rated for efficiency, provide a color temperature of 3000K, a Color Rendering Index (CRI) of 90, and an output of 730 lumens.
Segurtasun Informazioa
Always follow basic safety precautions when installing or working with electrical fixtures to reduce the risk of fire, electric shock, or personal injury.
- OHARRA: Deskarga elektrikoa jasateko arriskua. Deskonektatu korrontea fusiblean edo etengailutik instalatu edo zaindu aurretik.
- OHARRA: Risk of fire. Use only in circuits rated for the fixture.
- Instalazio-prozesuari buruz ziur ez bazaude, kontsultatu elektrizista kualifikatu batekin.
- Do not modify the fixture in any way. Any modifications may void the warranty and create a safety hazard.
- Ziurtatu konexio guztiak seguru eta behar bezala isolatuta daudela.
- Do not install near heat sources or in areas with excessive moisture beyond its wet-rated capabilities.
- This product is designed for direct wire connection and does not use a plug.
Kutxan dagoena
Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela:
- 2 x Project Source 7.4-in LED Flush Mount Light Fixtures
- Muntatzeko Hardwarea
- Urruneko kontrol (Note: While the product data mentions a remote control, typical flush mount lights of this type do not include one. Please verify your specific package contents.)
Konfigurazioa (Instalazioa)
Installation should be performed by a qualified individual. Always ensure power is disconnected at the circuit breaker before starting.
- Itzali energia: Locate the circuit breaker controlling the light fixture's location and turn it off. Verify power is off using a voltage probatzailea.
- Prestatu muntatzeko gainazala: Ziurtatu kutxa elektrikoa ondo muntatuta dagoela eta aparatuaren pisua eusteko gai dela.
- Konektatu kableak: Connect the fixture's wires to the corresponding house wires using wire nuts (typically black to black, white to white, and ground to ground). Ensure all connections are tight and secure.
- Muntaia: Carefully align the fixture with the mounting holes on the electrical box and secure it using the provided mounting hardware.
- Berrezarri boterea: Behin gailua ondo instalatuta dagoenean, berrezarri korrontea etengailu elektrikoan.
Image: Two Project Source 7.4-inch white LED flush mount ceiling lights, showcasing their compact and low-profile design suitable for various indoor and outdoor applications.
Funtzionamendu-argibideak
The Project Source LED Flush Mount Light operates like a standard ceiling light fixture. Once properly installed and power is restored, it can be controlled via a standard wall switch.
- Piztu/Itzaltzea: Argia piztu edo itzaltzeko, piztu aparatuari konektatutako hormako etengailua.
- Energia-eraginkortasuna: As an Energy Star rated LED fixture, it consumes significantly less energy than traditional incandescent bulbs, providing long-term savings.
Mantentzea
These LED fixtures require minimal maintenance due to their long lifespan. However, occasional cleaning is recommended to maintain optimal light output and appearance.
- Garbiketa: Ziurtatu argindarra itzalita dagoela garbitu aurretik. Erabili zapi leun, lehor edo apur bat lehorra.amp zapi bat erabili gailuaren gainazala garbitzeko. Ez erabili garbitzaile edo disolbatzaile urratzailerik, akabera edo osagai elektrikoak kaltetu baitezakete.
- LED Iraupena: The integrated LED light source is designed for long-term use and is not user-replaceable. If the LED fails, the entire fixture typically requires replacement.
Arazoak konpontzea
Argi-gailuarekin arazoak badituzu, jo ezazu honako arazo eta irtenbide ohikoenei:
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Argia ez da pizten. | Ez dago argindarrik aparatura; kableatu solteak; etengailu akastuna. | Egiaztatu zirkuitu-hauslea. Ziurtatu kable-konexio guztiak ondo daudela. Probatu hormako etengailua. |
| Argi distira. | Kableatu solteak; bateraezina den etengailu erregulatzailea (hala badagokio); potentzia gorabeherak. | Verify wire connections. Ensure the fixture is not connected to an incompatible dimmer. Consult an electrician for power issues. |
| Argi-irteera ahula edo ez-konsistentea da. | Dust accumulation on diffuser; aging LED components. | Clean the diffuser. If the issue persists and the fixture is old, it may be reaching the end of its lifespan. |
| Fixture makes humming noise. | Loose mounting; electrical interference. | Ensure fixture is securely mounted. Consult an electrician if noise persists. |
Zehaztapenak
- Modelo zenbakia: CLL56-2WW
- Produktuaren neurriak: 7.4 x 7.4 x 1.4 hazbete
- Pisua: 2.15 Pounds (per pack, total for 2 lights)
- Marka: Proiektuaren iturria
- Kolorea: Zuria
- Argi-tresnaren forma: Sabaia (Integratua)
- Barruko/Kanpoko erabilera: Indoor/Outdoor (Wet Rated)
- Energia iturria: Corded Electric (Direct Wire)
- Argiaren irteera: 730 lumen
- Kolore Tenperatura: 3000K
- Koloreen errendatze indizea (CRI): 90
- Energiaren balorazioa: Energy Star
Bermea eta Laguntza
Project Source products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or replacement parts, please contact Project Source customer service. Keep your purchase receipt as proof of purchase.
For assistance, please refer to the contact information provided on the product packaging or the official Project Source webgunea.
