1. Sarrera
This manual provides essential information for the safe and effective operation, setup, and maintenance of your Einhell Power X-Change 140Nm Cordless Impact Driver TE-CI 18/1 Li Solo. Please read these instructions carefully before using the tool and keep them for future reference. This product is designed for driving and removing screws and for light drilling tasks in wood and metal, utilizing its impact mechanism for high torque applications.
2. Segurtasun Jarraibide Orokorrak
Always observe the following safety precautions when using power tools to prevent electric shock, fire, and serious injury.
- Lan eremuko segurtasuna: Mantendu lan-eremua garbi eta ondo argiztatuta. Gune nahasi edo ilunak istripuak sor ditzakete. Ez erabili tresna elektrikoak leherketa-atmosferan, hala nola likido, gas edo hauts sukoien aurrean.
- Segurtasun elektrikoa: Saihestu gorputzaren kontaktua lurrarekin edo lurretik loturiko gainazalekin, hala nola hodiak, erradiadoreak, sukaldeak eta hozkailuak. Deskarga elektrikoa jasateko arriskua areagotu egiten da zure gorputza lurrarekin edo lurrarekin lotuta badago.
- Segurtasun pertsonala: Always wear eye protection. Use safety glasses, goggles, or a face shield. Wear hearing protection when operating the tool for extended periods. Dress properly; do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts.
- Tresnaren erabilera eta zaintza: Ez behartu tresna elektrikoa. Erabili zure aplikaziorako tresna elektriko egokia. Hobeto eta seguruago egingo du lana diseinatu zen abiaduran. Deskonektatu bateria-paketea tresna elektrikotik doikuntzak egin, osagarriak aldatu edo tresna elektrikoak gorde aurretik.
- Bateriaren erabilera eta zaintza: Kargatu fabrikatzaileak zehaztutako kargagailuarekin soilik. Bateria mota baterako egokia den kargagailu batek sute-arriskua sor dezake beste bateria batekin erabiltzen denean. Erabili tresna elektrikoak berariaz izendatutako bateria-paketeekin soilik.
3. Produktua amaitu daview eta Ezaugarriak
The Einhell TE-CI 18/1 Li Solo is a cordless impact driver designed for efficient screwdriving tasks. It is part of the Power X-Change family, allowing for interchangeable battery use with other Einhell tools.
- Momentu handiko irteera: Delivers up to 140 Nm of torque, suitable for driving large or long screws.
- Abiadura aldakorra kontrola: Electronic speed control allows for precise adjustment, ideal for delicate applications.
- 1/4" Hex Bit Mount: Features a 6.35 mm (1/4") hexagon fitting for quick and secure bit changes.
- LED argiztapen integratua: Three power LEDs provide optimal illumination of the work area.
- Diseinu ergonomikoa: Short, lightweight design with Softgrip surfaces ensures comfortable and tireless operation.
- Eraikuntza iraunkorra: Features an aluminum housing and rubber supports for enhanced protection and ruggedness.
- Gerriko Clip: A practical belt clip is included for convenient carrying and access during work.
Figure 1: The Einhell TE-CI 18/1 Li Solo Cordless Impact Driver, illustrating its compact design and the Power X-Change battery interface (battery sold separately).
4. Konfigurazioa
4.1 Battery Installation (Battery and Charger Sold Separately)
- Ensure the battery is fully charged using an Einhell Power X-Change charger.
- Align the battery pack with the base of the impact driver.
- Slide the battery pack into the tool until it clicks securely into place. Ensure it is firmly seated before operation.
- Bateria kentzeko, sakatu bateriaren alboetan dauden askatzeko botoia(k) eta irristatu kanporantz.
4.2 Bitak txertatzea eta kentzea
The impact driver uses a 1/4" (6.35 mm) hexagon fitting for impact-resistant bits.
- Pull the quick-change chuck sleeve forward.
- Insert the hexagon bit fully into the chuck.
- Release the sleeve. The bit should be securely locked in place. Pull on the bit to confirm it is properly seated.
- To remove the bit, pull the sleeve forward again and extract the bit.
Figure 2: Detail of the 1/4" hex bit mount and the three integrated LED lights, providing clear visibility of the work area.
5. Funtzionamendu-argibideak
5.1 Piztea/Itzaltzea eta Abiadura Kontrolatzea
- Hasteko: Press the ON/OFF switch (trigger). The integrated LEDs will illuminate the work area.
- Abiadura doitzea: The speed of the impact driver is controlled by the pressure applied to the ON/OFF switch. Pressing lightly results in lower speed, while pressing fully increases the speed up to 2300 RPM.
- Gelditu: Askatu ON/OFF etengailua.
5.2 Biraketa-noranzkoa
The direction of rotation (forward/reverse) is controlled by the selector switch located above the trigger.
- Forward Rotation (Screwing In): Push the selector switch to the left.
- Reverse Rotation (Screwing Out): Push the selector switch to the right.
- Blokeoaren posizioa: When the selector switch is in the middle position, the ON/OFF switch is locked, preventing accidental activation. Always engage the lock when not in use or when changing bits.
5.3 Using the Impact Driver
- Select the appropriate impact-resistant bit for your screw type and material.
- Position the bit firmly on the screw head.
- Start the tool by gently pressing the trigger, increasing pressure as needed. The impact mechanism will engage automatically when resistance is met, providing additional torque.
- Maintain a firm grip on the tool. The low reverse torque design helps reduce strain on the user.
Figure 3: An individual demonstrating the use of the Einhell impact driver for driving a screw into a wooden surface, highlighting its practical application.
6. Mantentzea
Mantentze-lan erregularrak zure inpaktu-bihurgailuaren iraupena eta errendimendu optimoa bermatzen ditu.
- Garbiketa: Erabilera bakoitzaren ondoren, garbitu tresnaren kaxa oihal leun eta lehor batekinamp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure ventilation openings are free from dust and debris.
- Biltegiratzea: Store the impact driver and battery pack in a dry, secure location, away from direct sunlight and extreme temperatures. Ensure the battery is removed from the tool before storage.
- Ikuskapena: Periodically check all screws and fasteners for tightness. Inspect the power tool for any signs of damage or wear. Do not use a damaged tool.
7. Arazoak
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Tresna ez da abiarazten. | Battery not charged or improperly inserted. Selector switch in lock position. | Charge battery. Ensure battery is fully inserted. Move selector switch to forward or reverse. |
| Potentzia edo errendimendu murriztua. | Low battery charge. Incorrect bit for application. Overheating. | Recharge battery. Use appropriate impact-rated bit. Allow tool to cool down. |
| Zati bat ez da ondo eusten. | Chuck sleeve not fully released. Bit not fully inserted. | Ensure chuck sleeve snaps back into place. Push bit in completely. |
8. Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Marka | Einhell |
| Modelo zenbakia | TE-CI 18/1 Li Solo (4510034) |
| Energia iturria | Battery Powered (18V Power X-Change) |
| Biraketa-abiadura maximoa | 2300 RPM |
| Momentu maximoa | 140 Newton metro |
| Bit Mount | 1/4" (6.35 mm) Hexagon |
| liburukiatage | 18 Volt |
| Elementuaren pisua | 1.18 kilogramo (2.58 libra) |
| Produktuaren neurriak | 7.8"L x 3.03"Z x 6.65"A |
| Materiala | Rubber, Aluminium |
| Dakarten osagaiak | Akku-Schlagschrauber (Impact Driver Body Only) |
| Pilak barne? | Ez |
| Pilak behar dira? | Yes (18V Lithium Ion) |
9. Bermea eta Laguntza
Einhell Power Tools come with a standard 2-year warranty. An additional 1-year warranty is available upon product registration, extending the total warranty period to 3 years. For warranty claims, technical support, or spare parts, please contact Einhell customer service or visit the official Einhell webgunea.
The intelligent ABS Battery Electronics and high-performance Li-Ion cells in Power X-Change batteries ensure efficiency, reliability, and durability.
