Serta Office Chair B076CKDB27 Instruction Manual

1. Konfigurazioa eta Muntaketa

This Serta office chair requires assembly. Please follow the steps below carefully to ensure proper and safe setup. It is recommended to assemble the chair on a soft, clean surface to prevent damage.

Muntatzeko urratsak:

1. Gurpilak oinarrira lotu: Insert each caster into the holes at the end of each leg of the five-star base. Push firmly until they click into place.
2. Txertatu gas-igogailua: Place the large end of the gas lift cylinder into the center hole of the assembled five-star base.
3. Lotu beso-euskarriak eserlekuari: Secure the armrests to the underside of the seat cushion using the provided screws. Ensure the armrests are oriented correctly (left and right).
4. Bizkarraldea eserlekuari lotu: Align the backrest with the seat cushion and secure it using the provided screws. Do not overtighten.
5. Mekanismoa eserlekuari lotu: Fasten the seat plate mechanism to the underside of the seat cushion, ensuring the front of the mechanism faces the front of the seat.
6. Konektatu eserlekuaren multzoa gas-igogailura: Jarri kontu handiz muntatutako eserlekua eta bizkarraldea gas-igogailuaren zilindroan, mekanismoaren erdiko zuloa gas-igogailuaren goiko aldearekin bat datorrela ziurtatuz. Sakatu ondo finkatzeko.

This image displays the Serta office chair in its fully assembled state, featuring black and grey upholstered sections, padded armrests, and a five-star base with casters.

2. Funtzionamendu-argibideak

Familiarize yourself with the chair's adjustable features to optimize your comfort and support.

Aulkiaren doikuntzak:

• Altuera doitzea: To raise the chair, lift the lever located on the right side of the seat while taking your weight off the seat. To lower the chair, lift the lever while seated. Release the lever at the desired height.
• Inklinazio/Kulunkatze funtzioa: Pull the same lever (on the right side) outwards to enable the rocking motion of the chair. Push the lever inwards to lock the chair in an upright position.
• Inklinazio-tentsioaren doikuntza: The round knob located underneath the front of the seat controls the tension of the tilt mechanism. Turn the knob clockwise to increase tilt tension (making it harder to recline) or counter-clockwise to decrease tension (making it easier to recline).

3. Mantentzea eta Zainketa

Regular maintenance helps prolong the life and appearance of your Serta office chair.

Garbiketa eta zaintza:

• Tapizeriaren garbiketa: For general cleaning, wipe the upholstered surfaces with a soft, damp cloth. For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild upholstery cleaner according to its instructions, testing on an inconspicuous area first.
• Markoa eta oinarria: Wipe metal and plastic parts with a soft, damp oihal. Saihestu garbitzaile urratzaileak.
• Loturak: Aldian-aldian egiaztatu torloju eta azkoin guztiak ondo estututa daudela ziurtatzeko. Beharrezkoa bada, berriro estutu egonkortasuna mantentzeko.
• Gurpilak: Keep casters free of hair and debris to ensure smooth rolling. Clean with a small brush or vacuum cleaner as needed.

4. Arazoak

Zure aulkiarekin arazorik baduzu, jo ezazu honako arazo eta irtenbide ohikoenei.

Arazo arruntak:

• Chair will not adjust height:
  • Ziurtatu altuera doitzeko palanka guztiz sartuta dagoela.
  • Check if the gas lift cylinder is properly seated in the base and mechanism.
• Aulkia kulunkatzen da edo ezegonkorra sentitzen da:
  • Verify that all assembly screws are securely tightened.
  • Ensure the casters are fully inserted into the base.
• Gurpilak ez dira ondo biratzen:
  • Egiaztatu gurpilak hondakinik ote dagoen (ilea, haria, etab.) eta garbitu itzazu ondo.
  • Ensure casters are correctly installed and not damaged.

5. Zehaztapenak

Key technical details and dimensions for the Serta Office Chair B076CKDB27.

• Modelo zenbakia: B076CKDB27
• Forma-faktorea: Tapiztua
• Beharrezkoa den muntaia: Bai
• Approximate Overall Height: 42 hazbetekoa
• Approximate Seat Width: 19.8 hazbetekoa
• Approximate Base Width: 25.8 hazbetekoa

This image illustrates the key dimensions of the Serta office chair. The overall height is approximately 42 inches, the seat width is 19.8 inches, and the width of the five-star base is 25.8 inches.

6. Bermearen informazioa

This Serta office chair is covered by a limited warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. Specific warranty terms and duration may vary. For detailed warranty information, please refer to the documentation included with your purchase or contact customer support.

7. Bezeroarentzako arreta

For further assistance, replacement parts, or any questions not covered in this manual, please contact Serta customer support. Contact details can typically be found on the product packaging or the official Serta webgunea.

Lineako laguntza: Visit the official Serta webmaiz egiten diren galderen eta laguntza-baliabideen gunea.

Telefono-laguntza: Refer to your product packaging for the customer service phone number.