True GDM-72F-HC~TSL01 Triple Swing Glass Door Merchandiser Freezer Instruction Manual

1. Sarrera

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your True GDM-72F-HC~TSL01 Triple Swing Glass Door Merchandiser Freezer. Please read this manual thoroughly before installation and operation to ensure proper usage and to prevent potential hazards.

The True GDM-72F-HC~TSL01 is a commercial-grade merchandiser freezer designed for displaying frozen food and ice cream. It features a self-contained capillary tube system utilizing environmentally friendly R290 hydrocarbon refrigerant, maintaining temperatures at -10°F (-23.3°C).

2. Segurtasun informazioa

Segurtasun-argibide garrantzitsuak:

• Deskonektatu beti energia mantentze-lan edo garbiketa egin aurretik.
• Ensure the unit is installed on a level, stable surface capable of supporting its weight.
• Mantendu aireztapen egokia unitatearen inguruan gehiegi berotzea saihesteko.
• Ez gorde substantzia lehergarririk (adibidez, aerosol latak, propultsatzaile sukoi batekin) aparatu honetan.
• Only qualified personnel should perform repairs or service on the refrigeration system.
• Keep all ventilation openings in the appliance enclosure or in the structure for building-in, clear of obstruction.

3. Produktuaren ezaugarriak

• High-quality construction for attractive display of frozen food and ice cream.
• Factory engineered, self-contained capillary tube system using R290 hydrocarbon refrigerant.
• Zero ozone depletion potential (ODP) and low global warming potential (GWP) refrigerant.
• Maintains consistent temperatures of -10°F (-23.3°C) for optimal frozen product storage.
• Triple pane thermal insulated glass door assemblies with white powder-coated frames.
• Twelve (12) adjustable, heavy-duty PVC coated wire shelves (24 1/8"L x 20 3/4"D).
• Produktuaren ikusgarritasun hobea lortzeko LED barne-argiztapena.
• Durable non-peel or chip black powder-coated cold rolled steel exterior.
• NSF approved white aluminum interior liner with stainless steel floor.
• Self-closing doors with positive seal, torsion-type closure system.
• Bottom-mounted unit design for maximized product visibility and easy condenser coil access.

4. Konfigurazioa eta instalazioa

4.1 Paketatzea

• Carefully remove all packaging materials, including any protective films or tapes.
• Egiaztatu unitatea bidalketa-kalterik dagoen. Jakinarazi berehala kalterik garraiolariari eta hornitzaileari.

4.2 Kokapena

• Place the freezer on a strong, level surface capable of supporting the unit's weight when fully loaded.
• Ensure adequate clearance around the unit for proper ventilation (minimum 6 inches from walls).
• Avoid direct sunlight, heat sources, or areas with high humidity.

4.3 Konexio elektrikoa

• Connect the unit to a dedicated electrical circuit with the correct voltage eta amperage as specified on the unit's data plate.
• Ez erabili luzapen-kablerik edo entxufe egokitzailerik.
• Ziurtatu lurra egokia deskarga elektrikoa saihesteko.

4.4 Hasierako abiaraztea

• After positioning and connecting power, allow the unit to sit for at least 2 hours before plugging it in. This allows refrigerants to settle.
• Plug in the unit. The compressor will start, and the interior lights will illuminate.
• Allow the unit to run empty for several hours (e.g., 4-6 hours) to reach its operating temperature before loading products.

5. Funtzionamendu-argibideak

5.1 Tenperatura Kontrola

• The freezer is factory-set to maintain approximately -10°F (-23.3°C).
• Refer to the digital temperature controller (if equipped) for specific adjustment instructions. Typically, adjustments involve pressing 'SET' and using arrow keys.

5.2 Produktuak kargatzea

• Load products evenly on the shelves. Do not block the air circulation vents inside the cabinet.
• Saihestu apalak beren pisu-ahalmena baino gehiago gainkargatzea.
• Ensure products do not obstruct the closing of the doors.

5.3 Atearen erabilera

• The doors are self-closing. Ensure they close completely after each use to maintain temperature and energy efficiency.
• Avoid leaving doors open for extended periods.

6. Mantentzea

6.1 Barnealdea garbitzea

• Deskonektatu energia garbitu aurretik.
• Use a mild soap and warm water solution to clean interior surfaces. Avoid abrasive cleaners.
• Wipe down shelves and interior walls regularly.
• Garbitu ur garbiz eta lehortu ondo.

6.2 Kanpoaldea garbitzea

• Wipe exterior surfaces with a soft cloth and mild detergent.
• Clean glass doors with a non-abrasive glass cleaner.

6.3 Kondentsadorearen bobina garbitzea

• The condenser coil is located at the bottom of the unit and should be cleaned regularly (monthly or quarterly, depending on environment).
• Deskonektatu energia.
• Kendu aurreko parrilla.
• Use a stiff brush or vacuum cleaner to remove dust and debris from the condenser fins.
• Replace the front grille and reconnect power.
• Oharra: A dirty condenser coil reduces efficiency and can lead to compressor failure.

6.4 Junten mantentze-lanak

• Inspect door gaskets regularly for tears or damage.
• Clean gaskets with warm water and mild soap to maintain their sealing properties.

7. Arazoak

Zerbitzuarekin harremanetan jarri aurretik, berriroview arazo eta irtenbide ohikoenak hauek dira:

8. Zehaztapenak

9. Bermea eta Laguntza

For warranty information, technical support, or service inquiries, please contact True Manufacturing directly or refer to the official True website. Keep your purchase receipt and model number handy when contacting support.

Fabrikatzailea: True Manufacturing

Eredua: GDM-72F-HC~TSL01