AMX 42" Under Cabinet Fluorescent Light Fixture

1. Sarrera

This manual provides detailed instructions for the installation, operation, and maintenance of your AMX 42" Under Cabinet Fluorescent Light Fixture, Model UC-42-WT. Please read this manual thoroughly before installation and retain it for future reference.

The AMX UC-42-WT is an energy-efficient fluorescent light fixture designed for under-cabinet applications, providing 4000K white light. It features a durable metal body, a polycarbonate lens, and convenient side and rear knockouts for wiring.

1.1. irudia: Aurrealdea view of the AMX 42" Under Cabinet Fluorescent Light Fixture.

2. Segurtasun informazioa

WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installing or servicing.

• Irakurri arretaz argibide guztiak instalatzen hasi aurretik.
• Ensure the electrical supply is disconnected before handling the fixture.
• All wiring connections must be made in accordance with local and national electrical codes. If you are unsure about wiring, consult a qualified electrician.
• Do not install this fixture near any heat source or in areas with excessive moisture.
• Aparailu hau barruko erabilerarako soilik diseinatuta dago.
• Ez gainditu zehaztutako wat-atage ordezko bonbiletarako.

3. Paketearen edukia

Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela:

• AMX 42" Under Cabinet Fluorescent Light Fixture (UC-42-WT)
• Diffuser (Shade)
• Remote Control (if included with specific model variant)
• Muntatzeko hardwarea (torlojuak, aingurak)
• Argibide eskuliburua

4. Zehaztapenak

Image 4.1: Product dimensions showing length, width, and height.

5. Instalazioa

5.1 Beharrezko tresnak

• Bihurkin bat (Phillips eta/edo punta laua)
• Zulatzeko broka egokiekin
• Wire strippers
• Arkatza
• Neurtzeko zinta
• Segurtasun betaurrekoak

5.2 Muntatzeko jarraibideak

1. Deskonektatu energia: Before starting, ensure the power supply to the installation area is turned off at the circuit breaker or fuse box.
2. Zehaztu muntaketa kokalekua: Choose a suitable location under the cabinet. Mark the desired mounting points for the fixture. Ensure the location allows for proper wiring access.
3. Prepare Wiring Access: The fixture features side and rear knockouts for wiring. Select the most appropriate knockout for your installation and carefully remove it.

   Image 5.1: Detail of side and rear knockouts for electrical wiring.

4. Gailu segurua: Using the provided mounting hardware, attach the fixture securely to the underside of the cabinet. Ensure it is level and firmly in place.
5. Hari-konexioak:
   • Konektatu beltza kablea aparatutik gailuaraino beroa (usually black) wire from the electrical supply.
   • Konektatu zuria kablea aparatutik gailuaraino neutroa (usually white) wire from the electrical supply.
   • Konektatu berdea edo kobrezko hari biluzi bat aparatutik gailuaraino lurra (usually green or bare copper) wire from the electrical supply.
   • Use appropriate wire connectors to secure all connections.
6. Install Diffuser: Snap the polycarbonate diffuser securely into place over the fluorescent tubes. No tools are required for this step.
7. Berrezarri boterea: Once all connections are secure and the fixture is assembled, restore power at the circuit breaker.

6. Funtzionamendua

The AMX UC-42-WT fluorescent light fixture is designed for straightforward operation.

6.1 Piztu/Itzaltzea

This fixture is typically controlled by a wall switch connected to the electrical circuit. Flip the wall switch to the "ON" position to illuminate the fixture and to the "OFF" position to turn it off.

If your model includes a remote control, refer to the remote control's specific instructions for pairing and operation. The remote control typically allows for power on/off and potentially dimming functions, depending on the model variant.

7. Mantentzea

Mantentze-lan erregularrak zure argiztapen-gailuaren errendimendu optimoa eta iraupen luzea bermatzen ditu.

7.1 Garbiketa

• Deskonektatu energia: Always turn off the power supply to the fixture before cleaning.
• Kanpoaldea: Garbitu gailuaren kanpoaldea zapi leun etaamp zapirik gabe. Saihestu garbitzaile, disolbatzaile edo leungarri urratzaileak erabiltzea, hauek akabera kaltetu baitezakete.
• Difusorea: The polycarbonate diffuser can be removed by gently unsnapping it. Clean it with mild soap and water, then rinse thoroughly and dry completely before reattaching.

7.2 Fluorescent Tube Replacement

When a fluorescent tube reaches the end of its life or fails, it will need to be replaced.

1. Deskonektatu energia: Turn off the power supply to the fixture at the circuit breaker.
2. Remove Diffuser: Gently unsnap and remove the polycarbonate diffuser.
3. Kendu hodi zaharra: Carefully twist the fluorescent tube 90 degrees and pull it out of its sockets.
4. Install New Tube: Insert the pins of the new G13 base fluorescent tube into the sockets and twist 90 degrees until it locks into place. Ensure the tube is rated for 26 Watts and 4000K color temperature for optimal performance.
5. Reattach Diffuser: Snap the diffuser back onto the fixture.
6. Berrezarri boterea: Turn the power back on at the circuit breaker and test the new tube.

Note: Dispose of old fluorescent tubes according to local regulations, as they may contain mercury.

8. Arazoak

If you encounter issues with your AMX light fixture, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, consult a qualified electrician or contact AMX customer support.

9. Bermea eta Laguntza

AMX products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your purchase or visit the official AMX webgunea. Gorde erosketa-agiria erosketaren frogagiri gisa berme-erreklamazioetarako.

For technical support, replacement parts, or further assistance, please contact AMX customer service through their official channels. Contact information can typically be found on the product packaging or the manufacturer's webgunea.