Eskuliburuak+

ATEN VE8950T

ATEN VE8950T 4K HDMI Over IP Transmitter

Erabiltzailearen eskuliburua

1. Sarrera

The ATEN VE8950T is a 4K HDMI Over IP Transmitter designed for extending 4K audio/video signals over a standard Gigabit Ethernet network. This device delivers visually lossless 4K AV signals with low latency, making it suitable for long-distance transmission in various professional environments. Its design focuses on ease of setup and operation, providing a scalable and flexible solution for multi-display 4K signal distribution.

The VE8950T offers an economical digital signage solution, addressing common challenges in AV over IP system implementation. Key benefits include limitless scalability, flexible deployment, simplified IP setup without the need for additional server PCs or software, and support for daisy-chaining to extend reach efficiently.

2. Ezaugarri nagusiak

3. Hardware deskribapena

3.1. Aurreko panela

ATEN VE8950T Front Panel with HDMI In, Audio In, IR, RS-232, and USB ports

1. irudia: Front Panel of the ATEN VE8950T Transmitter.

  • HDMI SARRERA: HDMI iturri gailura konektatzen da.
  • AUDIOA: 3.5 mm-ko jack audio-sarrera analogikorako.
  • IR: 3.5mm jack for IR receiver connection.
  • RS-232: Serial port for control and configuration.
  • USBa: USB Type B port for connecting to a computer or other USB host device.

3.2. Atzeko panela

ATEN VE8950T Rear Panel with LAN and DC5V power input

2. irudia: Rear Panel of the ATEN VE8950T Transmitter.

  • LAN: RJ-45 Ethernet ataka sare konexiorako.
  • DC5V: Power input jack for the 5V DC power adapter.

3.3. Goiko panela

ATEN VE8950T Top Panel with ID Number display, control buttons, Link and Power LEDs

3. irudia: Top Panel of the ATEN VE8950T Transmitter.

  • ID NUMBER Display: Three-digit LED display showing the device's ID.
  • +/- Botoiak: Used to adjust the device ID or navigate menu options.
  • LOTURA LED: Indicates network link status.
  • ENERGIA LED: Potentzia-egoera adierazten du.

4. Konfigurazioa eta instalazioa

Follow these steps to set up your ATEN VE8950T Transmitter:

  1. Itzali gailuak: Ensure all devices, including the HDMI source, display, and the VE8950T, are powered off before making any connections.
  2. Konektatu HDMI iturria: Use an HDMI cable to connect your HDMI source device (e.g., Blu-ray player, PC) to the HDMI SARRERA port on the VE8950T Transmitter.
  3. Sare-konexioa: Connect an Ethernet cable from your Gigabit network switch to the LAN port on the VE8950T Transmitter. Ensure the network switch supports Gigabit speeds.
  4. Potentzia-konexioa: Connect the provided 5V DC power adapter to the DC5V port on the VE8950T Transmitter, then plug the adapter into a power outlet.
  5. Piztu: Power on the VE8950T Transmitter. The BOTEREA LED should illuminate.
  6. Configure ID (Optional): If using multiple transmitters and receivers, configure the unique ID for each transmitter using the +/- buttons on the top panel. This ID must match the ID set on the corresponding receiver(s).
  7. Connect Receiver (Sold Separately): For a complete system, connect a compatible ATEN VE8950R Receiver (sold separately) to your display and the same network.
  8. Power On Source and Display: Power on your HDMI source device and the display.

For advanced configurations, including web GUI management and video wall setups, refer to the comprehensive user manual available on the ATEN webgunea.

5. Funtzionamendua

Once the VE8950T Transmitter and its corresponding receiver(s) are properly connected and powered on, the system will automatically begin transmitting the HDMI signal over the IP network.

6. Mantentzea

To ensure optimal performance and longevity of your ATEN VE8950T Transmitter, follow these maintenance guidelines:

7. Arazoak

If you encounter issues with your ATEN VE8950T Transmitter, refer to the following troubleshooting tips:

ArazoaKausa posibleaIrtenbidea
Ez dago bideo irteerarik pantailan.
  • Loose HDMI or Ethernet cables.
  • Incorrect ID setting on transmitter/receiver.
  • Botere arazoa.
  • Network connectivity problem.
  • Incompatible display resolution.
  • Egiaztatu eta berriro lotu kable-konexio guztiak.
  • Ensure the transmitter and receiver IDs match.
  • Verify the power adapter is connected and the POWER LED is on.
  • Check network switch status and cable integrity.
  • Ensure the display supports the output resolution from the source. Try a different source or display.
Bideoaren kalitate eskasa edo keinuka.
  • Low-quality HDMI or Ethernet cables.
  • Network bandwidth issues.
  • Interferentzia.
  • Use high-quality, certified HDMI and Cat 5e/6/6a cables.
  • Ensure the network switch is Gigabit and dedicated bandwidth is available. Avoid network congestion.
  • Relocate devices away from potential sources of electromagnetic interference.
Ezin da sartu Web GUI.
  • IP helbide okerra.
  • Network configuration issue.
  • Firewall blocking access.
  • Verify the device's IP address. Use a network scanner if unknown.
  • Ensure your computer is on the same subnet as the VE8950T.
  • Temporarily disable firewall on your computer to test access.

If the problem persists, please contact ATEN technical support for further assistance.

8. Zehaztapenak

Modelo zenbakiaVE8950T
Konektibitate TeknologiaHDMI, Ethernet (IP)
Bideo-kodeketaH.265
Max. Ebazpena4K (3840 x 2160) @ 60Hz (4:2:0), 4K (3840 x 2160) @ 30Hz (4:4:4)
Audio irteera moduaEstereoa, Inguratzailea
Inguruko Soinua5.1 Kanalaren konfigurazioa
HDMI portuak guztira1 (sarrera)
Kontrol-metodoaRemote (IR), RS-232, Web GUI
Produktuaren neurriak9.5 x 6.5 x 6.3 hazbete
Elementuaren pisua10.14 kilo

9. Bermea eta Laguntza

ATEN is committed to providing high-quality products and excellent customer service. For support regarding your VE8950T Transmitter, please refer to the following:

Bermeari buruzko informazio eguneratuena eta zehatzena lortzeko, bisitatu ATEN Official Store edo haien enpresaren webgunea.