Sarrera
This manual provides detailed instructions for the installation, operation, and maintenance of your Geekpure 5-Stage Reverse Osmosis Drinking Water Filter System. This system is designed to provide high-quality filtered water by reducing various contaminants down to 0.0001 micron, including arsenic, lead, fluoride, mercury, cadmium, and heavy metals, while also improving water taste and odor.
For optimal performance and longevity of your system, please read these instructions carefully before proceeding with installation or use.
Produktuaren osagaiak
The Geekpure 5-Stage Reverse Osmosis System includes the following main components:
- Main System Bracket with pre-filters and RO membrane housing
- Edateko uraren txorrota
- 2.8 litroko biltegiratze-tanga
- Sediment Filter (1st Stage)
- Granular Carbon Filter (2nd Stage)
- Carbon Block Filter (3rd Stage)
- RO Membrane (4th Stage)
- Post Carbon Filter (5th Stage)
- Feed Water Diverter Valve (for connecting to cold water line)
- Drain Saddle (for connecting to drain pipe)
- Deposituaren Bola Balbula
- Color-coded Tubing (1/4 inch and 3/8 inch)
- Konexio azkarreko osagarriak
- Housing Wrench (2)
- Fasteners/Clips
- Faucet Fittings
Figure 1: Complete list of parts included with the system.
Konfigurazioa eta Instalazioa
The Geekpure RO system is designed for under-sink installation and features quick connect fittings and color-coded tubing for a straightforward DIY experience. Basic plumbing knowledge and tools are recommended.
Instalazio aurreko egiaztapen-zerrenda:
- Uraren presioa: Ensure your feed water pressure is between 40 - 100 PSI.
- Tenperatura: Operating temperature should be 40-110°F (5-45°C).
- pH: Water pH should be between 3.0 - 11.0.
- TDS maximoa: Maximum Total Dissolved Solids (TDS) should not exceed 1000 PPM.
- Espazioa: Verify sufficient space under your sink for the main unit (14.2"L x 9.5"W x 18.1"H) and the 2.8-gallon storage tank.
Instalazio urratsak:
- Txorrota instalazioa:
Drill a hole (approximately 1.5 inches in diameter) on your countertop for the faucet. Ensure the hole is positioned conveniently. Secure the faucet using the provided base plate, rubber washer, plastic washer, lock washer, and nut. Use Teflon tape on threaded connections as instructed.
Figure 2: Faucet installation diagram, showing components and dimensions.
- Connect Feed Water:
Install the feed water diverter valve to your cold water line. Connect the appropriate color-coded tubing from the diverter valve to the system's inlet.
- Connect Drain Saddle:
Attach the drain saddle to the drain pipe under your sink. Connect the waste water tubing from the RO system to the drain saddle.
Figure 3: Main RO unit with drain water connection point highlighted.
- Install Filters and RO Membrane:
Ensure all filters (sediment, granular carbon, carbon block) are correctly seated in their housings. Install the RO membrane into its housing. Refer to the filter stage diagram for correct order.
Figure 4: Five stages of filtration and filter lifetimes.
- Biltegiratze-tanga konektatu:
Connect the storage tank to the system using the tank ball valve and appropriate tubing.
- Azken konexioak:
Connect the remaining color-coded tubing between the filter stages, RO membrane, and faucet as per the system diagram. Ensure all quick-connect fittings are pushed in completely and secured with blue locking clips.
- Ihesak egiaztatzea:
After completing all connections, slowly turn on the feed water. Carefully check all connections for leaks. It is recommended to wait until the entire system is pressurized (including the storage tank and faucet) and re-check for any leaks before leaving the installation site. Check again after a few hours, and then periodically for a few days to ensure no slow leaks develop.
5. irudia: Adibample of under-sink installation.
Funtzionamendu-argibideak
Initial System Flush:
After installation, the system requires an initial flush to remove any carbon fines and air from the filters. This is a critical step to ensure optimal water quality.
- Allow the storage tank to fill completely. This may take several hours depending on water pressure.
- Once the tank is full, open the RO faucet and allow all the water from the tank to drain completely.
- Repeat this process for a second tank fill and drain cycle. The first two tanks of water produced should be emptied and not consumed. It is normal for some black carbon fines to appear in the water during this initial flush.
- After the second flush, the system is ready for use.
Funtzionamendu normala:
The system operates automatically. When water is drawn from the faucet, the pressure in the storage tank drops, and the system begins to produce more filtered water to refill the tank. The RO process produces a small amount of wastewater, which is discharged through the drain line.
Figure 6: Wastewater ratio for the RO system.
Mantentzea
Regular maintenance, primarily filter replacement, is essential for the continued performance and water quality of your RO system. The replacement filters are universally compatible and standard size.
Iragazkiak ordezkatzeko egutegia:
- PP Sediment Filter (1st Stage): Replace every 6-12 months. Reduces silt, sand, dirt, and sediment.
- Granular Carbon Filter (2nd Stage): Replace every 6-12 months. Reduces chlorine, odors, and taste.
- Carbon Block Filter (3rd Stage): Replace every 6-12 months. Reduces chlorine, odors, and taste.
- RO Membrane (4th Stage): Replace every 15-20 months. Reduces total dissolved minerals.
- Post Carbon Filter (5th Stage): Replace every 12-15 months. Improves water for refined taste.
Note: Filter life may vary based on local water quality and usage.
Iragazkiak ordezkatzeko prozedura:
- Turn off the feed water supply to the RO system and close the tank ball valve.
- Open the RO faucet to relieve pressure in the system.
- Use the provided housing wrench to unscrew the filter housings.
- Kendu iragazki zaharrak eta bota itzazu behar bezala.
- Clean the inside of the filter housings.
- Insert new filters, ensuring O-rings are properly seated.
- Screw the housings back on tightly using the wrench. Do not overtighten.
- Slowly turn on the feed water supply and open the tank ball valve.
- Check for leaks. Flush the system as described in the "Initial System Flush" section if replacing multiple filters or the RO membrane.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Ur-ihesak | Loose fittings, improperly seated O-rings, damaged components. |
|
| No Water from Faucet / Very Slow Flow | Feed water supply off, tank valve closed, clogged filters, low water pressure, kinked tubing, air in system. |
|
| Poor Water Taste or Odor | Expired carbon filters, expired RO membrane, initial carbon fines. |
|
Zehaztapenak
- Ereduaren izena: RO5
- Sistemaren edukiera: 75 gallons per day (GPD) @ 60 psi
- Biltegiratze deposituaren edukiera: 2.8 litro
- Instalazio mota: Hondoratu azpian
- Produktuaren neurriak (unitate nagusia): 14.2"L x 9.5"Z x 18.1"A
- Elementuaren pisua: 23 libra (sistema osoa)
- Elikatzeko uraren presioa: 40 - 100 PSI
- Funtzionamendu-tenperatura: 40-110 °F (5-45 °C)
- pH tartea: 3.0 - 11.0
- TDS maximoa: 1000 PPM
- Hodiaren tamaina: 1/4 inches and 3/8 inches
- Energia iturria: Eskuzkoa (Uraren presioa)
- Ezaugarri berezia: Replacement filters are standard size for universal compatibility.
Figure 7: Reverse Osmosis Membrane with NSF certification details.
Bermea eta Laguntza
Geekpure products are manufactured with quality and reliability in mind. For specific warranty details regarding your 5-Stage Reverse Osmosis System, please refer to the warranty card included in your product packaging or contact Geekpure customer support directly.
For technical assistance, replacement parts, or any questions regarding your system, please visit the official Geekpure webwebgunean edo jarri harremanetan bezeroarentzako arreta-zerbitzuarekin. Harremanetarako informazioa normalean produktuaren ontzian edo markaren online presentzia ofizialean aurki daiteke.
Geekpure Store: Visit the Geekpure Store on Amazon
