MARATHON Slim Atomic Wall Clock with Full Calendar and Indoor/Outdoor Temperature

Sarrera

This manual provides comprehensive instructions for the setup, operation, and maintenance of your MARATHON Slim Atomic Wall Clock, Model CL030027-FD-WD. This digital clock features a large, easy-to-read display, full calendar, and monitors both indoor and outdoor temperatures. It utilizes atomic time synchronization for accurate timekeeping.

Produktua amaituview

The MARATHON CL030027-FD-WD is a versatile atomic wall clock designed for clear visibility and accurate information. Key features include:

• Large, Legible Display: 2-inch high digits for time, ensuring easy readability from a distance.
• Atomic Time Synchronization: Automatically sets and adjusts time using radio frequencies from NIST's Colorado Atomic Clock.
• Egutegi osoaren bistaratzea: Shows the day of the week, month, and date.
• Barruko/Kanpoko Tenperatura: Displays temperature in Celsius or Fahrenheit, with an included wireless outdoor sensor.
• Ordu-eremu anitz: Supports 8 different time zones with an option to manage Daylight Saving Time.
• Muntatzeko aukerak: Can be wall-mounted or displayed on a desktop using its built-in foldable stand.

Image: The MARATHON Slim Atomic Wall Clock displaying time, day, date, and indoor/outdoor temperatures, alongside its wireless outdoor sensor.

Paketearen edukia

Konfigurazioarekin jarraitu aurretik, ziurtatu elementu guztiak daudela:

• MARATHON Slim Atomic Wall Clock (Model CL030027-FD-WD)
• Haririk gabeko kanpoko tenperatura sentsorea
• 4 x AA Batteries (for clock and sensor)
• Argibide eskuliburua (dokumentu hau)

Konfigurazio Argibideak

1. Bateriaren instalazioa

1. For the Main Clock: Open the battery compartment on the back of the clock. Insert the specified AA batteries, observing the correct polarity (+/-).
2. Kanpoko sentsorearentzat: Open the battery compartment on the back of the wireless sensor. Insert the specified AA batteries, observing the correct polarity (+/-).
3. Close both battery compartments securely.

Note: It is recommended to insert batteries into the outdoor sensor first, then into the main clock, to ensure proper synchronization.

2. Initial Power-Up and Atomic Time Synchronization

Upon battery installation, the clock will automatically begin searching for the atomic time signal (WWVB) and the outdoor sensor signal. This process may take several minutes to several hours, depending on your location and environmental conditions.

• Place the clock near a window for better signal reception during initial setup.
• A signal icon (often resembling a radio tower or waves) will appear on the display when the atomic signal is being received.
• Once synchronized, the time, date, and day will automatically set.

Image: Illustration highlighting the self-setting feature of the clock upon battery insertion.

3. Outdoor Sensor Placement

For accurate outdoor temperature readings, position the wireless sensor in a sheltered location outside, away from direct sunlight and precipitation. Ensure it is within the transmission range of the main clock (typically up to 100 feet/30 meters, line of sight).

• Avoid placing the sensor near large metal objects or electrical appliances that may interfere with the signal.
• If the outdoor temperature does not display, press the "Sensor" or "Channel" button on the main clock (if available) to re-establish connection, or re-insert batteries in both units.

4. Muntatzeko aukerak

• Hormako muntaia: Use the integrated keyhole slots on the back of the clock to hang it on a screw or nail securely fastened to a wall.
• Desktop Display: Extend the built-in foldable stand on the back of the clock to place it on a flat surface.

Image: The clock highlighting its versatility with both wall-mount and built-in table stand options.

Funtzionamendu-argibideak

1. Setting Time Zone

After atomic synchronization, you may need to adjust the time zone. Locate the "TIME ZONE" or "ZONE" button on the back of the clock. Press this button repeatedly to cycle through the available 8 time zones until your local time zone is displayed.

2. 12/24 orduko formatuaren hautaketa

To switch between 12-hour (AM/PM) and 24-hour (military) time formats, locate the "12/24H" button on the back of the clock and press it once.

3. Temperature Unit Selection (Celsius/Fahrenheit)

To change the temperature display between Celsius (°C) and Fahrenheit (°F), locate the "°C/°F" button on the back of the clock and press it once.

4. Daylight Saving Time (DST) On/Off

The clock typically adjusts for DST automatically. However, if you reside in an area that does not observe DST, or if you wish to manually override this feature, locate the "DST" button on the back of the clock and press it to toggle the function on or off.

5. Manual Time Setting (If Atomic Sync is Unavailable)

In areas where the atomic signal is weak or unavailable, you can manually set the time and date:

1. Press and hold the "SET" or "MODE" button until the time display begins to flash.
2. Use the "+" or "-" buttons to adjust the flashing digit (e.g., hour, minute).
3. Press "SET" or "MODE" again to confirm the setting and move to the next adjustable parameter (e.g., minute, year, month, day).
4. Repeat until all desired settings are configured, then press "SET" or "MODE" one last time to exit manual setting mode.

Bistaratu informazioa

The clock's display is designed to provide all essential information at a glance:

• Ordua: Large digits display the current time (hours, minutes, seconds). AM/PM indicator for 12-hour format.
• Asteko eguna: Full day name (e.g., TUESDAY).
• Data: Month and day (e.g., JUL/30).
• Barruko tenperatura: Current temperature measured by the main clock unit.
• Kanpoko tenperatura: Current temperature received from the wireless outdoor sensor.
• Atomic Signal Indicator: Icon indicating successful atomic time synchronization.

Irudia: Xehetasun zehatza view of the clock's dynamic display, showing time, day, date, and both indoor and outdoor temperatures.

Mantentzea

• Garbiketa: Wipe the clock and sensor with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Bateria ordezkatzea: Replace all batteries in both the main clock and the outdoor sensor when the display becomes dim or unresponsive. Always replace with fresh, high-quality AA alkaline batteries.
• Ingurumen-baldintzak: Avoid exposing the clock to extreme temperatures, direct sunlight for prolonged periods, or high humidity. The outdoor sensor is weather-resistant but should be placed in a sheltered area.

Arazoak konpontzea

Zehaztapenak

Image: Diagram illustrating the dimensions of the MARATHON Slim Atomic Wall Clock.

Bermea eta Laguntza

For warranty information or technical support, please refer to the official MARATHON webwebgunera edo jarri harremanetan bezeroarentzako arreta-zerbitzuarekin. Gorde erosketa-agiria erosketaren frogagiri gisa.

Webgunea: www.marathonwatch.com