MOOER Mikro Aurrezamp M013 Matchbox Guitar Pedal Instruction Manual

1. Sarrera

MOOER Mikro Aurrebistaamp M013 Matchbox is a compact digital preamp pedal designed to accurately recreate the sound and feel of a Matchless amplifier. It features dual channels (Clean and Gain), a 3-band EQ, and an integrated cabinet simulator, making it suitable for direct recording, practice, or integration into a pedalboard setup.

2. Segurtasun informazioa

• Use only the specified 9V DC power adapter (center negative).
• Ez jarri unitatea uraren, hezetasunaren edo muturreko tenperaturen eraginpean.
• Saihestu pedala erortzea edo kolpe gogorren eraginpean jartzea.
• Ez saiatu unitatea desmuntatzen edo aldatzen.
• Mantendu haurren eskura.

3. Produktua amaitu daview

The M013 Matchbox pedal features a robust metal casing and intuitive controls for shaping your tone.

1. irudia: Goitik behera view of the MOOER Micro Preamp M013 Matchbox pedal, illustrating the layout of controls and jacks.

Kontrolak:

• VOL (Bolumena): Adjusts the overall output level of the selected channel.
• TRE (Treble): Maiztasun handiko erantzuna kontrolatzen du.
• MID (Middle): Maiztasun ertaineko erantzuna kontrolatzen du.
• BASS (Baxua): Maiztasun baxuko erantzuna kontrolatzen du.
• IRABAZIA: Adjusts the amount of overdrive/distortion for the selected channel.
• CH/CAB Switch: This toggle switch has two functions:
  • In normal operation, it switches between the Clean and Gain channels.
  • When holding down the footswitch, it toggles the cabinet simulator on/off.
• Oinen etengailua: Toggles between the two channels (Clean/Gain) or bypasses the pedal.

Konexioak:

Figure 2: Input Jack (left side)

Figure 3: Output Jack (right side)

Figure 4: DC 9V Power Input

• Sarrera Jack: Konektatu zure gitarra edo beste instrumentu bat hemen.
• Irteerako Jack: Konektatu zure ampargitzailea, nahasgailua edo audio interfazea.
• 9 V DC: Power input for a 9V DC (center negative) power supply.

4. Konfigurazioa

1. Konektatu zure gitarrara Sarrera Jack on the right side of the pedal.
2. Konektatu Irteera Jack on the left side of the pedal to your amplifier's input, a mixer, or an audio interface.
3. Connect a 9V DC (center negative) power adapter to the DC 9V sarrera.
4. Ziurtatu konexio guztiak ondo daudela piztu aurretik ampargitzailea edo audio sistema.

5. Funtzionamendu-argibideak

Kanalaren hautaketa:

The M013 Matchbox offers two distinct channels: Clean and Gain. Use the CH/CAB switch to toggle between these channels. The LED indicator will change color to show the active channel (typically blue for Clean, red for Gain).

Cabinet Simulator:

The integrated cabinet simulator can be toggled on or off. To activate or deactivate the cabinet simulator, press and hold the Footswitch for approximately 1 second. The LED will flash to indicate the change in status.

Tonu moldaketa:

Egokitu VOL, TRE, MID, BASS, eta IRABAZI knobs to achieve your desired tone for each channel. Experiment with different settings to explore the full range of sounds this pedal can produce.

Oin-etengailuaren funtzionaltasuna:

A quick press of the Footswitch will toggle between the currently selected channel and bypass mode. The LED will indicate whether the pedal is active or bypassed.

Erakustaldi bideoa:

6. Mantentzea

• Garbitu pedala zapi leun eta lehor batekin. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
• Store the pedal in a dry environment away from direct sunlight and extreme temperatures.
• Aldian-aldian egiaztatu kableen konexioak higadura edo hausturarik dagoen.

7. Arazoak

Potentziarik gabe:

• Ensure the 9V DC power adapter is correctly connected and functioning.
• Egiaztatu korronte hartunea aktibo dagoela.

Soinurik ez:

• Egiaztatu kable konexio guztiak (gitarra sarrerara, irteera sarrerara) amp/mixer).
• Ensure the pedal is not in bypass mode (check LED indicator).
• Verify that the volume knobs on the pedal and your amplifier are turned up.
• Ahal bada, probatu kable desberdinekin eta elikatze-iturri desberdin batekin.

Nahi gabeko zarata/burrunba:

• Ensure you are using a regulated 9V DC (center negative) power supply. Unregulated power supplies can introduce noise.
• Check for ground loops by trying different power outlets or isolating the pedal's power.
• Keep the pedal away from other electronic devices that may cause interference.

8. Zehaztapenak

• Elementuaren pisua: 5.8 ontza (165 gramo)
• Produktuaren neurriak: 3.58 x 1.26 x 1.42 hazbete
• Energia iturria: Kable elektrikoa
• liburukiatage: 9 Volts DC
• Irteera Wattage: 30 Watts (referring to the amp model it simulates, not the pedal's power output)
• Konektore mota: 6.35 mm-ko jaka
• Gailu bateragarriak: Gitarra
• Kolorea: Beltza

9. Bermea eta Laguntza

Bermeari buruzko informazioa eta laguntza teknikoa lortzeko, jo ezazu MOOER ofizialera. website or contact your local dealer. Keep your purchase receipt as proof of purchase for any warranty claims.