Sarrera
The Melnor XT Mini-Turbo Oscillating Sprinkler on a Spike is designed to provide efficient and flexible watering for your lawn and garden. This compact sprinkler offers advanced adjustability, allowing precise control over watering range, width, and flow, covering areas up to 3,900 sq. ft. Its durable spike design ensures stable placement in various landscapes.
Ezaugarri nagusiak hauek dira:
- Compact design with a metal spike for discreet placement.
- Smooth operating tabs for controlling watering pattern length (10 to 75 feet).
- Patented one-touch adjustment for watering pattern width (10 to 53 feet).
- Integrated flow control dial for micro-adjustment of water output.
- 360-degree rotation capability.
- Infinity Turbo Motor for consistent operation at varying water pressures.
Segurtasun Informazioa
Abisua: Produktu honek produktu kimikoen eraginpean jar dezake, besteak beste, beruna, Kaliforniako Estatuak minbizia eta jaiotza-akatsak edo ugalketa-kalte batzuk eragiten dituela eta estirenoa, Kaliforniako Estatuak minbizia eragiten duela ezagutzen duena. Informazio gehiago nahi izanez gero, joan www.P65Warnings.ca.gov. For outdoor use only.
Produktuaren osagaiak
Figure 1: Melnor XT Mini-Turbo Oscillating Sprinkler on a Spike, showing the main unit and spike.
Figure 2: Diagram illustrating the three main adjustment controls: Range, Width, and Flow, along with 360-degree adjustability.
3. irudia: Goikoa view of the sprinkler head showing the range and width adjustment tabs.
Konfigurazioa
- Unpack the Sprinkler: Carefully remove the sprinkler from its packaging. Inspect for any damage.
- Connect to Water Source: Attach a standard garden hose to the inlet connection at the base of the sprinkler. Ensure the connection is tight to prevent leaks. The sprinkler features a 0.75-inch inlet connection.
- Kokatu ihinztagailua: Insert the metal spike firmly into the ground in the desired watering area. Ensure the sprinkler head is level for optimal water distribution. The sturdy step-spike allows for easy and secure placement.
Funtzionamendu-argibideak
The Melnor XT Mini-Turbo Sprinkler offers precise control over your watering pattern. Refer to Figure 2 and Figure 3 for visual guidance on the controls.
1. Adjusting Watering Range (Length)
- Locate the smooth operating tabs on the sides of the sprinkler head (labeled '1' in Figure 2).
- Slide these tabs to set the desired length of the watering pattern. The range can be adjusted from 10 feet to up to 75 feet.
- You can also adjust the position of the pattern to water left, right, or center of the sprinkler.
2. Adjusting Watering Width
- Use the patented one-touch adjustment controls (labeled '2' in Figure 2) located on the top of the sprinkler.
- These controls allow you to set the watering width from as little as 10 feet to as much as 53 feet wide.
- Each side of the watering pattern can be adjusted independently for customized coverage.
3. Adjusting Flow Control
- The integrated flow control dial (labeled '3' in Figure 2) is located near the base of the sprinkler head.
- Rotate this dial to micro-adjust the water flow, optimizing your watering pattern and conserving water.
4. 360 graduko biraketa
- The sprinkler head can be rotated 360 degrees on its spike to direct water precisely where needed.
Mantentzea
- Iragazkien garbiketa: Periodically check the filter screen located at the hose connection inlet. If debris is present, disconnect the hose, remove the filter, rinse it thoroughly under running water, and reinsert it.
- Neguan egitea: Before the first frost, disconnect the sprinkler from the hose. Drain all water from the sprinkler to prevent freezing and potential damage. Store the sprinkler in a dry, protected area during winter months.
- Garbiketa orokorra: Wipe down the exterior of the sprinkler with a damp cloth to remove dirt and mineral deposits. Avoid using harsh chemicals that could damage the plastic components.
Arazoak konpontzea
- Spray eredu irregularra:
- Ensure the sprinkler is placed on level ground.
- Check for clogged nozzles on the sprinkler head. Use a small pin or needle to clear any blockages.
- Verify adequate water pressure from your hose.
- Low Water Pressure/Reduced Coverage:
- Check the filter screen at the hose connection for clogs (refer to Maintenance section).
- Ensure the water source (faucet) is fully open.
- Inspect the hose for kinks or leaks.
- Adjust the flow control dial to ensure it is not restricting water flow excessively.
- Sprinkler Not Oscillating:
- Ensure sufficient water pressure. The Infinity Turbo Motor requires a minimum pressure to operate correctly.
- Check for any obstructions around the oscillating mechanism.
Zehaztapenak
| Ezaugarri | Zehaztapena |
|---|---|
| Marka | Melnor |
| Modelo zenbakia | 4065 |
| Materiala | Plastikoa |
| Estiloa | 4 Way Ultimate Adjustment on Step-Spike |
| Produktuaren neurriak (L x W x H) | 2.75 x 4.92 x 14.17 hazbete |
| Elementuaren pisua | 1.11 kilo |
| Gehienezko Estaldura Eremua | Gehienez 3,900 sq. |
| Watering Range (Length) | 10 eta 75 oin artean |
| Watering Width | 10 eta 53 oin artean |
| Sarrerako konexioaren tamaina | 0.75 hazbete |
| Presio maximoa | 40 libra hazbete karratu bakoitzeko |
| Gehienezko Emaria | 500 litro minutuko |
| UPC | 042206040657 |
Bermea eta laguntza
This Melnor XT Mini-Turbo Oscillating Sprinkler is backed by a Melnor Lifetime Limited Warranty. Melnor is committed to the quality and performance of its products.
For any questions, feedback, or warranty claims, please refer to the official Melnor website or contact their customer support directly. Your experience with Melnor products is valued.
