Marshall MG10G-U Guitar Combo Ampbiziagoa

1. Sarrera

Welcome to the Marshall MG10G-U Guitar Combo Amplifier instruction manual. This document provides essential information for the safe and effective use of your new amplifier. Please read it thoroughly before operating the unit and retain it for future reference.

2. Segurtasun-argibide garrantzitsuak

• Irakurri argibide hauek.
• Jarrai argibide hauek.
• Kontuan izan abisu guztiei.
• Jarraitu argibide guztiak.
• Ez erabili aparatu hau uraren ondoan.
• Garbitu zapi lehorrekin bakarrik.
• Ez blokeatu aireztapen-zulorik. Instalatu fabrikatzailearen argibideen arabera.
• Ez instalatu bero-iturri inongo ondoan, esate baterako, erradiadoreak, bero-erregistroak, sukaldeak edo beste aparatu batzuk (barne ampberoa sortzen duten argitzaileak).
• Ez zapaldu polarizatutako edo lurreko entxufearen segurtasun-helburua. Entxufe polarizatu batek bi pala ditu, bata bestea baino zabalagoa dutenak. Lurreratze motako entxufe batek bi pala eta lurreko hirugarren ahoa ditu. Pala zabala edo hirugarren ahoa zure segurtasunerako eskaintzen dira. Emandako entxufea zure entxufean sartzen ez bada, kontsultatu elektrizista bati zaharkitutako entxufea ordezkatzeko.
• Babestu korronte-kablea entxufeetan, erosotasun-harguneetan eta aparatutik irteten den puntuan ibiltzetik edo atzamarra ez dadin.
• Erabili soilik fabrikatzaileak zehaztutako eranskinak/osagarriak.
• Deskonektatu aparatu hau tximista-ekaitzetan edo denbora luzez erabiltzen ez duzunean.
• Jarri zerbitzu-zerbitzu guztiak zerbitzu-pertsonal kualifikatuari. Zerbitzua behar da aparatua edozein modutan hondatu denean, hala nola, elikatze-kablea edo entxufea hondatuta dagoenean, likidoa isuri denean edo objektuak aparatura erori direnean, aparatua euria edo hezetasuna jasan duenean, ez du normalean funtzionatzen. , edo erori egin da.

3. Paketearen edukia

Mesedez, ziurtatu elementu guztiak kutxan daudela:

• Marshall MG10G-U Guitar Combo Ampbiziagoa
• Elikatze-kablea

4. Aurrealdeko panelaren kontrolak

The front panel of your MG10G-U amplifier provides all the necessary controls for shaping your sound.

1. irudia: Aurrealdea view of the Marshall MG10G-U Guitar Combo Ampbiziagoa.

2. irudia: hurbileko planoa view of the front panel controls, showing the input, volume, gain, and tone knobs.

• Sarrera: Connect your guitar here using a standard 1/4" instrument cable.
• BOLUMEN GARBIA: Adjusts the output level of the Clean channel.
• KANAL-ALDOA: Toggles between the Clean and Overdrive channels.
• IRABAZIA: Controls the amount of overdrive/distortion on the Overdrive channel. Higher settings produce more aggressive tones.
• OVERDRIVE BOLUMENA: Adjusts the output level of the Overdrive channel.
• INGURUA: This tone-shaping control allows you to sweep from a warm, mid-heavy tone to a scooped, modern sound.
• AURIKULAR IRTEERA: Connect headphones for silent practice. This output features speaker emulation for a realistic sound.
• SARRERA AUX: Connect an external audio device (e.g., MP3 player, phone) using a 3.5mm stereo cable to play along with your favorite tracks.
• POTENTZIA: Biratzen du amplifier ON edo OFF.

5. Atzeko panelaren konexioak

The rear panel houses the power input for the ampbiziagoa.

3. Irudia: Atzealdea view of the Marshall MG10G-U Guitar Combo Amplifier, showing the power input.

• ENERGIAREN SARRERA: Connect the supplied power cable here. Ensure the amplifier is switched off before connecting or disconnecting the power cable.

6. Konfigurazioa

Follow these steps to set up your Marshall MG10G-U ampbiziagoa:

1. Lekua: Jarri amplifier on a stable, flat surface. Ensure adequate ventilation around the unit.
2. Potentzia-konexioa: -rekin amplifier's POWER switch in the OFF position, connect the supplied power cable to the POWER INPUT on the rear panel and then to a suitable mains power outlet.
3. Gitarraren konexioa: Connect your guitar to the INPUT jack on the front panel using a high-quality instrument cable.
4. Hasierako ezarpenak: Turn all volume and gain controls to their minimum (zero) position before powering on.

7. Zure funtzionamendua Ampbiziagoa

Once set up, you can begin using your MG10G-U ampbiziagoa:

1. Piztu: Flip the POWER switch to the ON position. The power indicator light will illuminate.
2. Kanala garbia: Ensure the CHANNEL switch is in the 'Clean' position. Slowly increase the CLEAN VOLUME to your desired level.
3. Overdrive Channel: Press the CHANNEL switch to engage the 'Overdrive' channel. Adjust the GAIN knob for the desired amount of distortion, then use the OVERDRIVE VOLUME to set the output level.
4. Tonu moldaketa: Use the CONTOUR knob to adjust the overall tonal character of your sound. Experiment with different settings to find your preferred tone.
5. Sarrera Aux: To play along with music, connect your audio device to the AUX INPUT. The volume of the external device will control its level relative to your guitar.
6. Entzungailuak: For private practice, plug your headphones into the HEADPHONE OUTPUT. This will mute the ampbizitzailearen hizlaria.

8. Mantentzea

• Garbiketa: Mantendu amplifier clean by wiping it with a dry, lint-free cloth. Do not use liquid cleaners or solvents.
• Biltegiratzea: Erabiltzen ez duzunean, gorde amplifizer-a leku lehor eta fresko batean gorde, eguzki-argitik eta muturreko tenperaturetatik urrun.
• Manipulazioa: Always handle the ampKontuz ibili behar da lifagailua. Saihestu erortzea edo kolpe bortitzak jasatea.

9. Arazoak

If you encounter any issues, try these basic troubleshooting steps:

• Potentziarik gabe: Ziurtatu elikatze-kablea bi gailuetara ondo konektatuta dagoela amplifier and the wall outlet. Check the wall outlet with another device.
• Soinurik ez: Verify your guitar is properly connected. Check all volume controls (Clean Volume, Overdrive Volume, Guitar Volume) are turned up. Ensure headphones are not plugged in if you expect sound from the speaker.
• Distorted Sound (unexpected): Check your guitar cable for damage. Reduce the GAIN setting if on the Overdrive channel. Ensure your guitar's volume is not excessively high.

If problems persist, contact Marshall customer support.

10. Zehaztapenak

11. Bermea eta Laguntza

Your Marshall MG10G-U amplifier comes with a manufacturer's warranty. For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Marshall website. For technical support, service, or replacement parts, please contact Marshall customer service through their official channels.