1. Sarrera
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your ASTRALPOOL Aster 99 Sand Filter with Valve Ø 600. Please read these instructions thoroughly before attempting to install or operate the filter. Retain this manual for future reference.
1.1. Segurtasun informazioa
- Deskonektatu beti ponparen energia mantentze-lan edo zerbitzuren bat egin aurretik.
- Ziurtatu konexio guztiak ondo itxita eta iragazgaitzak direla ihesak saihesteko.
- Ez erabili iragazkia piezaren bat hondatuta edo falta bada.
- Keep children away from the filtration system during operation and maintenance.
- Instalaziorako, kontsultatu profesional kualifikatu bati urratsen bat zalantzan bazaude.
2. Produktua amaitu daview eta Osagaiak
The ASTRALPOOL Aster 99 Sand Filter is designed for efficient swimming pool water filtration. It consists of a durable filter tank and a multi-port valve that controls the water flow through the system.
1. irudia: ASTRALPOOL Aster 99 Sand Filter and Multi-port Valve. The image displays the main filter tank, which is a large, white, spherical unit, alongside a separate black multi-port valve with a handle, used for directing water flow.
2.1. Osagai nagusiak:
- Iragazki depositua: The main body where the filter media (sand) is contained.
- Multi-port Valve: Controls the operational modes of the filter (e.g., filter, backwash, rinse).
- Presio-neurgailua: Indicates the internal pressure of the filter, crucial for determining when backwashing is needed.
- Hustuketa tapoia: Located at the bottom of the tank for draining water.
3. Zehaztapenak
Understanding the dimensions and characteristics of your filter is important for proper installation and maintenance.
2. irudia: Dimensional diagram of the ASTRALPOOL Aster Sand Filter. This diagram illustrates the filter's height (H), diameter (D), and the positions of the inlet/outlet ports (M, N, K) with a corresponding table showing values for different filter sizes (Ø 500, 600, 750).
3.1. General Specifications for Ø 600 Model:
- Diametroa (D): 600 mm
- Altuera (H): 900 mm
- Port M (Height from base): 455 mm
- Port N (Height from base): 330 mm
- Port K (Connection Size): 1 1/2"
3.2. Additional Product Information:
- ASIN: B079L868QJ
- Lehen eskuragarri dagoen data: 29ko apirilaren 2025a
- Ordezko piezen erabilgarritasuna: Informazioa ez dago eskuragarri.
4. Konfigurazioa eta instalazioa
Proper installation is crucial for the filter's performance and longevity. Follow these steps carefully.
4.1. Gunearen hautaketa
- Place the filter on a firm, level surface, preferably concrete, to prevent settling.
- Ensure adequate ventilation and protection from direct sunlight and freezing temperatures.
- Allow sufficient space around the filter for maintenance and service.
4.2. Filling with Filter Media (Sand)
- Ensure the internal standpipe and laterals are properly assembled and secured.
- Place a plastic bag or cover over the standpipe opening to prevent sand from entering.
- Carefully pour the recommended amount and grade of filter sand into the tank.
- Remove the plastic bag/cover and ensure no sand has entered the standpipe.
4.3. Multi-port Valve Installation
- Carefully place the multi-port valve onto the filter tank, aligning the standpipe with the valve's opening.
- Secure the valve to the tank using the provided clamp or bolts, ensuring a tight seal.
- Connect the plumbing from the pump to the "PUMP" port on the valve.
- Connect the plumbing to the pool return lines to the "RETURN" port on the valve.
- Connect a waste line to the "WASTE" port on the valve, directing water to an appropriate drainage area.
- Install the pressure gauge into the designated port on the valve.
5. Funtzionamendu-argibideak
The multi-port valve controls the filter's functions. Always turn off the pump before changing the valve position to prevent damage.
5.1. Multi-port Valve Positions
- Iragazkia: Normal filtering mode. Water flows through the sand, is cleaned, and returned to the pool.
- Atzera-garbiketa: Cleans the filter sand. Water flows in reverse, flushing trapped debris out the waste line.
- GARBITU: Used after backwashing to settle the sand and flush any remaining dirty water to waste before returning to FILTER mode.
- HONDAKINAK/HUSTUKETA: Bypasses the filter, sending water directly from the pool to the waste line. Useful for vacuuming heavy debris or lowering pool water level.
- BIRKIRKULATU: Iragazkia saihestu eta ura zuzenean igerilekura itzuliz zirkulatzen du. Iragazkirik gabe produktu kimikoak banatzeko erabilgarria.
- ITXITA: Shuts off all flow to the filter. Use for servicing the pump or filter.
5.2. Initial Startup (First Backwash)
- Ensure the pool is filled to the proper level and all plumbing connections are secure.
- Set the multi-port valve to ATZEKO GARBITZEA.
- Turn on the pump. Backwash for 2-3 minutes, or until the water in the sight glass (if present) runs clear.
- Itzali ponpa.
- Set the multi-port valve to GARBITU.
- Piztu ponpa. Garbitu 30-60 segundoz.
- Itzali ponpa.
- Set the multi-port valve to IRAGAZKI.
- Turn on the pump. Note the initial pressure gauge reading; this is your clean filter pressure.
6. Mantentzea
Regular maintenance ensures optimal performance and extends the life of your filter.
6.1. Backwashing
Backwash the filter when the pressure gauge reading is 8-10 PSI (0.5-0.7 bar) above the clean filter pressure, or when pool water clarity decreases. Follow the steps outlined in "5.2. Initial Startup (First Backwash)" for each backwash cycle.
6.2. Negurako prestaketa (hala badagokio)
- Itzali ponpa eta deskonektatu korrontea.
- Set the multi-port valve to NEGUA (if available) or an intermediate position between two settings to relieve pressure on the gasket.
- Remove the drain plug at the bottom of the filter tank to completely drain all water.
- Disconnect all plumbing lines and store them in a dry, frost-free area.
- Remove the pressure gauge and store it indoors.
- Cover the filter to protect it from elements.
7. Arazoak
Atal honek zure harea-iragazkiarekin aurki ditzakezun arazo ohikoenei buruzkoa da.
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Ur-emari txikia / Presio handia | Clogged filter sand; pump strainer basket full; closed valve. | Backwash the filter; clean pump strainer basket; check valve position. |
| Igerilekuko ura lainotuta | Insufficient filtration time; dirty filter sand; improper chemical balance; damaged laterals. | Increase filtration time; backwash/rinse filter; test and adjust pool chemistry; inspect laterals for damage. |
| Balbulatik ura isurtzen | Worn spider gasket; loose connections. | Replace spider gasket; tighten connections. |
| Hondarra igerilekura itzultzen da | Damaged laterals; too much sand; improper sand grade. | Inspect and replace damaged laterals; ensure correct sand level and grade. |
8. Bermea eta Laguntza
Specific warranty details for the ASTRALPOOL Aster 99 Sand Filter with Valve Ø 600 are not provided within this manual. For warranty claims, technical support, or to inquire about spare parts, please contact your authorized ASTRALPOOL dealer or the manufacturer directly. Please have your product model and purchase date available when contacting support.
The ASIN for this product is B079L868QJ.
