TFA USB - Stick 30.3175 User Manual

Sarrera

This manual provides detailed instructions for the setup, operation, and maintenance of your TFA USB - Stick 30.3175. Please read this manual carefully before using the device to ensure proper functionality and to avoid damage.

Produktua amaituview

The TFA USB - Stick 30.3175 is a USB transceiver designed for use with specific TFA devices, enabling data transmission via radio frequency.

Figure 1: TFA USB Stick 30.3175. This image shows the compact, rectangular USB stick, light gray in color, with a standard USB-A connector at one end.

Figure 2: TFA Brand Logo. The logo features the letters "TFA" in bold blue uppercase, with a yellow curved shape behind the "A" and a registered trademark symbol.

Ezaugarri nagusiak:

• USB Transceiver functionality.
• Radio transmission at 868 MHz.
• Diseinu trinkoa eta arina.

Konfigurazioa

1. Sistemaren eskakizunak: Ensure your computer meets the necessary operating system requirements for the accompanying software (if applicable).
2. Softwarearen instalazioa: If your TFA device requires specific software for data logging or analysis, install it according to the software's instructions. This USB stick acts as a receiver for data from compatible TFA sensors.
3. Connect the USB Stick: Insert the TFA USB - Stick 30.3175 into an available USB port on your computer.
4. Gidariaren instalazioa: Your operating system may automatically install necessary drivers. If not, refer to the software's documentation for manual driver installation.

Funtzionamendua

The TFA USB - Stick 30.3175 functions as a receiver for data transmitted by compatible TFA devices. Its operation is primarily managed through the software associated with your TFA measurement device.

Bateragarritasuna:

This USB stick is suitable for use with the following TFA models:

• 35.1099.IT
• THERMOLOGGER.IT
• 35.1112.IT

For detailed instructions on how to receive and log data, please consult the user manual of your specific TFA measurement device (e.g., 35.1099.IT, THERMOLOGGER.IT, 35.1112.IT).

Mantentzea

The TFA USB - Stick 30.3175 requires minimal maintenance.

• Garbiketa: Use a soft, dry cloth to clean the exterior of the USB stick. Do not use liquid cleaners or solvents.
• Biltegiratzea: Gorde gailua leku fresko eta lehor batean, erabiltzen ez duzunean, eguzki-argitik eta muturreko tenperaturetatik babestuta.
• Manipulazioa: Saihestu gailua erortzea edo kolpe gogorren eraginpean jartzea.

Arazoak konpontzea

If you encounter issues with your TFA USB - Stick 30.3175, consider the following:

• Ez da gailua ezagutzen:
  • Try plugging the USB stick into a different USB port on your computer.
  • Berrabiarazi ordenagailua.
  • Ensure all necessary drivers are installed. Check your computer's Device Manager for any unrecognized devices.
• No Data Reception:
  • Verify that the compatible TFA measurement device is powered on and within range of the USB stick.
  • Check the settings in your TFA software to ensure it is configured to receive data from the correct sensor.
  • Ensure there are no significant obstructions (e.g., thick walls, large metal objects) between the sensor and the USB stick that could interfere with the 868 MHz radio signal.

For persistent issues, refer to the support section of the TFA webwebgunean edo jarri harremanetan bezeroarentzako zerbitzuarekin.

Zehaztapenak

Bermea eta Laguntza

For warranty information and technical support, please refer to the official TFA webwebgunera edo jarri harremanetan zure tokiko banatzailearekin. Gorde erosketa-agiria erosketaren frogagiri gisa.

TFA Dostmann GmbH & Co. KG
www.tfa-dostmann.de