Sarrera
This manual provides detailed instructions for the installation, operation, and maintenance of the Luceco LGIP44WTW-01 Infrared Motion Detector. This device is designed to automatically switch lighting on and off based on detected movement and ambient light levels, contributing to energy efficiency and enhanced security. It is suitable for both indoor and outdoor applications.
Segurtasun Informazioa
- Always disconnect the main power supply before attempting any installation, maintenance, or wiring work.
- Installation should only be carried out by a qualified electrician in accordance with local wiring regulations.
- Ensure the product is correctly earthed.
- Do not exceed the maximum load ratings for LED (300W) or AC (1200W) power.
- This product has an IP44 rating, making it suitable for outdoor use where it is protected against solid objects larger than 1mm and splashing water from any direction.
- Keep the sensor lens clean and free from obstructions to ensure proper operation.
Paketearen edukia
Paketeak normalean elementu hauek ditu:
- Luceco LGIP44WTW-01 Infrared Motion Detector
- Mounting screws and wall plugs (may vary)
- Argibide eskuliburua
Produktua amaituview
The Luceco LGIP44WTW-01 is a compact, white infrared motion detector featuring a tiltable sensor head for flexible positioning. It is designed to detect movement within its specified range and activate connected lighting. The unit is constructed from durable polycarbonate material.
1. irudia: Aurrealdea view of the Luceco LGIP44WTW-01 Infrared Motion Detector. This image shows the white, compact unit with its spherical, tiltable sensor at the bottom, designed to detect motion.
2. irudia: Aldea view of the Luceco LGIP44WTW-01 Infrared Motion Detector. This perspective highlights the tiltable mechanism of the sensor head and the wall-mount design.
Zehaztapenak
| Ezaugarri | Zehaztapena |
|---|---|
| Modelo zenbakia | LGIP44WTW-01 |
| Sarrera boltage | 220-240 V ~ 50/60 Hz |
| Max. AC Power Load | 1200W |
| Max. LED Power Load | 300W |
| Identifikazio Angelua | 180° |
| Identifikazio Distantzia | Gehienez 12 metro |
| Babes Klasea | IP44 |
| Denbora Atzerapena | 10 segundotik 7 minutura erregula daiteke |
| Materiala | Polikarbonatoa |
| Neurriak (L x W x H) | 7.4 x 9 x 10.2 cm |
| Pisua | 180 g |
| Aldatu estiloa | Mugimendu-sentsorea |
| Instalazio mota | Hormako Muntaia |
Instalazioa
1. Muntatzeko kokapena
Select a suitable mounting location that provides the desired coverage area for motion detection. Consider the following:
- Mount the detector at a height between 2.2 meters and 4 meters for optimal performance.
- Ensure there are no obstructions (e.g., large plants, furniture) that could block the sensor's field of view.
- Avoid mounting near heat sources (e.g., vents, air conditioning units, direct sunlight) or reflective surfaces, as these can cause false triggers.
- The 180° detection angle allows for wide coverage. Position the tiltable sensor head to focus on the primary area of interest.
3. irudia: Detection range diagram. This illustration shows the typical coverage area of the motion detector, indicating a detection distance of up to 6 meters and a recommended mounting height between 2.2m and 4m.
2. Kableatua
Abisua: Electrical installation should only be performed by a qualified electrician. Ensure power is disconnected at the mains before commencing any wiring work.
- Turn off the main power supply to the circuit where the detector will be installed.
- Kontu handiz ireki c-a.asing of the motion detector to access the wiring terminals.
- Connect the electrical wires according to the wiring diagram provided inside the unit or on the packaging. Typically, this involves connecting the Live (L), Neutral (N), and Switched Live (L') wires from your power supply and to the light fitting.
- Ziurtatu konexio guztiak seguru eta behar bezala isolatuta daudela.
- Itxi detektagailua casing securely, ensuring no wires are pinched.
- Berrezarri energia zirkuituan.
Funtzionamendua
Ezarpenak doitzea
The motion detector features adjustable controls for time delay and light sensitivity (LUX). These controls are typically located on the unit, often under a protective cover or on the sensor head itself.
- Denbora-atzerapena (DENBOROA): This knob adjusts how long the connected light remains on after motion is no longer detected. Rotate the knob to set the desired duration, ranging from approximately 10 seconds to 7 minutes.
- Argiarekiko sentikortasuna (LUX): This knob determines the ambient light level at which the detector becomes active.
- Biratu alderantz. eguzkiaren ikurra (gehienezko LUX) for day and night operation. The light will activate with motion regardless of ambient light.
- Biratu alderantz. ilargiaren sinboloa (LUX minutu) for night-only operation. The light will only activate with motion when the ambient light level falls below a certain threshold (i.e., it's dark).
After adjusting the settings, perform a test walk-through to ensure the detector operates as desired in your specific environment.
Mantentzea
- Periodically clean the sensor lens with a soft, dry, lint-free cloth to ensure optimal detection performance. Dust or dirt on the lens can reduce sensitivity.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the unit's surface or sensor.
- Regularly inspect the unit for any signs of physical damage or wear to the casing and wiring. If damage is found, disconnect power and consult a qualified electrician.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Light does not turn on with motion. | No power supply; incorrect wiring; LUX setting too high (daylight mode when it's dark); sensor obstructed; faulty bulb. | Check power supply and circuit breaker; verify wiring connections; adjust LUX setting towards the moon symbol for night operation; clear any obstructions from the sensor; check the connected light bulb. |
| Argia etengabe pizten da. | Constant motion in the detection area; time delay set too long; wiring error (e.g., switched live permanently connected); faulty unit. | Remove sources of constant motion; adjust time delay to a shorter duration; re-check wiring; if issue persists, contact support. |
| Light turns on randomly (false triggers). | Heat sources (e.g., vents, air conditioning, direct sunlight, car engines) within detection range; small animals; sensor too sensitive; strong electromagnetic interference. | Relocate detector away from heat sources; adjust sensor angle to exclude unwanted areas; if sensitivity is adjustable, reduce it; ensure proper grounding. |
| Detekzio-eremua laburregia edo ez-koherentea da. | Incorrect mounting height; sensor obstructed; extreme temperatures; sensor lens dirty. | Verify mounting height is within recommended range (2.2m-4m); clear obstructions; clean sensor lens; ensure operating temperature is within product specifications. |
Bermea eta Laguntza
Luceco products are manufactured to high standards and are designed for reliable performance. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Luceco website. In case of technical issues or if you require further assistance, please contact your retailer or Luceco customer support. Please retain your proof of purchase for any warranty claims.
