MPM MZP-01

MPM MZP-01 Vertical Garment Steamer Instruction Manual

Model: MZP-01 | Brand: MPM

Produktua amaituview

This steam brush is designed to eliminate wrinkles, deodorize, and disinfect all types of fabrics quickly and easily. It is ready for use in seconds. The long cable allows for comfortable movement across the fabric without annoying pulling. It can be used on all types of fabrics and garments without fear of damage. It also includes an accessory for delicate garments and another for thicker fabrics.

Ezaugarri nagusiak

Segurtasun-argibideak

Mesedez, irakurri arretaz segurtasun-argibide guztiak tresna erabili aurretik. Argibide hauek ez jarraitzen badituzu, deskarga elektrikoak, sua edo lesio larriak gerta daitezke.

Osagaiak

MPM MZP-01 Vertical Garment Steamer

Image showing the complete MPM MZP-01 Vertical Garment Steamer, highlighting its main body, water tank, and steam head.

MPM MZP-01 Steamer with steam emitting

Image of the MPM MZP-01 steamer in operation, with visible steam emanating from the steam head, demonstrating its function.

Hand holding MPM MZP-01 Steamer

Image showing a hand holding the MPM MZP-01 steamer, illustrating its ergonomic design and compact size for handheld use.

MPM MZP-01 Steamer with bristle brush attachment

Close-up image of the MPM MZP-01 steamer head with the bristle brush attachment installed, demonstrating one of the interchangeable accessories.

Osagaien zerrenda

Konfigurazioa

  1. Ensure the appliance is unplugged from the power outlet before beginning.
  2. Remove the water tank from the main unit by gently pulling it downwards.
  3. Open the water tank cap and fill with distilled or demineralized water up to the 'MAX' line (250 ml capacity). Do not overfill. Using tap water may lead to mineral buildup.
  4. Securely close the water tank cap and reattach the tank to the main unit, ensuring it clicks into place.
  5. Select the appropriate attachment (velvet brush for delicate fabrics, bristle brush for thicker fabrics) and securely attach it to the steam head if needed.
  6. Entxufatu kablea entxufe egoki batera (220 Volt).

Funtzionamendu-argibideak

Lurrunezko jantziak

  1. After plugging in, the steamer will begin to heat up. It is ready for use in approximately 30-45 seconds.
  2. Hang the garment on a hanger. For best results, pull the fabric taut with one hand while steaming with the other.
  3. Press and hold the steam button to release continuous steam. Move the steam head slowly over the fabric, from top to bottom.
  4. For stubborn wrinkles, pass the steam head over the area multiple times.
  5. Use the velvet brush for delicate materials like silk or satin. Use the bristle brush for heavier fabrics like wool or denim to help lift fibers and remove lint.
  6. Release the steam button to stop steaming.
  7. After steaming, allow the garment to cool and dry completely before wearing or storing.

Steaming Curtains and Upholstery

  1. Ensure curtains or upholstery are suitable for steam treatment. Test on an inconspicuous area first.
  2. Hold the steamer upright and move the steam head over the fabric, maintaining a slight distance.
  3. Do not over-saturate the fabric.

Mantentzea eta zaintzea

Garbiketa

  1. Deskonektatu beti lurrungailua eta utzi guztiz hozten garbitu aurretik.
  2. Hustu depositutik geratzen den ura.
  3. Garbitu lurrungailuaren kanpoaldea oihal leun eta lehor batekinamp oihal. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
  4. Clean the steam head regularly to prevent mineral buildup. Use a cotton swab or small brush to clear steam vents if necessary.

descaling

To maintain optimal performance and extend the life of your steamer, regular descaling is recommended, especially in areas with hard water.

  1. Nahastu %50eko ozpin zuriaren eta %50eko ur destilatuaren disoluzio bat.
  2. Pour the solution into the water tank up to the 'MAX' line.
  3. Plug in the steamer and allow it to heat up. Run the steamer until half of the solution has been used, directing steam into a sink or bucket.
  4. Unplug the steamer and let it cool for 30 minutes.
  5. Repeat the steaming process with the remaining solution.
  6. Empty the tank and rinse thoroughly with fresh distilled water. Fill with fresh distilled water and run the steamer until the tank is empty to flush out any remaining vinegar.

Biltegiratzea

Ensure the steamer is completely cool and dry before storing. Store in a cool, dry place, away from direct sunlight and moisture.

Arazoak konpontzea

ArazoaKausa posibleaIrtenbidea
Lurrunik ezUr depositua hutsikFill water tank with distilled or demineralized water.
Lurrunik ezSteamer not heatedAllow 30-45 seconds for the steamer to fully heat up.
Lurrunik ezSteam vents clogged with mineral buildupEgin kaltzioa kentzeko prozedura Mantentze-lanak atalean deskribatutako moduan.
Water spitting/leakingGehiegi betetako ur deposituaDo not fill past the 'MAX' line. Empty excess water.
Water spitting/leakingMineralen pilaketaKaltziogabetze prozedura burutu.
Water spitting/leakingSteamer not hot enoughAllow full heating time before use.
Poor wrinkle removalLurrun nahikorik ezEnsure water tank is full and steamer is fully heated. Press and hold steam button.
Poor wrinkle removalFabric not tautPull fabric taut while steaming to allow steam to penetrate effectively.

Zehaztapenak

Bermea eta Laguntza

For product support or inquiries, please refer to the retailer's customer service or the manufacturer's official webgunea. Bermearen xehetasun espezifikoak eskualdearen eta saltzailearen arabera alda daitezke.

This product is subject to the return policy of the retailer from which it was purchased. For purchases made on Amazon.com.be, a 30-day return policy applies for refunds or replacements, fulfilled by Amazon.

Erlazionatutako dokumentuak - MZP-01

Aurreview MPM LR-027-86 & LR-027-84 Fabric Shaver User Manual
User manual for the MPM LR-027-86 and LR-027-84 fabric shavers, providing instructions on safe usage, operation, cleaning, and maintenance.
Aurreview MPM MPM-216-CF Serieko Hozkailu/Izozkailuaren Erabiltzaile Eskuliburua
Eskuliburu honek MPM-216-CF-26, MPM-216-CF-27 eta MPM-216-CF-28 hozkailu/izozkailuetarako argibideak ematen ditu, segurtasunari, eguneroko erabilerari, instalazioari, arazoak konpontzeari eta mantentze-lanei buruzko informazioa emanez.
Aurreview Instrukcja Obsługi Płyty Indukcyjnej MPM-60-IM-15
Instrukcja obsługi dla płyty indukcyjnej MPM model MPM-60-IM-15, zawierająca informacje o montażu, użytkowaniu, bezpieczeństwie, konserwacji, rozwiązywaniu problemów, danych technicznych oraz warunkach gwarancji.
Aurreview MPM Chłodziarko-zamrażarka MPM-285-KB-31/E, MPM-285-KB-37/E, MPM-286-KB-34/E - Instrukcja Obsługi
Kompleksowa instrukcja obsługi dla chłodziarko-zamrażarek MPM modeli MPM-285-KB-31/E, MPM-285-KB-37/E, MPM-286-KB-34/E. Zawiera informacje o bezpieczeństwie, instalacji, codziennym użytkowaniu, pielęgnacji, czyszczeniu, rozwiązywaniu problemów i danych technicznych.
Aurreview MPM-20-KMT-04 Mikrovlnná trouba: Návod k obsluze a bezpečnostní pokyny
Kompletní návod k obsluze pro mikrovlnnou troubu MPM-20-KMT-04. Obsahuje důležité bezpečnostní pokyny, informace o instalaci, čištění, provozu a údržbě.
Aurreview Instrukcja obsługi MPM-375-FR-53, MPM-375-FR-54
Instrukcja obsługi dla chłodziarko-zamrażarki MPM Total No Frost, modele MPM-375-FR-53 i MPM-375-FR-54. Zawiera informacje o bezpieczeństwie, instalacji, użytkowaniu i konserwacji.