Feit Electric BR40 Dimmable LED Floodlight User Manual

Sarrera

Thank you for choosing the Feit Electric BR40 Dimmable LED Floodlight. This energy-efficient LED bulb is designed to replace traditional 75-watt incandescent floodlights, consuming only 11.8 watts while providing 1065 lumens of soft white 2700K light. It is suitable for various indoor applications, including track lighting and recessed fixtures, offering a wide 110-degree beam spread. With a lifespan of up to 15,000 hours, this ENERGY STAR qualified bulb is built for long-lasting performance and significant energy savings.

Irudia: Aurrealdea view of the Feit Electric BR40 Dimmable LED Floodlight 2-pack packaging, highlighting its LED, dimmable, flood, 1065 lumens, 11.8 watts, 15,000 life hours, and 75W replacement features.

Segurtasun Informazioa

OHARRA:

• Gailu honek FCC Arauen 15. zatia betetzen du. Funtzionamendua bi baldintza hauen menpe dago: (1) Gailu honek ez du interferentzia kaltegarririk eragin, eta (2) gailu honek jasotako edozein interferentzia onartu behar du, nahi ez den funtzionamendua eragin dezakeen interferentziak barne.
• This equipment has been tested and found to comply with the limits for a Class B digital device. It generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications.
• Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.

KONTUZ:

• Use only on 120 volt, 60Hz circuits.
• Egokia damp kokapenak.
• Minimum operating temperature: -25°C (-13°F).
• Gailu hau ez da larrialdietarako irteeretarako aparatuekin edo larrialdietarako argiekin erabiltzeko pentsatuta.
• Lamp may not be compatible with all dimmers. For dimmer compatibility information, visit www.feit.com or call 1-866-329-BULB.
• When installing or replacing, ensure that power is switched off at the circuit breaker before connecting or disconnecting to the fixture.

Irudia: Atzealdea view of the Feit Electric BR40 Dimmable LED Floodlight packaging, showing detailed specifications, warranty information, and safety warnings.

Konfigurazioa eta Instalazioa

1. Itzali: Before beginning installation, ensure the power to the light fixture is switched off at the circuit breaker to prevent electrical shock.
2. Kendu bonbilla zaharra: Carefully unscrew and remove the existing bulb from the fixture. Allow the old bulb to cool if it has been recently in use.
3. Install New LED Bulb: Screw the Feit Electric BR40 Dimmable LED Floodlight into the standard E26 medium screw base socket until it is finger-tight. Do not overtighten.
4. Berrezarri boterea: Once the bulb is securely installed, restore power at the circuit breaker.
5. Aplikazioa: This BR40 floodlight is designed for track lighting and recessed applications, providing a wide beam of light.

Irudia: Albokoa view of the Feit Electric BR40 Dimmable LED Floodlight packaging, illustrating its wide light distribution and suitability for track and recessed applications.

Funtzionamendu-argibideak

The Feit Electric BR40 LED Floodlight is designed for simple operation in compatible fixtures.

• Eragiketa estandarra: Once installed and power is restored, the bulb will illuminate when the light switch is turned on.
• Dimmable funtzionaltasuna: This LED bulb is dimmable. For optimal performance and to avoid flickering or buzzing, use with LED-compatible dimmer switches. If you experience issues with your current dimmer, consult www.feit.com for a list of compatible dimmers or contact customer support.
• Barruko erabilera: This bulb is intended for indoor use in dry or damp kokapenak.

Mantentzea

Feit Electric LED bulbs require minimal maintenance due to their long lifespan and durable design.

• Garbiketa: Ziurtatu argindarra itzalita dagoela garbitu aurretik. Garbitu bonbilla zapi leun eta lehor batekin. Ez erabili garbitzaile likidorik edo material urratzailerik.
• Ordezkoa: Replace the bulb only after it has cooled down completely.
• Xedapena: Dispose of LED bulbs according to local regulations for electronic waste.

Arazoak konpontzea

If you encounter issues with your Feit Electric BR40 LED Floodlight, consider the following:

• Bonbilla ez pizten:
  1. Ziurtatu bonbilla ondo torlojututa dagoela entxufean.
  2. Check if the power switch is on and the circuit breaker has not tripped.
  3. Probatu bonbilla beste lanpara batean, funtzionatzen duela ezagutzen den batean.
• Dardara edo burrunba:
  1. This often indicates incompatibility with the dimmer switch. Ensure you are using an LED-compatible dimmer.
  2. Bisitatu www.feit.com for a list of recommended dimmers or contact customer support.
• Radio or TV Interference:
  1. If the bulb causes interference, try reorienting or relocating the receiving antenna.
  2. Increase the separation between the light fixture and the affected receiver.
  3. Connect the light fixture to an outlet on a different circuit from the receiver.
  4. Consult a dealer or an experienced radio/TV technician for further assistance.

Zehaztapenak

Bermea eta Laguntza

Bermea: This Feit Electric LED lamp comes with a 5-year, free replacement warranty. If the product fails or you are not satisfied with its performance, please contact Feit Electric directly. This replacement is the sole remedy available, and liability for incidental or consequential damage is expressly excluded.

Harremanetarako informazioa:

• Webgunea: www.feit.com
• Posta elektronikoa: info@feit.com
• Doako Zenbakia: 1-866-329-BULB (1-866-329-2852)

Fabrikatzailea:
Feit konpainia elektrikoa
Pico Rivera, CA 90660
Txinan egina