DROK 200350 Timer Relay User Manual

1. Bukatu daview

This manual provides detailed instructions for the DROK 5V/12V/24V Time Delay Relay Switch, Model 200350. This versatile module features an LCD display for clear parameter viewing and supports various timing modes for diverse applications. It is designed for precise control of electrical circuits based on time delays or cycles.

2. Produktuaren ezaugarriak

Independent Parameters: OP (On-time), CL (Off-time), and LOP (Loop count) parameters can be modified and saved independently for each mode.
Gorde automatikoa: All configured parameters are automatically saved and retained even after power loss.
LCD pantaila: Equipped with an LCD screen to clearly show the current operating mode and set parameters.
Micro USB Power Supply: Supports 5V power input via Micro USB for convenience.

3. Produktua amaitu daview eta Osagaiak

The DROK Timer Relay module features clearly labeled components for easy identification and connection.

DROK Timer Relay with labeled components — **1. irudia:** DROK Timer Relay with key components labeled, including power input, trigger inputs, relay outputs, Micro USB port, LCD display, and control buttons (STOP, SET, UP, DOWN).

Osagai nagusiak honako hauek dira:

Power Supply Terminals: For 6.0V-30V DC input.
Micro USB 5.0V Power Supply: Alternative 5V power input.
High/Low Level Trigger Inputs: Kanpoko kontrol-seinaleetarako.
Relay Output Terminals (NC, COM, NO): Normally Closed, Common, Normally Open contacts for controlling external loads.
LCD pantaila: Shows current mode and timing parameters.
Control Buttons (STOP, SET, UP, DOWN): Used for mode selection and parameter adjustment.
Relay Closing Indicator: LED that illuminates when the relay is active.

4. Zehaztapenak

Zehaztapena	Balioa
Modelo zenbakia	200350
Marka	DROK
Energia hornidura boltage	5V (Micro USB) / 6V-30V DC
Egungo balorazioa	5 Amps
Kommutazio-korronte maximoa	5 Amps
Gehienezko kommutazio boltage	30 Volt
Gutxieneko Aldaketa Voltage	3 Volt
Kontaktu mota	Normalean irekita
Denbora tartea	0.01 segundotik 9999 minutura
Neurriak	80 mm x 39 mm (gutxi gorabehera 3.15 x 1.54 hazbete)
Funtzionamendu-tenperatura	Gehienez 85 gradu Celsius

Dimensions of the DROK Timer Relay module — **2. irudia:** Physical dimensions of the DROK Timer Relay module.

5. Konfigurazioa eta kableatzea

Proper wiring is crucial for the safe and correct operation of the timer relay. Ensure all connections are secure before applying power.

5.1 Elikatze-horniduraren konexioa

The module can be powered by either a Micro USB 5V supply or a 6V-30V DC supply connected to the screw terminals. Do not connect both simultaneously.

Close-up of Micro USB port for 5V power supply — **3. irudia:** Mikro USB ataka 5V-ko potentzia sarrerarako.

Close-up of power supply terminals for 6V-30V DC input — **4. irudia:** Screw terminals for 6V-30V DC power input.

5.2 Karga-kableatzea

The relay provides Normally Open (NO), Common (COM), and Normally Closed (NC) contacts. Connect your load to the appropriate terminals based on your application's requirements.

Wiring diagram for weak current control of a strong current load — **5. irudia:** Wiring diagram for controlling a strong current load (e.g., 220VAC) with the relay using a weak current trigger.

Weak Current Control Strong Current Wiring: As shown in Figure 5, the relay can switch a high-voltage/high-current load (e.g., 220VAC) using the relay contacts, while the module itself is powered by a low-voltage DC supply. The load's power source is separate from the module's power source.

Wiring diagram for sharing one power supply between the module and the load — **6. irudia:** Wiring diagram for sharing a single power supply between the module and the load.

Sharing One Power Supply Wiring: As shown in Figure 6, if the load operates on the same voltage as the module's power supply (6V-30V DC), you can use a single power source for both the module and the load, connecting the load through the relay contacts.

6. Funtzionamendu-argibideak

The DROK Timer Relay offers multiple operating modes and adjustable parameters. This section details how to navigate and configure these settings.

6.1 Parametroak ezartzea

Parametroak ezartzeko modura sartzeko, sakatu eta eutsi botoiari EZARTU button for 3 seconds. The display will show the current mode (e.g., P1.1). Use the UP eta BEHERA buttons to select the desired mode. Once a mode is selected, press EZARTU briefly to cycle through its parameters (OP, CL, LOP). Use UP eta BEHERA to adjust the values. To change the decimal point position (for seconds, milliseconds, etc.), press the GELDITU button while adjusting the time parameter.

Close-up of the LCD display showing mode and parameters — **7. irudia:** LCD display showing the current mode and parameters.

Close-up of the control buttons (STOP, SET, UP, DOWN) — **8. irudia:** Control buttons for setting modes and parameters.

6.2 Funtzionamendu moduak

The module supports seven distinct operating modes (P1-P7), each designed for specific timing applications.

1. bideoa: A detailed explanation of the DROK 200350 Timer Relay's operating modes and parameter setting process. This video demonstrates how to navigate through the different modes (P1-P7) and adjust their respective timing parameters (OP, CL, LOP) using the control buttons.

P1 (Time Delay On): Upon receiving a trigger, the relay activates (OP time) and then deactivates (CL time). Multiple triggers during the cycle have no effect.
P2 (Time Delay On with Reset): Similar to P1, but a new trigger received during the cycle will reset the timer and restart the cycle.
P3 (Time Delay On/Off with Stop): Similar to P1, but a subsequent trigger during the cycle will immediately stop the current cycle.
P4 (Delay then Open): This mode involves two parameters: CL (time to wait before the cycle starts) and OP (duration of the cycle after the delay). Intermittent triggers during the delay or active cycle have no effect.
P5 (Delay then Open with Loop): Similar to P4, but includes an additional parameter, LOP (Loop count), which specifies how many times the CL-OP sequence should repeat after the initial trigger.
P6 (Power-On Trigger): Similar to P5, but the cycle automatically begins upon power-on, without requiring an external trigger. This mode is useful for applications that need to start immediately when power is supplied.
P7 (Hold Open on Trigger): Upon receiving a trigger, the relay remains active (open) for as long as the trigger signal is held. Once the trigger is released, the relay will remain active for a specified OP time before deactivating. This mode has only one parameter: OP.

7. Mantentzea

The DROK Timer Relay is designed for durability and requires minimal maintenance. To ensure optimal performance and longevity:

Mantendu modulua garbi eta hautsik eta hezetasunik gabe.
Saihestu modulua muturreko tenperaturetara edo eguzki-argitara zuzenean jartzea.
Ensure all wiring connections remain tight and secure.
Ez gainditu zehaztutako bolumenatage and current ratings for the power supply and relay contacts.

8. Arazoak

If you encounter issues with your DROK Timer Relay, consider the following troubleshooting steps:

Pantailarik ez/Energiarik ez: Check the power supply connections and ensure the voltage is within the specified range (5V via Micro USB or 6V-30V DC). Verify the power source is functioning correctly.
Relay Not Activating: Confirm the trigger input is correctly connected and providing the expected signal (high or low level). Check the selected operating mode and its parameters (OP, CL, LOP) to ensure they are configured as intended.
Denbora okerra: Review the OP, CL, and LOP parameters for the selected mode. Ensure the decimal point is set correctly for seconds, milliseconds, or minutes.
Ustekabeko portaera: Reset the module to factory defaults (if available, consult specific product documentation for reset procedures) and reconfigure the desired mode and parameters. Verify external wiring for any shorts or loose connections.

9. Bermea eta Laguntza

Bermeari buruzko informazioa eta laguntza teknikoa lortzeko, jo DROK ofizialera. website or contact their customer service. Specific warranty terms and conditions may vary.

	DROK 300473 12V-ko atzerapen digitaleko tenporizadore errele modulua - Parametroak, ezaugarriak eta ezarpenak DROK 300473 12V-ko atzerapen-tenporizadore digitaleko errele-moduluari buruzko informazio zehatza, produktuaren parametroak, ezaugarriak, funtzioak (P-1etik P-4ra bitarteko moduak) eta denbora-kontrol zehatza egiteko ezarpen-argibideak barne hartzen dituena.
	DROK Tenporizadore Erreleboa 200350: Ezaugarri Teknikoak, Moduak eta Funtzionamendua DROK 200350 tenporizadore errelearen gida osoa, moduluaren deskribapena, zehaztapen teknikoak, zazpi lan moduak (P1-P7), denbora tartearen hautaketa, kableatu diagramak, UART komunikazioa eta parametroak ezartzeko prozedurak zehaztuz.
	Drok SKU:200088 Denbora-errele modulua - Ezaugarri teknikoak eta funtzioak Drok SKU:200088 denbora-errele moduluaren zehaztapen tekniko zehatzak, ezaugarriak eta 18 funtzionamendu-funtzio. Kontrol elektronikoaren parametroak, erabilera-murrizketak eta funtzionamendu-argibideak barne hartzen ditu.
	DROK 2001711005 Tenporizadore Digitalaren Errele Modulua: Argibideak eta Zehaztapenak DROK 2001711005 errele-tenporizadore digitaleko modulurako argibide zehatzak, parametroen ezarpenak eta kableatu-gida. Ikasi denbora, lan moduak eta potentzia-ezarpenak nola konfiguratu.
	DROK 200399 Timer Relay: Features, Specifications, and Operation Guide A comprehensive guide to the DROK 200399 Timer Relay, detailing its module description, key parameters, seven working modes (P1-P7), timing range selection, wiring diagrams, remote data functions, and parameter setting procedures. Includes features like sleep mode and one-button stop.
	DROK DC-DC Buck Converter 12A Adjustable Power Supply Module with LCD Display Detailed technical specifications and application guide for the DROK DC-DC Buck Converter module (SKU: 2001711007). This 12A adjustable power supply features an LCD display, constant voltage (CV) and constant current (CC) modes, suitable for use as a buck-boost module, battery charger, or LED driver. Includes operating instructions, parameters, and safety precautions.

DROK 200350