Notifier DVC-EM Digital Voice Command Alarm System User Manual

1. Sarrera

The Notifier DVC-EM (Digital Voice Command with Extended Memory) is a critical component designed to integrate with compatible fire alarm and emergency communication systems. This module provides advanced digital voice command capabilities, enhancing the system's ability to deliver clear and effective audio messages during emergency situations. It is engineered for reliable performance within a comprehensive safety and security infrastructure.

2. Segurtasun informazioa

Please read and understand all safety instructions before installing or operating the DVC-EM module. This device is part of a life safety system and must be installed and maintained by qualified personnel in accordance with all local and national electrical codes and standards. Failure to follow these instructions may result in property damage, serious injury, or death.

• Segurtasun elektrikoa: Disconnect all power sources before installation or servicing to prevent electrical shock.
• Bateriaren maneiua: If applicable, use only specified battery types. Dispose of batteries according to local regulations.
• Instalazio profesionala: Installation and configuration of this module should only be performed by trained and certified fire alarm technicians.
• Sistemaren bateragarritasuna: Ensure the DVC-EM is compatible with your existing fire alarm control panel and other system components.

3. Paketearen edukia

Upon opening the package, verify that all components are present and undamaged. The standard package for the Notifier DVC-EM includes:

• One (1) Notifier DVC-EM Digital Voice Command module.
• Associated mounting hardware (if applicable, check specific product documentation).

The Notifier DVC-EM module is typically shipped in a protective cardboard box, as shown. Ensure the packaging is intact upon arrival.

The Notifier DVC-EM module, a circuit board component, is protected within an anti-static bag to prevent damage during transit and handling. Handle with care.

4. Konfigurazioa eta instalazioa

The Notifier DVC-EM module is designed for screw-in, wall-mount installation and operates wirelessly with battery power. Due to its integration into critical safety systems, professional installation is highly recommended.

4.1 Muntaketa

1. Aukeratu kokapena: Choose a suitable wall location within the specified range of the main alarm panel, ensuring it is free from obstructions and environmental extremes.
2. Muntaketa segurua: Use appropriate screws and anchors to securely mount the DVC-EM module to the wall. Refer to the detailed installation diagrams in the full technical manual for precise mounting points.

4.2 Energia-konexioa

1. Bateriaren instalazioa: Install the required batteries (type not specified in product data, refer to device labeling or full manual) into the designated battery compartment. Ensure correct polarity.
2. Pizteko sekuentzia: Follow the specific power-up sequence outlined in the main system's installation manual to integrate the DVC-EM module.

4.3 Haririk gabeko konexioa

The DVC-EM utilizes wireless connectivity. Ensure the module is within the operational range of the main alarm system for proper communication. Configuration of wireless settings typically occurs via the main alarm control panel interface.

Hurbilago bat view of the Notifier DVC-EM module, still sealed in its protective anti-static packaging, highlighting its electronic components prior to installation.

5. Funtzionamendu-argibideak

The Notifier DVC-EM functions as a Digital Voice Command unit, primarily controlled via voice commands and integrated with the main alarm system. It is designed to issue alerts based on motion detection.

5.1 Voice Command Activation

The DVC-EM responds to pre-programmed voice commands issued through the connected alarm system. Specific commands and their functions are detailed in the main alarm system's user manual. Typically, these commands are used to:

• Initiate emergency messages.
• Broadcast pre-recorded instructions.
• Control specific zones or functions of the alarm system.

5.2 Motion-Activated Alerts

The DVC-EM is equipped with a photoelectric sensor for motion detection. When motion is detected within its operational range (up to 100 ft), the module can trigger an alert, which may include an 85dB alarm sound, depending on system configuration. The system's response to motion detection is configurable via the main control panel.

6. Mantentzea

Regular maintenance ensures the optimal performance and longevity of your Notifier DVC-EM module. Perform these checks periodically:

• Bateria egiaztatzea: As a battery-powered device, regularly check the battery status. Replace batteries as indicated by the main alarm system's low battery warnings or as recommended by the manufacturer.
• Garbiketa: Gently clean the exterior of the module with a soft, dry cloth to remove dust and debris. Do not use liquid cleaners or solvents. Ensure the photoelectric sensor is clear of obstructions.
• Sistemaren proba: Periodically test the entire alarm system, including the DVC-EM's voice command and motion detection functions, according to the main system's testing procedures.

7. Arazoak

If you encounter issues with your Notifier DVC-EM, consider the following troubleshooting steps. For complex problems, contact a qualified fire alarm technician.

• Argindarrik ez/Erantzunik ez: Check battery installation and charge level. Ensure the module is properly connected to the main system.
• Voice Commands Not Recognized: Verify that the DVC-EM is within wireless range of the main control panel. Check the main system's configuration for voice command settings.
• Mugimendu faltsuen alertak: Ensure the photoelectric sensor is clean and free from obstructions. Review the installation location for potential sources of false triggers (e.g., drafts, direct sunlight, moving objects).
• No Alarm Sound: Confirm the 85dB alarm function is enabled in the main system's configuration. Check for any system faults reported by the main control panel.

8. Zehaztapenak

9. Bermearen informazioa

Specific warranty details for the Notifier DVC-EM module are not provided in the available product information. Please refer to the official Notifier webwebgunera edo jarri harremanetan bezeroarentzako arreta-zerbitzuarekin bermearen baldintza orokorrak lortzeko.

10. Laguntza

For technical assistance, product inquiries, or support regarding your Notifier DVC-EM Digital Voice Command module, please contact Notifier's dedicated customer service team. They are equipped to help with any questions regarding products and orders.

Harremanetarako informazioa: Refer to the official Notifier webgunea (www.notifier.com) for the most current support contact details, including phone numbers and email addresses.