1. Sarrera
This manual provides essential information for the safe and efficient operation of your Behringer NX1000 Ultra-Lightweight 1000W Class-D Power Amplifier. Please read this manual thoroughly before using the product to ensure proper setup, usage, and maintenance.
Aurrealdea view of the Behringer NX1000 ampbizitzailea, erakustaldiaasinbere diseinu trinkoa eta aurrealdeko paneleko kontrolak direla eta.
2. Zer dago kutxan
Egiaztatu osagai guztiak daudela paketea desontziratzean:
- Behringer NX1000 Ultra-Lightweight 1000-Watt Class-D Power Ampbiziagoa
- Elikatze-kablea
- Argibide eskuliburua (dokumentu hau)
3. Ezaugarri nagusiak
- Delivers 2 x 500 watts into 2 ohms; 2 x 300 watts into 4 ohms; 1000 watts into 4 ohms (Bridge mode) and weighs less than 7.3 lbs/ 3.3 kg.
- Ultimate reliability through revolutionary cool-running high-density Class-D technology with "near-zero" Thermal buildup.
- Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption.
- Built-in stereo crossover with low-cut, high-cut and full range Mode.
- SmartSense loudspeaker Impedance compensation features fully Linear frequency response at any speaker load Impedance.
An efficiency graph illustrating the superior performance of Class-D technology compared to Class-AB, showing higher efficiency across various output power levels.
A frequency response graph demonstrating the linear output achieved by SmartSense loudspeaker impedance compensation, ensuring consistent sound quality regardless of speaker load.
4. Konfigurazioa
Proper setup is crucial for optimal performance and safety. Follow these guidelines for connecting your ampbiziagoa:
4.1. Rack Muntatzea
The NX1000 is designed for standard 19-inch rack mounting. Secure the amplifier using appropriate rack screws through the rack ears on both sides of the unit.
Aldeko profile of the Behringer NX1000 amplifier, highlighting its rack-mountable chassis.
4.2. Audio konexioak
Konektatu zure audio iturria (nahasgailua, aurrebista)ampbizigarria, etab.) -ri amplifier's input jacks. The NX1000 supports both XLR and 1/4-inch TRS connectors for balanced input signals.
Connect your passive loudspeakers to the amplifier's output terminals. The NX1000 provides both speakON and binding post outputs for flexible speaker connectivity.
Xehetasuna view of the rear panel, showing input and output connectors for audio signals and speakers.
4.3. Energia-konexioa
Connect the supplied power cable to the AC inlet on the rear panel of the amplifier and then to a suitable power outlet.
4.4. Konfigurazio bideo gida
A step-by-step guide on how to set up D Series amplifiers, covering speaker connections, input sources, and mode selection for various audio configurations.
5. Funtzionamendua Ampbiziagoa
5.1. Piztu/Itzaltzea
Sakatu BOTEREA aurrealdeko paneleko etengailua pizteko amplifier on or off. The BOTEREA LED will illuminate when the unit is active.
Close-up of the power button, indicating its location on the front panel.
5.2. Bolumen kontrolak
Egokitu A KANALA eta B KANALA gain knobs on the front panel to set the desired output volume for each channel. The LCD display will show the decibel levels for precise adjustment.
5.3. Modu hautaketa
On the rear panel, use the MODUA switch to select between STEREO, ZUBITU, edo PARALELOA operation, depending on your speaker configuration requirements.
- STEREO: Each channel operates independently, providing separate left and right audio signals.
- BRIDGED: Combines the power of both channels into a single, high-power output, ideal for driving a single subwoofer.
- PARALELOA: Sends the same mono signal to both channels, useful for driving multiple speakers with identical audio.
5.4. Gurutzaketa ezarpenak
Utilize the built-in stereo crossover with low-cut, high-cut, and full-range modes to optimize the frequency response for your specific speakers or subwoofers.
5.5. LED adierazleak
The front panel features several LED indicators:
- PRO (Protect): Pizten da baldin eta amplifier enters protection mode due to overload, overheating, or short-circuit.
- MUGA: Indicates that the output signal is approaching clipping. Reduce the input level to prevent distortion.
- SEINALEA: Lights up when an audio signal is present on the respective channel.
- POTENTZIA: Adierazten du ampargitzailea piztuta dago.
5.6. Produktua amaitu daview Bideoa
Bat baino gehiagoview video demonstrating the features and connectivity options of the D Series power amplifiers, including front panel controls, input/output configurations, and operational modes.
6. Mantentzea
Zure iraupena eta errendimendu optimoa ziurtatzeko amplifier-a, jarraitu mantentze-aholku hauek:
- Mantendu unitatea garbi zapi leun eta lehor batekin garbituz. Saihestu garbitzaile edo disolbatzaile urratzaileak erabiltzea.
- Ziurtatu aireztapen egokia inguruan amplifier to prevent overheating. Do not block the ventilation grilles.
- Regularly check all cable connections for secure fit and signs of wear.
7. Arazoak
If you encounter issues with your Behringer NX1000 ampbizigarri gisa, jo ezazu honako arazo eta irtenbide ohiko hauetara:
- Soinu-irteerarik ez:
- Check all audio input and output connections.
- Ziurtatu amplifier is powered on and the POWER LED is illuminated.
- Verify that input sources are active and sending a signal.
- Adjust channel gain knobs and master volume on your mixer/preamp.
- Soinu distortsionatua:
- Check if the LIMIT LED is illuminated; reduce input level if it is.
- Ziurtatu bozgorailuen inpedantzia bat datorrela amplifier-en gaitasunak.
- Inspect speaker cables for damage or incorrect wiring.
- Amplifier Enters Protect Mode (PRO LED illuminated):
- Itzali amplifijadorea eta deskonektatu bozgorailu guztiak.
- Check for short circuits in speaker cables or faulty speakers.
- Ensure proper ventilation to prevent overheating. Allow the unit to cool down.
- Verify that the speaker load impedance is within the amplifier's specified range (e.g., not below 2 ohms per channel).
- Haizagailuaren zarata gehiegi:
- Ziurtatu amplifier has sufficient airflow and is not in an enclosed space.
- Clean any dust buildup from the fan and ventilation grilles.
8. Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Ereduaren izena | NX1000 |
| Potentzia irteera (2 ohmios) | 2 x 500 watt |
| Potentzia irteera (4 ohmios) | 2 x 300 watt |
| Power Output (4 Ohms Bridged) | 1000 Watt |
| Pisua | 7.3 lb / 3.3 kg |
| Amplifier Klase | D klasea |
| Loudspeaker Impedance Compensation | SmartSense |
| Crossover | Built-in stereo (low-cut, high-cut, full range) |
| Elikatze Hornidura | Ultra-efficient switch-mode |
| Produktuaren neurriak | 19.02 x 9.09 x 3.7 hazbete |
| Konektibitate Teknologia | Kableatua |
| Audio irteera modua | Estereoa |
| Zirkuitu kopurua | 2 |
9. Bermea eta laguntza
The Behringer NX1000 amplifier bat dator Berme mugatua. For detailed warranty information, product support, or service inquiries, please visit the official Behringer webgunera edo jarri harremanetan zuzenean bezeroarentzako arreta-zerbitzuarekin.
Always refer to the manufacturer's official resources for the most accurate and up-to-date information regarding your product.
