Luceco Solar Guardian PIR Floodlight 10W-ko erabiltzailearen eskuliburua

Sarrera

Thank you for choosing the Luceco Solar Guardian PIR Floodlight. This solar-powered LED floodlight is designed to provide efficient and reliable outdoor illumination with the added security of a Passive Infrared (PIR) motion sensor. Its robust IP65 rating ensures durability against weather and dust, making it ideal for various outdoor applications such as pathways, gardens, and driveways. This manual provides essential information for the safe installation, operation, and maintenance of your floodlight.

Segurtasun Informazioa

• Irakurri arretaz argibide guztiak instalatu eta martxan jarri aurretik.
• Ensure the mounting surface is structurally sound and can support the weight of the floodlight.
• Do not attempt to disassemble or modify the product. This will void the warranty and may cause damage or injury.
• Keep the product away from flammable materials and extreme heat sources.
• The product contains Lithium Ion batteries. Do not expose batteries to fire or extreme temperatures. Dispose of batteries according to local regulations.
• Avoid looking directly into the LED light source when illuminated, as it may cause eye strain or damage.
• This product is IP65 rated for outdoor use, meaning it is protected against dust ingress and low-pressure water jets. However, do not submerge the unit in water.

Paketearen edukia

Mesedez, markatu laukitxoa elementu hauetarako:

• Luceco Solar Guardian PIR Floodlight Unit (10 Watts)
• Euskarria muntatzea
• Fixings (screws and wall plugs)
• Erabiltzailearen eskuliburua (dokumentu hau)

Produktua amaituview

Familiarize yourself with the main components of your Luceco Solar Guardian PIR Floodlight:

• Eguzki-panela: Located on top, converts sunlight into electricity to charge the internal battery.
• LED matrizea: The main light source, providing 1080 lumens of illumination.
• PIR mugimendu sentsorea: Detects movement to activate the light.
• Kontrol-botoiak: Located on the unit, used to select operating modes and adjust settings.
• Muntatzeko euskarria: Adjustable bracket for secure wall mounting.

Konfigurazioa eta Instalazioa

Follow these steps for optimal performance and secure installation:

1. Aukeratu kokapena: Select a mounting location that receives direct sunlight for at least 6-8 hours daily to ensure the solar panel can fully charge the battery. The location should also be suitable for the desired light coverage and PIR detection area. Avoid areas under eaves, trees, or other obstructions that might block sunlight or trigger the sensor unnecessarily.
2. Markatu zulatzeko puntuak: Hold the mounting bracket against the desired surface and mark the positions for drilling holes.
3. Zulatzeko zuloak: Drill holes at the marked positions. A drill bit size of 6mm-7mm is generally suitable for the provided wall plugs, though some users have found an 8mm bit to be too large. Always test with a smaller bit first if unsure.
4. Txertatu hormako tapoiak: Sartu hormako tapoiak zulatutako zuloetan.
5. Muntatzeko euskarri segurua: Lotu muntatzeko euskarria horman emandako torlojuak erabiliz. Ziurtatu ondo finkatuta dagoela.
6. Attach Floodlight: Slide the floodlight unit onto the mounting bracket and secure it with the retaining screws.
7. Egokitu Angelua: Adjust the angle of the solar panel to maximize sun exposure and the angle of the light head to direct illumination where needed. Ensure the PIR sensor is facing the area you wish to monitor.

Funtzionamendu-argibideak

Your Luceco Solar Guardian PIR Floodlight offers various operating modes to suit your needs. The control buttons are typically located on the unit itself. It is recommended to set the desired mode before final installation if the unit will be out of easy reach.

Hasierako karga:

Before first use, allow the floodlight to charge in direct sunlight for at least 24-48 hours with the unit switched off. This ensures the internal Lithium Ion battery reaches full capacity for optimal performance.

Eragiketa moduak:

The floodlight typically features multiple modes, selectable via the control buttons:

• Mode 1 (On/Off): A basic switch to turn the unit completely on or off. Useful for initial charging or when the light is not needed.
• Mode 2 (Dusk-to-Dawn Sensor): The light will automatically turn on at a lower brightness when it gets dark and turn off at dawn. This mode does not typically use the PIR sensor for activation, but rather ambient light levels. The duration of illumination in this mode depends on the battery charge and ambient light conditions.
• Mode 3 (Security Mode - PIR Activated with Dim Light): The light remains at a dim brightness after dark. When motion is detected by the PIR sensor, the light will switch to full brightness for a set duration (e.g., 20 seconds), then return to dim brightness.
• Mode 4 (Motion Activated - Full Brightness): The light remains off after dark. When motion is detected by the PIR sensor, the light will switch to full brightness for a set duration (e.g., 30 seconds), then turn off completely until motion is detected again. This mode is designed for maximum energy saving and security.

Refer to the specific markings on your unit for exact button functions and mode indicators.

PIR Sensor Adjustment:

Some models may allow adjustment of the PIR sensor's sensitivity and detection range. If available, use the dedicated adjustment dials or buttons to fine-tune the sensor to prevent false triggers (e.g., from swaying bushes) or to ensure it covers the desired area effectively.

Mantentzea

Regular maintenance ensures the longevity and optimal performance of your floodlight:

• Eguzki-panela garbitzea: Aldian-aldian garbitu eguzki-panela zapi leun batekin,amp cloth to remove dust, dirt, leaves, or snow. A clean solar panel ensures maximum sunlight absorption and efficient battery charging.
• Cleaning the PIR Sensor: Ensure the PIR sensor lens is clean and free from obstructions to maintain accurate motion detection.
• Bateria zaintzea: The integrated Lithium Ion batteries are designed for long life. To maximize battery lifespan, ensure the unit receives adequate sunlight for charging, especially during winter months when daylight hours are shorter. Avoid prolonged periods of storage with a completely depleted battery.
• Check Mountings: Periodically check that the mounting screws and bracket are secure, especially after strong winds or adverse weather conditions.

Arazoak konpontzea

If you encounter issues with your floodlight, try the following solutions:

Zehaztapenak

Modelo zenbakia	LEXSF11B40-01
Energia iturria	Eguzki-energia
Wattage	10 Watt
Argi Fluxua	1080 lumen
Bonbilla mota	LED
liburukiatage	3.7 Volt
Pilak	4 litio ioizko bateriak (barne)
IP balorazioa	IP65 (Weather and Dust Proof)
Materiala	Aluminioa
Kolorea	Beltza
Produktuaren neurriak	8.46 x 11.81 x 1.38 cm
Elementuaren pisua	1.37 kg
Ezaugarri bereziak	Waterproof, PIR Motion Sensor

Bermea eta Laguntza

Luceco offers a 3 urteko bermea on the Solar Guardian PIR Floodlight. This warranty covers defects in materials and workmanship under normal use.

For technical support, warranty claims, or any questions regarding your product, please contact the Luceco dedicated technical support team. You can typically find contact information on the Luceco official webgunea edo zure dendariaren laguntza-kanalen bidez.

Gorde erosketaren egiaztagiria bermearen ondorioetarako.