1. Sarrera
The SmartGen BACM2420 is an intelligent and multifunctional battery charger specifically designed for lead-acid motor starter batteries. It supports both 24V and 12V battery systems and provides a maximum charging current of 20A. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your BACM2420 charger.
2. Segurtasun informazioa
Kargagailua erabili aurretik, irakurri eta ulertu segurtasun-jarraibide guztiak. Jarraibide hauek ez jarraitzen badituzu, deskarga elektrikoak, suteak edo lesio larriak gerta daitezke.
- Irakurri argibideak: Always read the entire instruction manual before using the charger.
- Aireztapena: Kargagailuaren inguruan aireztapen egokia ziurtatu funtzionamenduan zehar, gehiegi berotzea saihesteko.
- Hezetasuna: Do not expose the charger to rain, moisture, or excessive humidity. Operate in a dry environment.
- Lurreratzea: Connect the charger to a properly grounded electrical outlet.
- Deskonektatu energia: Always disconnect the AC power supply before making or breaking any connections to the charger or battery.
- Begietako babesa: Wear appropriate eye protection when working with batteries.
- Haurrak: Kargagailua eta bateriak haurren eskura ez dauden lekuetan eduki.
- Bateria mota: This charger is designed for lead-acid batteries only. Do not attempt to charge other battery types.
3. Produktuaren ezaugarriak
The SmartGen BACM2420 battery charger incorporates several advanced features for optimal performance and battery longevity:
- Intelligent and multifunctional design for lead-acid motor starter batteries.
- Compatible with 24V or 12V battery systems (configurable).
- Maximum charging current of 20A.
- Switching power structure with a wide AC input range: 100-277VAC, 50/60Hz.
- Compact size, lightweight, and high efficiency.
- User-selectable automatic two-stage edo hiru-stage charging process to prevent overcharging and extend battery life.
- Built-in Power Factor Correction (PFC) circuit, achieving a power factor greater than 0.99.
- Denbora errealeko bateria boltage detekzioa.
- Bolumen baxuatage output port: Provides a low-level output when battery voltage falls below a preset value for a specified delay.
- Temperature sensor port: Allows for real-time battery temperature monitoring and compensation, preventing excessive battery temperature.
- Failure port: Provides a low-level output when the AC input is interrupted.
- Standard RS485 communication port for remote monitoring and control.
- LED display for charging status: Green light indicates 'FULL CHARGED', Red light indicates 'CHARGING'.
4. Zehaztapenak
| Parametroa | Balioa |
|---|---|
| Marka | SmartGen |
| Eredua | BACM2420 |
| Sarrera boltage | 100-277 VAC, 50/60 Hz |
| Korronte nominatua | 20 Amps |
| Irteera boltage | 24V (Configurable for 12V) |
| Bateria mota | Berun Azidoa |
| Potentzia-faktorea | >0.99 (with PFC) |
| Produktuaren neurriak | 26.5 x 15.6 x 6.8 cm |
| Elementuaren pisua | 2.2 kilogramo |
5. Konfigurazioa
Careful installation is crucial for the safe and reliable operation of the BACM2420 charger.
5.1 Produktua gainditzeaview
5.2 Muntaketa
Mount the charger in a secure, dry, and well-ventilated location. Ensure there is sufficient space around the unit for air circulation. Use appropriate fasteners for the mounting surface.
5.3 Kableatutako konexioak
Refer to Figure 1 for terminal locations. Ensure all connections are secure and correctly polarized before applying power.
- AC Input (L, P, N): Connect the AC power supply to the 'L' (Live), 'P' (Protective Earth/Ground), and 'N' (Neutral) terminals. Ensure the protective earth connection is properly made.
- DC Output (B-, B+): Connect the negative terminal of the battery to 'B-' and the positive terminal of the battery to 'B+'. Observe correct polarity to prevent damage.
- RS485 Communication (A, B): Connect your RS485 communication cable to the 'A' and 'B' terminals for remote monitoring and control.
- Temperature Sensor (T+, T-): If using a temperature sensor (optional), connect it to the 'T+' and 'T-' terminals. This enables temperature compensation for optimized charging.
- Vol. Baxuatage Output (LO): This terminal provides a low-level output when the battery voltage drops below a configured threshold.
- Failure Output (LO): This terminal provides a low-level output when the AC input power is interrupted.
5.4 12V/24V Configuration
The BACM2420 charger is factory-set for 24V operation. It can be configured for 12V battery systems. Refer to the detailed configuration instructions in the full technical manual or contact SmartGen support for specific steps on changing this setting.
6. Funtzionamendu-argibideak
Once properly installed and connected, operating the BACM2420 is straightforward.
- Konektatu bateria: Ensure the battery is correctly connected to the DC output terminals (B- and B+).
- Apply AC Power: Connect the charger to a suitable AC power source (100-277VAC, 50/60Hz).
- Kargatzeko prozesua: The charger will automatically begin the charging process. The 'CHARGING' (red) LED indicator will illuminate.
- Karga osoa adieraztea: Once the battery is fully charged, the 'FULL CHARGED' (green) LED indicator will illuminate, and the charger will switch to a maintenance charge mode to prevent overcharging.
- S kargatzentages: The charger automatically selects between a two-stage edo hiru-stage charging process based on user configuration and battery condition to optimize charging and extend battery life.
7. Mantentzea
Regular maintenance helps ensure the longevity and optimal performance of your charger.
- Garbiketa: Kargagailua garbi eta hautsik eta hondakinik gabe mantendu. Erabili zapi lehor eta leun bat garbitzeko. Ez erabili garbitzaile likidorik.
- Konexioak: Aldian-aldian egiaztatu kableatu-konexio guztiak ondo estuak eta korrosiorik gabe daudela ziurtatzeko.
- Aireztapena: Ensure that the ventilation openings on the charger are not blocked.
- Ingurumen-baldintzak: Operate the charger within its specified temperature and humidity ranges.
8. Arazoak
If you encounter issues with your BACM2420 charger, refer to the following common troubleshooting steps:
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Kargagailua ez da pizten | No AC input power; Faulty AC connection | Check AC power supply and connections. Ensure power outlet is functional. |
| Battery not charging (Red LED off) | Bateriaren konexio okerra; Bateriaren bolumenatage too low/high; Internal fault | Verify battery connections (B-, B+). Check battery voltage. Arazoak jarraitzen badu, jarri harremanetan laguntza-zerbitzuarekin. |
| Kargagailua gainberotuta | Poor ventilation; High ambient temperature; Overload | Ensure adequate airflow around the charger. Reduce ambient temperature if possible. Check battery for short circuits. |
| Failure output (LO) active | AC input interrupted | Check AC power supply and connections. |
| Bolumen baxuatage output (LO) active | Bateria boltage atalasearen azpitik | Check battery condition and charge level. |
If the problem persists after attempting these solutions, please contact SmartGen technical support.
9. Bermea eta Laguntza
For technical assistance, warranty claims, or further information regarding your SmartGen BACM2420 battery charger, please contact your authorized SmartGen dealer or visit the official SmartGen webgunea. Gorde erosketa-agiria erosketaren frogagiri gisa bermearen ondorioetarako.
