AMD Wraith Prism LED RGB Cooler Fan Instruction Manual

Sarrera

This manual provides comprehensive instructions for the installation, operation, and maintenance of your AMD Wraith Prism LED RGB Cooler Fan. Designed for optimal thermal performance and customizable aesthetics, this cooler is compatible with various AMD processor sockets. Please read this manual thoroughly before installation to ensure proper setup and functionality.

Produktuaren Ezaugarriak

• Official Genuine AMD Branded Product
• Aluminum heat sink with copper core base for efficient heat dissipation
• Direct Contact Heat pipes for enhanced thermal transfer
• Pre-applied thermal paste for convenient installation
• Switchable Overclock Fan profile for performance adjustment
• Integrated LED RGB lighting for customizable aesthetics

Paketearen edukia

Egiaztatu elementu guztiak zure paketean daudela:

• AMD Wraith Prism LED RGB Cooler Fan
• RGB cables (for motherboard connection and USB header)

Irudia: Goian view of the AMD Wraith Prism LED RGB Cooler Fan, showing the fan blades and AMD logo.

Irudia: Behealdea view of the AMD Wraith Prism LED RGB Cooler Fan, highlighting the copper heat pipes and aluminum fins.

Bateragarritasuna

The AMD Wraith Prism LED RGB Cooler Fan supports the following motherboard sockets:

• AM2
• AM3
• AM3+
• AM4

It is compatible with desktop systems.

Konfigurazioa eta Instalazioa

Before beginning installation, ensure your system is powered off and unplugged. Refer to your motherboard manual for specific CPU cooler mounting instructions if necessary.

1. Prestatu plaka basea: Ensure the CPU is correctly seated in its socket. The Wraith Prism cooler comes with pre-applied thermal paste, so no additional paste is typically needed unless you choose to replace it.
2. Hozkailua kokatu: Align the cooler's retention clips with the mounting brackets on your motherboard. The cooler can be oriented to allow the AMD logo to be readable from the top-left, or as preferred.
3. Seguru hozkailua: Attach one side of the cooler's retention clip to the motherboard bracket. Apply gentle, even pressure to the opposite side of the cooler while pushing down the second retention clip until it locks into place. Ensure the cooler is firmly seated and does not wobble.
4. Connect the Fan Power: Connect the 4-pin fan power cable from the cooler to the CPU_FAN header on your motherboard.
5. Adjust Fan Speed Switch: Locate the H/L (High/Low) fan speed switch on the side of the cooler. Set it to 'H' for higher maximum RPMs and increased cooling performance, or 'L' for quieter operation. This should be done before installing other components that might obstruct access.
6. Connect RGB Cables:
   • For motherboard RGB control: Connect the 4-pin RGB cable to a compatible 4-pin 12V RGB header on your motherboard.
   • For software RGB control (via AMD/Cooler Master software): Connect the USB 2.0 header cable to an available USB 2.0 header on your motherboard. Do not connect both the 4-pin RGB and USB 2.0 cables simultaneously for RGB control, as this can cause conflicts. Choose one method.

Funtzionamendua

Once installed and connected, the AMD Wraith Prism cooler will automatically begin operating when your system powers on. The fan speed will adjust based on CPU temperature, managed by your motherboard's fan control settings or the selected fan profile (H/L switch).

RGB argiaren kontrola

The Wraith Prism features customizable RGB lighting. You have two primary options for controlling the lighting:

• Plaka basearen softwarea: If you connected the 4-pin RGB cable to your motherboard, you can use your motherboard's proprietary RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion) to synchronize and control the cooler's lighting with other system components.
• AMD/Cooler Master Software: If you connected the USB 2.0 header cable, you can download and install the AMD Wraith Prism software (developed by Cooler Master) from the official AMD website. This software provides granular control over the cooler's RGB effects, including the fan, outer ring, and AMD logo. Note that using this software typically means the motherboard's RGB control will be overridden or disabled for the cooler.

Garrantzitsua: Do not connect both the 4-pin RGB cable and the USB 2.0 header cable for RGB control simultaneously. Choose one method to avoid potential conflicts or damage.

Mantentzea

Regular maintenance helps ensure optimal performance and longevity of your cooler.

• Hautsa kentzea: Periodically clean dust from the fan blades and heatsink fins using compressed air or a soft brush. Ensure the system is powered off before cleaning.
• Pasta termikoa: The pre-applied thermal paste is designed for long-term use. If you need to remove and re-install the cooler, it is recommended to clean off the old thermal paste from both the CPU and cooler base and apply new thermal paste.

Arazoak konpontzea

Zehaztapenak

Bermea eta Laguntza

For warranty information and technical support, please refer to the official AMD website or contact AMD customer service. Keep your proof of purchase for warranty claims.

Official AMD Support: www.amd.com/en/support