Beatfoxx FA-50 Soundspark Portable Bluetooth Speaker Instruction Manual

1. Sarrera

Eskerrik asko erosketagatik.asing the Beatfoxx FA-50 Soundspark Portable Bluetooth Speaker. This device combines a portable Bluetooth speaker with an LED flame effect, designed for outdoor and indoor use. Please read this manual carefully before operating the device to ensure proper use and to prevent damage.

2. Segurtasun informazioa

Observe the following safety guidelines to ensure safe operation and to prevent damage to the device or injury to yourself.

• Ez jarri gailua tenperatura altuen, eguzki-argiaren eraginpean edo hezetasun handiaren eraginpean.
• Keep the device away from water and other liquids. While the device is designed to withstand small splashes (IP65), it is not fully submersible.
• Do not attempt to disassemble, repair, or modify the device yourself. Contact qualified service personnel for any repairs.
• Use only the provided Micro USB cable for charging.
• Mantendu haurren eskura.
• Tokiko araudien arabera bota gailua eta bateria arduraz.

3. Paketearen edukia

Ziurtatu elementu guztiak paketean daudela:

• Beatfoxx FA-50 Soundspark Portable Bluetooth Speaker
• Mikro USB kargatzeko kablea
• Argibide eskuliburua (dokumentu hau)

4. Produktua amaitu daview

Familiarize yourself with the components and controls of your FA-50 Soundspark speaker.

Irudia: Goian view of the Beatfoxx FA-50 Soundspark speaker, highlighting the control panel with power, light, play/pause, and volume buttons.

4.1 Kontrol-panela

• Pizteko botoia (⏻): Sakatu eta eutsi pizteko/itzaltzeko.
• Argi botoia (💡): Press to turn the LED flame light on/off.
• Erreproduzitu/Pausatu botoia (⏸): Sakatu audioa erreproduzitzeko edo pausatzeko.
• Bolumena Jaisteko / Aurreko Pistaren Botoia (-): Press to decrease volume. Press and hold to go to the previous track.
• Bolumena igotzeko / Hurrengo abestiaren botoia (+): Press to increase volume. Press and hold to go to the next track.

4.2 Portuak eta adierazleak

• Mikro USB ataka: For charging the internal battery.
• LED adierazlea: Shows charging status and Bluetooth pairing status.
• 1/4 inch Camera Thread: Located on the bottom for mounting options.

5. Konfigurazioa

5.1 Bateria kargatzea

1. Connect the Micro USB charging cable to the Micro USB port on the speaker.
2. Konektatu kablearen beste muturra USB elikatze-egokitzaile batera (ez dago barne) edo ordenagailuaren USB atakara.
3. The LED indicator will illuminate to show charging status. It will change color or turn off when fully charged.
4. A full charge takes approximately 3-4 hours. The battery provides up to 13 hours of playback at background volume.

5.2 Piztu/Itzaltzea

• Pizteko, eduki sakatuta Pizteko botoia (⏻) for a few seconds until you hear an audible prompt and the LED indicator flashes.
• Itzaltzeko, luze sakatu Pizteko botoia (⏻) again for a few seconds until you hear an audible prompt and the LED indicator turns off.

6. Funtzionamendu-argibideak

6.1 Bluetooth parekatzea

To connect your FA-50 Soundspark speaker to a Bluetooth-enabled device:

1. Ensure the speaker is powered on and in pairing mode (LED indicator will be flashing rapidly).
2. Gaitu Bluetooth-a zure telefonoan, tabletan edo beste audio gailu batean.
3. Bilatu available Bluetooth devices. The speaker will appear as "FA-50 Soundspark" or similar.
4. Select "FA-50 Soundspark" from the list to pair. Once paired, the LED indicator will stop flashing and remain solid, and you will hear a confirmation sound.
5. Parekatzeak huts egiten badu, itzali bozgorailua eta gailuaren Bluetooth-a, eta errepikatu urratsak.

Image: The Beatfoxx FA-50 Soundspark speaker next to a smartphone, illustrating Bluetooth connectivity for music playback.

6.2 Musika erreproduzitzea

Behin parekatuta, musika erreprodukzioa zuzenean bozgorailutik edo konektatutako gailutik kontrola dezakezu:

• Erreproduzitu/Pausatu: sakatu Erreproduzitu/Pausatu botoia (⏸).
• Bolumenaren doikuntza: sakatu + botoia bolumena igotzeko, eta - bolumena jaisteko botoia.
• Hurrengo/Aurreko pista: Eduki sakatuta + button for the next track, and the - aurreko pistarako botoia.
• Sarrerako deiak: The speaker will automatically pause music playback for incoming calls and resume once the call ends.

6.3 LED Flame Light Function

The LED flame light can be operated independently of the speaker function.

• To turn the LED flame light on or off, press the Argi-botoia (💡).
• The light provides a realistic flame effect and does not generate heat.

Image: The Beatfoxx FA-50 Soundspark speaker displaying its LED flame effect, providing ambient lighting.

7. Mantentzea

7.1 Garbiketa

• Ziurtatu gailua itzalita eta energia-iturri guztietatik deskonektatuta dagoela garbitu aurretik.
• Garbitu kanpoaldea zapi leun eta lehor batekin.
• Ez erabili garbitzaile urratzailerik, disolbatzailerik edo produktu kimiko indartsurik.

7.2 Biltegiratzea

• Gorde bozgorailua leku fresko eta lehor batean, eguzki-argitik eta muturreko tenperaturetatik babestuta.
• Denbora luzez gordetzen baduzu, kargatu bateria aldian-aldian (adibidez, 3 hilabetero) bateriaren osasuna mantentzeko.

8. Arazoak

9. Zehaztapenak

10. Bermea eta Laguntza

Bermeari buruzko informazioa eta laguntza teknikoa lortzeko, erosketa unean emandako dokumentazioa kontsultatu edo zure saltzailearekin harremanetan jarri. Gorde erosketaren frogagiria bermearen erreklamazioetarako.