1. Sarrera
This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of the Sealey MCS01 Motorcycle Storage Shed. Please read this manual thoroughly before assembly and use to ensure safe and efficient operation. Keep this manual for future reference.
2. Segurtasun informazioa
OHARRA: Segurtasun-argibide hauek ez betetzeak lesioak edo produktua kaltetu dezake.
- Ziurtatu osagai guztiak daudela eta kalterik gabe muntatu aurretik.
- Gainazal lau eta egonkor batean muntatu.
- Do not attempt to assemble in strong winds.
- Secure the shed to the ground using appropriate anchors (not supplied) to prevent tipping in adverse weather conditions.
- Mantendu haurrak eta maskotak urrun muntatzean.
- Do not store flammable materials or hazardous chemicals inside the shed.
- Regularly inspect the shed for wear and tear, especially after severe weather.
3. Paketearen edukia
Egiaztatu osagai hauek guztiak zure paketean sartuta daudela:
- Main fabric cover
- Frame tubes (various lengths and shapes)
- Konektoreak/Junturak
- Fasteners (bolts, nuts, washers)
- Muntaketa argibideak (eskuliburu hau)
Piezaren bat falta edo hondatuta badago, jarri harremanetan zure hornitzailearekin berehala.
4. Muntaketa
Follow these steps carefully for proper assembly of your Sealey MCS01 Motorcycle Storage Shed.
4.1. Gunearen prestaketa
Choose a level, well-drained area for the shed. Clear any debris, rocks, or sharp objects that could damage the fabric cover.
4.2. Markoen Muntaketa
- Unpack all frame components and lay them out. Refer to the included diagram (if any, otherwise assume general steps).
- Connect the base frame tubes using the appropriate connectors. Ensure all connections are secure.
- Assemble the vertical and roof support tubes, gradually building the frame structure.
- Secure all joints with the provided fasteners, tightening them firmly but not excessively.
4.3. Estalkiaren instalazioa
- Carefully unfold the fabric cover.
- Drape the cover over the assembled frame, ensuring it is centered and aligned correctly.
- Secure the cover to the frame using the integrated straps, buckles, or ties. Ensure a snug fit to prevent flapping in the wind.
- Zip or fasten any closure points on the cover.

Figure 1: The Sealey MCS01 Motorcycle Storage Shed, fully assembled. It features a grey fabric cover stretched over a metal frame, designed to protect a motorcycle from the elements. The front opening is visible, secured by a zipper or similar closure mechanism.
4.4. Lurzoruko ainguratzea
For optimal stability, especially in windy conditions, it is highly recommended to anchor the shed to the ground. Use ground stakes, sandbags, or other suitable anchoring methods (not included) through the designated anchor points on the base frame.
5. Funtzionamendua (Erabilera)
The Sealey MCS01 shed is designed for convenient motorcycle storage.
- To open, unfasten the front closure (e.g., zipper, buckles) and lift the front section of the cover.
- Carefully ride or push your motorcycle into the shed. Ensure there is adequate clearance around the motorcycle.
- To close, lower the front section and secure all fasteners to protect the motorcycle from weather and dust.
- Ensure the shed is always closed when not in use to prevent damage from wind or rain.
6. Mantentzea
Regular maintenance will extend the life of your storage shed.
- Garbiketa: Clean the fabric cover periodically with mild soap and water. Do not use harsh chemicals or abrasive cleaners. Rinse thoroughly and allow to air dry completely before closing.
- Ikuskapena: Regularly inspect the frame for any signs of rust, bending, or damage. Check all fasteners for tightness.
- Estalkiaren zainketa: If the cover shows signs of wear, tears, or significant fading, consider replacing it to maintain protection.
- Neguan egitea: In areas with heavy snowfall, it is recommended to remove snow accumulation from the roof to prevent structural damage. Consider disassembling and storing the shed indoors during prolonged periods of extreme weather.
7. Arazoak
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Shed unstable/wobbly | Behar bezala ainguratuta ez; markoaren konexioak solteak. | Ensure shed is anchored to the ground. Tighten all frame fasteners. |
| Water pooling on cover | Improper cover tension; frame sag. | Re-tension the cover. Check frame for bending or incorrect assembly. |
| Difficulty opening/closing front | Zipper/fastener obstruction; misaligned frame. | Clear any obstructions. Check frame alignment. Lubricate zippers if necessary. |
8. Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Modelo zenbakia | MCS01 |
| Marka | Sealey |
| Neurriak (L x W x H) | 2700 x 1050 x 1550 mm (gutxi gorabehera) |
| Kolorea | Grisa |
| Pisua | 19.02 kg (gutxi gorabehera) |
| Materiala | Fabric cover, metal frame |
9. Produktu Ofizialen Bideoak
Ez dago saltzailearen produktuaren bideo ofizialik eskuragarri une honetan.
10. Bermea eta Laguntza
For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Sealey webgunea. Gorde erosketaren egiaztagiria bermearen erreklamazioetarako.
Sealey Ofiziala Webgunea: www.sealey.co.uk





