Artemide Tolomeo Mini 100W E26 Mahaia Lamp Erabiltzailearen eskuliburua

1. Sarrera

This manual provides comprehensive instructions for the safe and efficient use of your Artemide Tolomeo Mini 100W E26 Table Lamp. Please read this manual thoroughly before installation and operation, and retain it for future reference. The Artemide Tolomeo Mini is designed for indoor use, offering adjustable illumination with its articulated aluminum arm and shade.

2. Segurtasun informazioa

• Ziurtatu lamp is connected to a power source within the specified voltage sorta (120V).
• Do not exceed the maximum bulb wattage of 100W. Use an E26 (medium base) A19 compatible incandescent, compact fluorescent, or LED lamp.
• Always disconnect the power before cleaning, performing maintenance, or replacing the bulb.
• Saihestu l jartzeaamp in areas with excessive moisture or extreme temperatures.
• Ez saiatu l aldatzenamp's electrical components. Refer servicing to qualified personnel.
• Mantendu lamp material sukoietatik urrun.

3. Paketearen edukia

Muntaketa hasi aurretik, egiaztatu osagai guztiak daudela:

• Artemide Tolomeo Mini Lamp Arm and Head Assembly
• Aluminiozko Oinarria
• Itzala
• Elikatze kablea

Image 3.1: All components of the Artemide Tolomeo Mini Table Lamp, including the articulated arm, lamp head, base, and power cord.

4. Konfiguratzeko argibideak

1. Deskonprimitu osagaiak: Kontu handiz atera pieza guztiak paketetik eta jarri gainazal garbi eta lau batean.
2. Erantsi oinarria: Lotu lamp's articulated arm assembly to the aluminum base. Ensure the connection is firm and stable.
3. Instalatu bonbilla: Insert an E26 (medium base) A19 compatible bulb (not included) into the lamp head socket. Do not exceed 100W.
4. Kokatu Lamp: Jarri lamp gainazal egonkor eta lau batean.
5. Konektatu energia: Entxufatu korronte-kablea 120 V-ko entxufe elektriko estandar batean.

Image 4.1: The Artemide Tolomeo Mini Table Lamp fully assembled and ready for use.

5. Funtzionamendu-argibideak

• Piztu/Itzaltzea: Lamp features an On/Off switch located on the lamp head. Press or touch the switch to turn the light on or off.
• Posizioa doitzea: Lamp's arm structure, made of extruded aluminum, and joints with tension control knobs allow for full adjustability. Gently manipulate the arm and head to direct light as desired. The shade offers 360-degree rotation.

6. Mantentzea

• Garbiketa: Deskonektatu lamp from power. Use a soft, dry cloth to wipe down the aluminum surfaces and shade. Avoid abrasive cleaners or solvents.
• Bonbillaren ordezkoa: Ziurtatu lamp is unplugged and the bulb has cooled completely. Unscrew the old bulb and screw in a new E26 (medium base) A19 compatible bulb, not exceeding 100W.
• Artikulazioen tentsioa: The tension control knobs on the joints can be adjusted if the arm becomes too loose or too stiff. Turn clockwise to tighten, counter-clockwise to loosen.

7. Arazoak

Lamp ez du pizten:

Egiaztatu elikatze-kablea ondo konektatuta dagoen entxufean eta l-n.amp. Verify that the bulb is correctly installed and not burnt out. Test the outlet with another device.

Argi-distirak:

Ensure the bulb is screwed in tightly. If using an LED bulb, confirm it is dimmable if connected to a dimmer switch (though this lamp has an On/Off switch on the head). Try a different bulb.

Arm does not hold position:

Adjust the tension control knobs on the joints. Tighten them slightly until the arm holds its desired position.

8. Zehaztapenak

9. Bermea eta Laguntza

For warranty information, product support, or to inquire about replacement parts, please contact Artemide directly through their official website or customer service channels. Specific warranty terms and conditions may vary and are provided by the manufacturer.