Domus Line ST30/12 30W 12V Power Supply User Manual

Sarrera

This manual provides detailed instructions for the safe and efficient use of the Domus Line ST30/12 30W 12V Power Supply. Please read this manual thoroughly before installation and operation to ensure proper functionality and to prevent damage or injury. This power supply is designed for use with compatible lighting panels, including the TITAN series (maximum 5 panels), PASSEPARTOUT, SMALL, and DATE series.

Segurtasun-argibideak

Ensure the power supply is disconnected from the mains before any installation, maintenance, or troubleshooting.
This product is designed for indoor use only (IP20 rating). Do not expose it to moisture, water, or extreme temperatures.
Ez ireki elikatze-iturria casing. Ez dago erabiltzaileak konpondu beharreko piezarik barruan.
Ziurtatu aireztapen egokia unitatearen inguruan, gehiegi berotzea saihesteko.
Connect only compatible 12V DC devices within the specified load range (1-30W).
Konexio elektrikoei buruz ziur ez bazaude, instalazioa profesional kualifikatu batek egin beharko luke.

Konfigurazioa eta Instalazioa

Follow these steps for proper installation of your Domus Line ST30/12 power supply:

Deskonprimitu elikadura iturria: Carefully remove the ST30/12 power supply from its packaging. Inspect for any visible damage.
Muntatzea (aukerakoa): Position the power supply in a dry, well-ventilated area. Ensure it is not covered or enclosed in a way that restricts airflow.
Konektatu irteerako gailuak: The power supply features a 500 mm output cable with a 12-way distributor and MiniPlug connectors. Connect your compatible 12V DC lighting panels (e.g., TITAN, PASSEPARTOUT, SMALL, DATE series) to the MiniPlug ports on the distributor. Ensure the total load of connected devices does not exceed 30W.
Konektatu sare elektrikora: The power supply has a 2000 mm input cable. Plug the input cable into a standard 220-240Vac electrical outlet.
Egiaztatu funtzionamendua: Once connected, the lighting panels should illuminate. If not, refer to the Troubleshooting section.

Domus Line ST30/12 Power Supply with cables and connectors

Figure 1: Domus Line ST30/12 Power Supply. This image shows the compact design of the power supply unit, including its input and output cables with MiniPlug connectors, ready for connection to compatible 12V DC lighting systems.

Funtzionamendu-argibideak

The Domus Line ST30/12 power supply operates automatically once connected to a power source and compatible 12V DC devices. It converts the incoming AC voltage to a stable 12V DC output for your lighting applications.

Ziurtatu konexio guztiak seguru daudela piztu aurretik.
The power supply is designed for continuous operation within its specified load limits.
To turn off the connected devices, disconnect the power supply from the mains outlet.

Mantentzea

The Domus Line ST30/12 power supply requires minimal maintenance.

Garbiketa: Disconnect the power supply from the mains before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or abrasive materials.
Ikuskapena: Periodically check the cables and connectors for any signs of wear or damage. If any damage is found, discontinue use and replace the unit.
Aireztapena: Ziurtatu aireztapen-irekidurak ez daudela hautsez edo hondakinez blokeatuta.

Arazoak konpontzea

If you encounter issues with your Domus Line ST30/12 power supply, refer to the following common problems and solutions:

Arazoa	Kausa posiblea	Irtenbidea
Konektatutako gailuek ez dute korronterik jasotzen.	Elikatze iturria ez dago konektaturik. Hormako hartunea ez da funtzionatzen. Konexio solteak. Overload (total wattage exceeds 30W). Damaged power supply or cables.	Ensure the power supply is securely plugged into a live outlet. Probatu entxufea beste gailu batekin. Check all MiniPlug connections and the mains plug. Reduce the number of connected devices or replace with lower wattage gailuak. If damaged, discontinue use and replace the unit.
Devices flicker or dim.	Konexio etengabea. Gainkarga. Faulty device.	Egiaztatu konexio guztiak solteak diren. Ensure total load is within 30W. Test devices individually to identify a faulty one.
Power supply feels hot.	Funtzionamendu normala (berotasun apur bat). Aireztapen eskasa. Gainkarga.	Ziurtatu aire-fluxu egokia unitatearen inguruan. Verify total load does not exceed 30W. If excessively hot, disconnect immediately and check for overload or damage.

Irtenbide hauek probatu ondoren arazoa konpontzen ez bada, jarri harremanetan bezeroarentzako arreta-zerbitzuarekin.

Zehaztapenak

Marka:	Domus Line
Eredua:	ST30/12
Sarrera boltage:	220-240Vac
Irteera boltage:	12V DC
Irteera potentzia:	30 Watt
Karga-barrutia:	1 - 30 Watts (Note: Product description mentioned 1-15W, but title and other specs indicate 30W output. Use 1-30W as the operational range.)
Sarrerako kablearen luzera:	2000 mm
Irteerako kablearen luzera:	500 mm with 12-way distributor
Konektore mota:	MiniPlug
Insulation Degree:	II
Babes indizea:	IP20 (Barruko erabilera soilik)
Recommended Panels:	TITAN series (max 5 panels), PASSEPARTOUT, SMALL, DATE

Bermea eta Laguntza

Bermeari buruzko informazioa edo laguntza teknikoa lortzeko, jarri harremanetan zure saltzailearekin edo fabrikatzailearekin zuzenean. Gorde erosketa-agiria erosketaren frogagiri gisa.

Manufacturer: Domus Line

Note: Availability of spare parts and software updates is not specified by the manufacturer.