EPEVER 60A MPPT Eguzki-karga kontrolagailuaren erabiltzailearen eskuliburua

1. Sarrera

This manual provides instructions for the installation, operation, and maintenance of the EPEVER 60A MPPT Solar Charge Controller (Model 6415AN). This controller is designed for 12V/24V/36V/48V auto-sensing systems, features common negative grounding, and supports a maximum PV input of 150V and 4500W. It is compatible with various battery types, including lead-acid (sealed, gel, flooded) and lithium batteries.

Figure 1: EPEVER 60A MPPT Solar Charge Controller (Model 6415AN) showing front and back views with terminals.

2. Segurtasun-argibideak

• Ensure all wiring is correctly polarized and securely connected to prevent damage to the controller or batteries.
• Always connect the battery first, then the solar panel, and finally the load. Disconnect in reverse order.
• Instalatu kontrolatzailea ondo aireztatutako leku batean, material sukoietatik eta eguzki-argitik urrun.
• Use appropriate circuit breakers or fuses for all connections to protect against overcurrent.
• The controller is common negative ground. Ensure proper grounding for safety.

3. Produktua amaitu daview

The EPEVER Tracer AN series controller utilizes multiphase synchronous rectification technology (MSRT) and an advanced MPPT control algorithm. It features a dual-core processor architecture and common negative design, offering high response speed, reliability, and industrial standard performance.

2. irudia: Xehetasuna view of the EPEVER 60A MPPT Solar Charge Controller with key components labeled, including terminals, buttons, and indicators.

1. Metxa: Overcurrent protection for the battery circuit.
2. Bateriaren terminalak: Bateria bankura konektatzen da.
3. PV Terminals: Connects to the solar panel array.
4. Load Control Relay: Output for controlling external loads.
5. RBVS Port: Urruneko Bateria Voltage Sensor port.
6. Utility/Generator Relay ON: Relay for utility or generator control.
7. Utility/Generator Relay OFF: Relay for utility or generator control.
8. RS485 Port (5V/DC/200mA): Communication port for PC or remote meter.
9. RTS Port: Remote Temperature Sensor port.
10. Generator and Load Relay Enable: Terminal for enabling generator and load relays.
11. PV Reverse Polarity Alarm Indicator: LED indicator for incorrect PV polarity.
12. Lurreko terminalera: Sistemaren lurrerako konexiorako.
13. Aukeratu botoia: Used for navigating menus and changing settings.
14. Kargatzen LED adierazlea: Kargatzearen egoera adierazten du.
15. Fault LED Indicator: Sistemaren akatsak adierazten ditu.
16. ENTER botoia: Used for confirming selections and entering menus.

4. Konfigurazioa eta instalazioa

4.1 Kableatu-diagrama

3. irudia: Adibample connection diagram illustrating the wiring of the solar charge controller with PV array, battery bank, and load. Consult local and national electrical codes for compliance.

4.2 Instalazio-urratsak

1. Muntaketa: Mount the controller vertically on a non-flammable surface in a well-ventilated area, ensuring adequate clearance for heat dissipation.
2. Lurreratzea: Connect the grounding terminal to earth ground. The controller features common negative grounding.
3. Bateria konexioa: Connect the battery cables to the battery terminals on the controller. Ensure correct polarity (positive to positive, negative to negative). The PV input voltage must be at least 2V greater than the battery voltage to initiate charging.
4. PV Matrizearen Konexioa: Connect the solar panel cables to the PV terminals. Verify correct polarity. The maximum PV open circuit voltage-k ez du 150V-tik gorakoa izan behar.
5. Karga konexioa: Connect the load to the load control relay terminals.
6. Aukerako osagarriak: Connect the Remote Temperature Sensor (RTS) to the RTS Port and the Remote Battery Voltage Sensor (RBVS) to the RBVS Port for accurate temperature compensation and voltage neurketa.
7. Piztu: After all connections are secure and verified, the controller will power on automatically.

5. Funtzionamendu-argibideak

5.1 LCD Display and Interface

Figure 4: The LCD display shows various system parameters such as PV voltage, karga-korrontea, bateria boltage, load status, and energy statistics. The browse interface illustrates different screens accessible via the SELECT and ENTER buttons.

The LCD provides real-time system information. Use the AUKERATU button to navigate through different display screens and the SARTU button to confirm selections or enter settings menus.

5.2 Battery Type Settings

The controller supports various battery types. It is crucial to set the correct battery type for optimal charging and battery longevity. The supported types include:

• Zigilatua (lehenetsia)
• Gela
• Urpean
• Litioa
• User-defined (for custom parameters)

Access the battery type settings through the controller's menu using the SELECT and ENTER buttons or via the RS485 communication port with appropriate software/remote meter.

5.3 Komunikazio Interfazea

The controller features an RS-485 communication bus interface and supports the Modbus communication protocol. This allows for connection to a PC or a remote meter (e.g., MT50) for advanced monitoring, parameter setting, and data logging.

6. Mantentzea

Mantentze-lan erregularrak zure eguzki-karga-kontrolagailuaren iraupena eta errendimendu optimoa bermatzen ditu.

• Ikus-ikuskapena: Periodically check all wiring connections for tightness and corrosion. Ensure no insulation damage.
• Garbiketa: Keep the controller's heat sink and enclosure clean and free from dust or debris to ensure proper heat dissipation. Use a dry cloth for cleaning.
• Aireztapena: Ensure the installation area remains well-ventilated and free from obstructions that could impede airflow.
• Bateria osasuna: Kontrolatu bateria boltage and health regularly. Ensure battery terminals are clean and free of corrosion.

7. Arazoak

The controller includes a fault LED indicator to signal issues. Refer to the following common troubleshooting steps:

• Pantailarik ez/Energiarik ez:
  • Check battery connections and ensure they are secure and correctly polarized.
  • Egiaztatu bateria bolumenatage funtzionamendu-eremuaren barruan dago.
  • Check the battery fuse.
• No Charging from PV:
  • Check PV array connections and polarity. The PV reverse polarity alarm indicator will light up if polarity is incorrect.
  • Ziurtatu PV sarrera bolumenatage is at least 2V higher than battery voltage.
  • Verify solar panels are receiving adequate sunlight and are not shaded.
• Karga ez dabil:
  • Karga-konexioak egiaztatu eta ondo finkatuta daudela ziurtatu.
  • Verify load settings in the controller menu.
  • Ziurtatu bateria boltage is sufficient to power the load.
• Fault LED Indicator On:
  • Consult the detailed fault codes in the complete product manual (not provided here) for specific error identification. Common faults include over-voltage, bolumen azpikoatage, over-temperature, or short circuits.

8. Zehaztapenak

Figure 5: Dimensions of the EPEVER 60A MPPT Solar Charge Controller: Length 340mm, Width 236mm, Height 119mm.

Figure 6: Detailed technical specifications for the EPEVER Tracer AN Series, including the 6415AN model.

9. Bermearen informazioa

The EPEVER 60A MPPT Solar Charge Controller (Model 6415AN) comes with a manufacturer's warranty for 2 years from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.

10. Laguntza

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact EPEVER customer support. Refer to the official EPEVER website for the most up-to-date contact information and additional resources, including detailed manuals and software downloads.