Silvercrest SRD 600 B1 Rotary Shaver Instruction Manual

Sarrera

This manual provides essential information for the safe and efficient operation of your Silvercrest SRD 600 B1 Rotary Shaver. Please read these instructions carefully before first use and keep them for future reference. This device features a precision cutting system with dual-ring shaving heads and optimal contour adaptation for a comfortable shave.

Segurtasun Informazioa

Kontuz! Never use the shaver in or near water. Exercise caution when using stainless steel blades to prevent damage. Do not use the shaver for too long or on irritated skin. Use the shaver with caution when connected to power to prevent burns.

Produktua amaituview eta Osagaiak

Familiarize yourself with the various parts of your Silvercrest SRD 600 B1 Rotary Shaver.

1. irudia: Aurrealdea view of the Silvercrest SRD 600 B1 Rotary Shaver, showing the three rotary shaving heads and the power button.

2. irudia: Aldea view of the shaver, illustrating the integrated fold-out detail trimmer for precise grooming.

3. irudia: Close-up of the micro-USB charging port located at the bottom of the shaver for convenient power input.

4. irudia: The included power adapter and micro-USB charging cable used to power and recharge the shaver.

5. irudia: Aurrealdea view of the shaver highlighting the Magic-display, which shows battery percentage, cleaning reminder, blade replacement indicator, and travel lock status.

Konfigurazioa

Bizarra kargatzen

1. Connect the micro-USB charging cable to the charging port on the bottom of the shaver (refer to Figure 3).
2. Plug the power adapter into a suitable electrical outlet (refer to Figure 4).
3. The Magic-display (Figure 5) will indicate the charging status. A full charge takes approximately 60 minutes.
4. Once fully charged, the shaver provides approximately 60 minutes of cordless operating time.

Hasierako Erabilera

Ensure the shaver is fully charged before its first use. The device can also be used directly from the mains power supply if the battery is discharged, thanks to its direct drive function.

Funtzionamendu-argibideak

Bizarra egitea

1. Press the power button (located on the front, refer to Figure 1) to turn on the shaver.
2. Move the shaver gently over your skin in circular motions. The precision cutting system with dual-ring shaving heads and 3 spring-mounted shaving heads will adapt optimally to your facial contours for an efficient shave.
3. Emaitza onenak lortzeko, bizarra ilea hazteko norabidearen aurka.
4. Bizarra moztu ondoren, sakatu berriro pizteko botoia bizarra itzaltzeko.

Xehetasun Trimmer erabiliz

1. To activate the detail trimmer, slide it upwards from the back of the shaver (refer to Figure 2).
2. Use the trimmer for precise shaping of sideburns, mustaches, or other facial hair.
3. Once finished, push the trimmer back down until it clicks into place.

Mantentzea

Bizarra garbitzea

1. Ensure the shaver is turned off and disconnected from any power source before cleaning.
2. The shaving head unit can be folded open for easy access.
3. Use the included cleaning brush to remove hair residue from the shaving heads and the internal compartment.
4. The shaver head is IPX6 rated, meaning it is protected against strong jet water. You can rinse the shaving head unit under running water for a more thorough clean. Do not immerse the entire shaver in water.
5. Utzi bizarra egiteko makinaren burua airean guztiz lehortzen itxi edo bizarra egiteko makina gorde aurretik.

Pala ordezkatzea

The Magic-display (Figure 5) includes a reminder for blade replacement to ensure optimal shaving performance. When the blade replacement icon appears, it is recommended to replace the shaving heads. Specific instructions for replacing the blades are typically provided with replacement parts or can be found on the manufacturer's webgunea.

Arazoak konpontzea

• Bizarra ez da pizten: Ensure the battery is charged. Connect the shaver to the power adapter and check if the power outlet is functional. The shaver can be used directly from the mains if the battery is depleted.
• Bizarra mozteko errendimendu murriztua: Clean the shaving heads thoroughly as described in the Maintenance section. If performance remains poor, the blades may need replacement. Check the Magic-display for a blade replacement reminder.
• Bizarra moztu ondoren azaleko narritadura: Ensure the shaver heads are clean. Do not apply excessive pressure while shaving. Avoid using the shaver on skin that is already irritated or inflamed.
• Bizarra kargatzen ez da: Verify that the charging cable is securely connected to both the shaver and the power adapter, and that the adapter is plugged into a working electrical outlet.

Zehaztapenak

Bermea eta Laguntza

For warranty information, technical support, or to inquire about replacement parts, please refer to the documentation provided with your purchase. You may also contact the manufacturer, HOYER Handel GmbH, directly for assistance.