SIIG HDMI 2.0 Audio Extractor User Manual

1. Sarrera

This user manual provides detailed instructions for the installation, operation, and troubleshooting of the SIIG HDMI 2.0 Audio Extractor (Model: CE-H24F11-S1). This device is designed to split an incoming HDMI audio signal into stereo analog audio and Toslink optical outputs, enabling connection to various audio systems that may lack HDMI input.

The extractor supports high-resolution video up to 4K/60Hz with HDR and is compliant with HDCP 2.2. It also features ARC (Audio Return Channel) support via Toslink and CEC bypass, ensuring compatibility with modern home theater setups. Please read this manual thoroughly before use to ensure proper setup and optimal performance.

2. Produktuaren ezaugarriak

• HDMI 2.0a and HDCP 2.2 compliant.
• Supports HDCP 2.2, HDR, and CEC bypass.
• Video resolutions up to 4Kx2K@60Hz YUV 4:4:4 8-bit and 4K HDR YUV 4:2:0 10-bit.
• Supports 480p, 720p, 1080i, 1080p resolutions.
• Video bandwidth: 18Gbps (600MHz per channel).
• Audio extraction via 3.5mm stereo jack and Toslink optical output.
• ARC audio extraction via Toslink (S/PDIF).
• Supports audio embedded via stereo and S/PDIF (Toslink).
• Onartutako audio formatuak:
  • HDMI: PCM 2/5.1/7.1, Dolby 5.1/7.1, DTS 5.1/7.1
  • Toslink (S/PDIF): PCM 2, Dolby 5.1, DTS 5.1
  • 3.5mm Stereo: PCM 2
• Sturdy metal enclosure for durability and EMI/RFI noise interference minimization.
• ESD protection: ±15kV Air & ±8kV Contact.
• Country of origin: Taiwan.
• Regulatory approvals: FCC, CE, RoHS.

3. Paketearen edukia

Please verify that all items are present and in good condition. If any items are missing or damaged, contact your vendor for assistance.

• 1x HDMI 2.0 Audio Extractor/Embedder (CE-H24F11-S1)
• 1x USB Type-A to Micro B Cable (for power)
• 1x Installation Guide (this document)

4. Produktua amaitu daview and Port Descriptions

Aurrealdeko panela:

• 3.5 mm-ko estereo irteera: Connect to analog audio devices (e.g., headphones, stereo speakers).
• S/PDIF (Toslink) Output: Connect to digital optical audio receivers or soundbars.
• HDMI irteera: Connect to an HDMI display (e.g., TV, monitor, projector).
• Output Signal LED Indicator: Illuminates when an HDMI output signal is detected.
• Berrezarri botoia: Gailua berrezartzeko erabiltzen da.
• Slide Switch (FW/NORMAL Mode):
  • Left (FW): Firmware update mode.
  • Right (NORMAL): Normal operating mode. Ensure this is set to NORMAL for regular use.

Atzeko panela:

• Micro-USB Port (DC 5V): Connect the provided USB power cable for device power. Also used for firmware updates.
• Power LED adierazlea: Gailua piztuta dagoenean pizten da.
• Input Signal LED Indicator: HDMI sarrerako seinalea detektatzen denean pizten da.
• HDMI Sarrera: Connect to an HDMI source device (e.g., Blu-ray player, game console, streaming device).
• 4-pin DIP Switch: Used to configure EDID settings and enable/disable ARC and audio extraction functions.

5. Konfiguratzeko argibideak

Follow these steps to set up your SIIG HDMI 2.0 Audio Extractor:

1. Itzali gailuak: Ensure all source devices, displays, and audio systems are powered off before making any connections.
2. Konektatu HDMI sarrera: Connect an HDMI cable from your source device (e.g., Blu-ray player, game console) to the HDMI SARRERA port on the audio extractor.
3. Connect HDMI Output: Konektatu HDMI kable bat honetatik. HDMI OUT port on the audio extractor to your display device (e.g., TV, monitor, projector).
4. Connect Audio Output (Digital): For digital audio, connect a Toslink (optical) cable from the S/PDIF (Toslink) Output port on the extractor to your audio receiver, soundbar, or ampbiziagoa.
5. Connect Audio Output (Analog): For analog stereo audio, connect a 3.5mm audio cable from the 3.5 mm-ko irteera estereoa port on the extractor to your headphones or stereo speakers.
6. Konektatu energia: Connect the provided USB Type-A to Micro B cable to the Mikro-USB ataka (DC 5V) on the extractor and the other end to a USB power source (e.g., USB wall adapter, TV USB port). The Power LED Indicator will illuminate.
7. Verify Slide Switch: Ensure the slide switch on the front panel is set to the NORMALA position (right).
8. Piztu gailuak: Piztu pantaila, audio sistema eta iturburu gailua ordena horretan.

6. Funtzionamendu-argibideak

6.1 EDID and Function Configuration (DIP Switch)

The 4-pin DIP switch on the back panel allows you to configure the EDID (Extended Display Identification Data) settings and control the ARC and audio extraction functions. Adjust these settings based on your connected devices and desired audio output.

Oharra: After changing DIP switch settings, it is recommended to power cycle the audio extractor and all connected devices to ensure the new settings are applied correctly.

6.2 ARC (Audio Return Channel) Function

When ARC is enabled (PIN3 ON) and your display supports ARC, audio from your TV's internal tuner or smart apps can be sent back to the audio extractor via the HDMI cable and then output through the Toslink (S/PDIF) port to your audio system.

6.3 CEC Bypass

The device supports CEC (Consumer Electronics Control) bypass, allowing CEC commands to pass through the extractor to control connected HDMI devices. This means you can use a single remote to control multiple CEC-enabled devices in your setup.

7. Arazoak

If you encounter issues with the SIIG HDMI 2.0 Audio Extractor, please refer to the following common troubleshooting steps:

• Bideo-irteerarik ez:
  • Ziurtatu HDMI kable guztiak ondo konektatuta daudela.
  • Verify the input source is selected correctly on your display.
  • Check the power connection to the extractor; the Power LED should be illuminated.
  • Saiatu beste HDMI kable batekin.
  • Adjust DIP switch settings for EDID (PIN1 & PIN2) to match your display's capabilities or try "EDID bypass".
  • Power cycle all connected devices (source, extractor, display).
• No Audio Output (Toslink/3.5mm):
  • Ensure audio cables (Toslink or 3.5mm) are securely connected to the correct output ports on the extractor and input ports on your audio system.
  • Verify the audio input is selected correctly on your audio receiver/soundbar.
  • Check DIP switch PIN4 is set to ON to enable audio extraction.
  • If using ARC, ensure DIP switch PIN3 is set to ON and your TV's ARC function is enabled.
  • Confirm the audio format from your source is supported by your audio system and the extractor (refer to "Product Features" for supported formats). Some audio systems may not support certain multi-channel formats.
  • Try setting DIP switch PIN1: ON, PIN2: OFF for 2ch audio output if your audio system only supports stereo.
  • Power cycle all connected devices.
• Bideoa/Audioa tarteka:
  • Egiaztatu kable konexio solteak.
  • Ziurtatu elikadura-hornidura egonkorra dela.
  • Reduce cable lengths if possible, especially for HDMI.
  • Verify that the slide switch is in the NORMALA posizioa.
  • Test with different HDMI cables.
• HDR/4K Issues:
  • Ensure all connected HDMI cables are rated for HDMI 2.0 or higher and support 18Gbps bandwidth.
  • Verify your source and display devices both support 4K/60Hz and HDR.
  • Adjust EDID settings (PIN1 & PIN2) to ensure the correct video mode is selected.

8. Zehaztapenak

9. Mantentzea

The SIIG HDMI 2.0 Audio Extractor is designed for reliable operation with minimal maintenance.

• Garbiketa: Use a soft, dry cloth to clean the device. Avoid using liquid or aerosol cleaners, as they may damage the unit.
• Aireztapena: Ziurtatu gailua ondo aireztatutako leku batean dagoela gehiegi berotzea saihesteko. Ez blokeatu aireztapen-irekidurak.
• Biltegiratzea: Denbora luzez erabiltzen ez baduzu, gorde gailua leku fresko eta lehor batean, eguzki-argitik eta muturreko tenperaturetatik babestuta.
• Firmware eguneraketak: Periodically check the SIIG website for any available firmware updates for your model. Follow the instructions provided with the firmware update carefully.

10. Segurtasun informazioa

Please observe the following safety guidelines to prevent damage to the device and ensure user safety:

• Ez jarri gailua uraren edo gehiegizko hezetasunaren eraginpean.
• Ez saiatu gailua irekitzen edo aldatzen. Barruan ez dago erabiltzaileak konpondu dezakeen piezarik.
• Use only the provided power cable or a certified 5V USB power adapter.
• Mantendu gailua bero-iturrietatik, eguzki-argitik eta material sukoietatik urrun.
• Ensure proper grounding for all connected electrical equipment.

11. Bermea eta Laguntza Teknikoa

11.1 Bermearen informazioa

The SIIG HDMI 2.0 Audio Extractor (CE-H24F11-S1) comes with a 3 urteko bermea. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty documentation provided with your purchase or visit the official SIIG webgunea.

11.2 Laguntza Teknikoa

For technical assistance, product inquiries, or troubleshooting beyond the scope of this manual, please contact SIIG customer support.

• Webgunea: Visit the official SIIG weblaguntza baliabideetarako, maiz egiten diren galderetarako eta harremanetarako informaziorako gunea.
• Harremanetarako: Refer to your product packaging or the SIIG website for the most current contact details for technical support.