Sunco Lighting DL_SL6-14W

Sunco Lighting 6-Inch Ultra-Thin LED Recessed Light Manual

Model: DL_SL6-14W

Sarrera

This manual provides detailed instructions for the installation, operation, and maintenance of your Sunco Lighting 6-Inch Ultra-Thin LED Recessed Ceiling Lights. These 14W, 5000K Daylight fixtures are designed for easy installation without a can, featuring a wafer-thin profile and an integrated junction box. They offer seamless dimming capabilities and are IC rated for direct contact with insulation.

Segurtasun Informazioa

Kutxan dagoena

Pakete bakoitzak osagai hauek ditu:

Zehaztapenak

EzaugarriXehetasuna
Modelo zenbakiaDL_SL6-14W
Tamaina6 hazbetekoa
Kolore Tenperatura5000K Eguneko argia
Wattage14 Watt
Distira850 lumen
liburukiatage120 Volt
ErregulagarriaBai (% 10-% 100)
MaterialaPolycarbonate, Copper Wiring
Barruko/Kanpoko erabileraBarruan
ZiurtagiriakEnergy Star, ETL (5005842), FCC (L10), RoHS
Elementuaren pisua0.01 ontza (unitateko)
Produktuaren neurriak7 x 1 x 7 hazbete

Note: Efficiency is approximately 61 lumens per watt.

Diagram showing the dimensions of the 6-inch ultra-thin LED recessed light and its separate junction box.

Image: Detailed dimensions of the light fixture and junction box.

Konfigurazioa eta Instalazioa

These ultra-thin LED recessed lights are designed for easy, canless installation. Follow these steps for proper setup:

Beharrezko tresnak:

Instalazio urratsak:

  1. Itzali energia: Before starting, ensure the power to the installation area is turned off at the circuit breaker to prevent electrical shock.
  2. Cut Hole in Ceiling: Use a hole saw to cut a 6-inch diameter hole in the desired ceiling location. Ensure there are no obstructions (e.g., joists, pipes) behind the ceiling.
  3. Konektatu kableatzea: Open the junction box. Connect the house electrical wires to the fixture wires using the provided wire nuts:
    • Black (Live) to Black (Fixture)
    • White (Neutral) to White (Fixture)
    • Green or Bare Copper (Ground) to Green (Fixture)
    Securely close the junction box.
  4. Place Junction Box: Insert the junction box into the ceiling hole. The compact design allows it to sit above the ceiling.
  5. Install Light Fixture: Connect the light fixture to the junction box cable. Fold the spring-loaded clips on the side of the light fixture upwards and push the fixture into the ceiling hole. The clips will automatically snap down and hold the fixture securely in place.
  6. Proba Argia: Berrezarri korrontea etengailu elektrikoan eta probatu argi-gailua.
Diagram showing the installation of a recessed light with junction box and spring clips

Image: Installation diagram showing the junction box connected to house wiring and the light fixture with spring clips.

Bideoa: Amaiera batview of Sunco Lighting's commitment to quality and customer service, including product testing and design.

Funtzionamendu-argibideak

Your Sunco Lighting LED recessed lights are designed for simple operation and enhanced functionality.

Piztu/Itzali:

Operate the lights using a standard wall switch connected to the circuit. Flip the switch to turn the lights on or off.

Iluntzeko funtzionaltasuna:

These LED fixtures are fully dimmable from 10% to 100%. To utilize the dimming feature, ensure you have a compatible LED dimmer switch installed on the circuit. Adjust the dimmer switch to achieve your desired brightness level.

Image showing a room with recessed lights, split into two halves: one dark with lights at 10% brightness, and one bright with lights at 100% brightness, with a dimmer switch graphic.

Image: Visual representation of the smooth dimming capability from 10% to 100%.

Mantentzea

The Sunco Lighting LED recessed lights require minimal maintenance.

Arazoak konpontzea

If you encounter issues with your LED recessed lights, refer to the following common problems and solutions:

ArazoaKausa posibleaIrtenbidea
Argia ez da pizten.No power, loose wiring, faulty switch, or faulty fixture.Check circuit breaker. Verify all wire connections are secure. Test the switch. If issues persist, contact support.
Argia keinuka edo itzaltzen da modu irregularrean.Incompatible dimmer switch, loose wiring, or voltaggorabeherak.Ensure a compatible LED dimmer switch is used. Check wiring connections. Consult an electrician for voltage gaiak.
Argia ez da espero bezain distiratsua.Dimmer setting too low, or incorrect light placement.Adjust dimmer to 100%. Consider adding more fixtures for larger areas if needed.

Bermearen informazioa

Sunco Lighting-ek eskaintzen du Urtebeteko babesa warranty for this product. This warranty covers defects in materials and workmanship under normal use. For warranty claims or further details, please contact Sunco Lighting customer support.

Baliteke babes-plan gehigarriak erostea baimendutako saltzaileen bidez.

Laguntza

For technical assistance, troubleshooting, or warranty inquiries, please contact Sunco Lighting customer support. Our knowledgeable specialists are available to assist you.

Bisitatu Sunco Lighting ofiziala webharremanetarako informazioa eta baliabide gehigarriak lortzeko gunea: www.suncolighting.com